[PATCH 1/3] dt-bindings: extcon: Document Type-C Virtual PD driver

[Jagan Teki]

USB Type-C protocol supports various modes of operations
includes PD, USB3, and Altmode. If the platform design
supports a Type-C connector then configuring these modes
can be done via enumeration.

However, there are some platforms that design these modes
of operations as separate protocol connectors like design
Display Port from on-chip USB3 controller. So accessing
Type-C Altmode Display Port via onboard Display Port
connector instead of a Type-C connector.

These kinds of platforms require an explicit extcon driver
in order to handle Power Delivery and Port Detection.

Document dt-bindings for it.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 .../extcon/extcon-usbc-virtual-pd.yaml        | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usbc-virtual-pd.yaml

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-virtual-pd.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-virtual-pd.yaml
new file mode 100644
index 000000000000..8110fbe2ddc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-virtual-pd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/extcon-usbc-virtual-pd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Type-C Virtual PD extcon
+
+maintainers:
+  - Jagan Teki <jagan at amarulasolutions.com>
+
+description: |
+  USB Type-C protocol supports various modes of operations includes PD,
+  USB3, and Altmode. If the platform design supports a Type-C connector
+  then configuring these modes can be done via enumeration.
+
+  However, there are some platforms that design these modes as separate
+  protocol connectors like design Display Port from on-chip USB3 controller.
+  So we can access Type-C Altmode Display Port via onboard Display Port
+  connector instead of a Type-C connector. These kinds of platforms require
+  an explicit extcon driver in order to handle Power Delivery and
+  Port Detection.
+
+properties:
+  compatible:
+    const: linux,extcon-usbc-virtual-pd
+
+  det-gpios:
+    description: Detect GPIO pin. Pin can be Display Port Detect or USB ID.
+    maxItems: 1
+
+  vpd-polarity:
+    description: USB Type-C Polarity. false for Normal and true for Flip.
+    type: boolean
+
+  vpd-super-speed:
+    description: USB Super Speed. false for USB2 and true for USB3.
+    type: boolean
+
+  vpd-data-role:
+    description: USB Data roles for Virtual Type-C.
+    $ref: /schemas/types.yaml#definitions/string
+
+    enum:
+      - host
+      - device
+      - display-port
+
+required:
+  - compatible
+  - det-gpios
+  - vpd-data-role
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    virtual_pd: virtual-pd {
+        compatible = "linux,extcon-usbc-virtual-pd";
+        det-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
+        vpd-data-role = "display-port";
+        vpd-super-speed;
+    };
-- 
2.25.1