[PATCH v3 00/16] arm/arm64: Turning IPIs into normal interrupts

[hasegawa-hitomi at fujitsu.com]

Hi Marc.

I am interested in this feature.
I have confirmed this patch works fine on Fujitsu FX1000. Thanks for creating it.
I look forward to the day when this patch is merged.
We plan to post a patch that implements IPI for CPU stop Interrupt (for crash dump) with pseudo NMI.

Tested-by: Hitomi Hasegawa <hasegwa-hitomi at fujitsu.com>
Thanks.

-----Original Message-----
From: linux-arm-kernel <linux-arm-kernel-bounces at lists.infradead.org> On Behalf Of Marc Zyngier
Sent: Tuesday, September 1, 2020 11:43 PM
To: linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
Cc: Sumit Garg <sumit.garg at linaro.org>; kernel-team at android.com; Florian Fainelli <f.fainelli at gmail.com>; Russell King <linux at arm.linux.org.uk>; Jason Cooper <jason at lakedaemon.net>; Saravana Kannan <saravanak at google.com>; Andrew Lunn <andrew at lunn.ch>; Catalin Marinas <catalin.marinas at arm.com>; Gregory Clement <gregory.clement at bootlin.com>; Thomas Gleixner <tglx at linutronix.de>; Will Deacon <will at kernel.org>; Valentin Schneider <Valentin.Schneider at arm.com>
Subject: [PATCH v3 00/16] arm/arm64: Turning IPIs into normal interrupts

For as long as SMP ARM has existed, IPIs have been handled as something special. The arch code and the interrupt controller exchange a couple of hooks (one to generate an IPI, another to handle it).

Although this is perfectly manageable, it prevents the use of features that we could use if IPIs were Linux IRQs (such as pseudo-NMIs). It also means that each interrupt controller driver has to follow an architecture-specific interface instead of just implementing the base irqchip functionalities. The arch code also duplicates a number of things that the core irq code already does (such as calling set_irq_regs(), irq_enter()...).

This series tries to remedy this on arm/arm64 by offering a new registration interface where the irqchip gives the arch code a range of interrupts to use for IPIs. The arch code requests these as normal per-cpu interrupts.

The bulk of the work is at the interrupt controller level, where all 5 irqchips used on arm+SMP/arm64 get converted.

Finally, we drop the legacy registration interface as well as the custom statistics accounting.

Note that I have had a look at providing a "generic" interface by expanding the kernel/irq/ipi.c bag of helpers, but so far all irqchips have very different requirements, so there is hardly anything to consolidate for now. Maybe some as hip04 and the Marvell horror get cleaned up (the latter certainly could do with a good dusting).

This has been tested on a bunch of 32 and 64bit guests (GICv2, GICv3), as well as 64bit bare metal (GICv3). The RPi part has only been tested in QEMU as a 64bit guest, while the HiSi and Marvell parts have only been compile-tested.

I'm aiming for 5.10 for this, so any comment would be appreciated.

* From v2:
  - Tidied up the arch code (__read_mostly for the IPI handling data,
    WARN_ON_ONCE on setup and teardown), dropped spurious prototype
    on 32bit
  - Prevent IPIs from being forwarded to VCPUs
  - Merged the GIC affinity fix, hence one less patch
  - Added RBs from Valentin

* From v1:
  - Clarified the effect of nesting irq_enter/exit (Russell)
  - Changed the point where we tear IPIs down on (Valentin)
  - IPIs are no longer accessible from DT
  - HIP04 and Armada 370-XP have been converted, but are untested
  - arch-specific kstat accounting is removed
  - ARM's legacy interface is dropped

Marc Zyngier (16):
  genirq: Add fasteoi IPI flow
  genirq: Allow interrupts to be excluded from /proc/interrupts
  arm64: Allow IPIs to be handled as normal interrupts
  ARM: Allow IPIs to be handled as normal interrupts
  irqchip/gic-v3: Describe the SGI range
  irqchip/gic-v3: Configure SGIs as standard interrupts
  irqchip/gic: Refactor SMP configuration
  irqchip/gic: Configure SGIs as standard interrupts
  irqchip/gic-common: Don't enable SGIs by default
  irqchip/bcm2836: Configure mailbox interrupts as standard interrupts
  irqchip/hip04: Configure IPIs as standard interrupts
  irqchip/armada-370-xp: Configure IPIs as standard interrupts
  arm64: Kill __smp_cross_call and co
  arm64: Remove custom IRQ stat accounting
  ARM: Kill __smp_cross_call and co
  ARM: Remove custom IRQ stat accounting

 arch/arm/Kconfig                    |   1 +
 arch/arm/include/asm/hardirq.h      |  17 --
 arch/arm/include/asm/smp.h          |   5 +-
 arch/arm/kernel/smp.c               | 135 +++++++++-----
 arch/arm64/Kconfig                  |   1 +
 arch/arm64/include/asm/hardirq.h    |   9 -
 arch/arm64/include/asm/irq_work.h   |   4 +-
 arch/arm64/include/asm/smp.h        |   6 +-
 arch/arm64/kernel/smp.c             | 121 ++++++++-----
 drivers/irqchip/irq-armada-370-xp.c | 262 +++++++++++++++++++---------
 drivers/irqchip/irq-bcm2836.c       | 151 +++++++++++++---
 drivers/irqchip/irq-gic-common.c    |   3 -
 drivers/irqchip/irq-gic-v3.c        | 104 ++++++-----
 drivers/irqchip/irq-gic.c           | 177 +++++++++++--------
 drivers/irqchip/irq-hip04.c         |  89 +++++-----
 include/linux/irq.h                 |   5 +-
 kernel/irq/chip.c                   |  27 +++
 kernel/irq/debugfs.c                |   1 +
 kernel/irq/proc.c                   |   2 +-
 kernel/irq/settings.h               |   7 +
 20 files changed, 720 insertions(+), 407 deletions(-)

--
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel