[PATCH v2 03/14] arm64: dts: imx8mm-evk: Align pin configuration group names with schema

Krzysztof Kozlowski krzk at kernel.org
Fri Sep 4 02:27:32 EDT 2020


Device tree schema expects pin configuration groups to end with 'grp'
suffix, otherwise dtbs_check complain with a warning like:

    ... do not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 1c39a2b90ee1..27e54583a8e4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -456,13 +456,13 @@
 		>;
 	};
 
-	pinctrl_pmic: pmicirq {
+	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
 		>;
 	};
 
-	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
 		>;
@@ -490,7 +490,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
 		>;
@@ -508,7 +508,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
@@ -520,7 +520,7 @@
 		>;
 	};
 
-	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
 			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
@@ -548,7 +548,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
@@ -564,7 +564,7 @@
 		>;
 	};
 
-	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
 			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
-- 
2.17.1




More information about the linux-arm-kernel mailing list