[RFC PATCH] cma: make number of CMA areas dynamic, remove CONFIG_CMA_AREAS

Roman Gushchin guro at fb.com
Thu Sep 3 16:34:24 EDT 2020


On Wed, Sep 02, 2020 at 08:02:04PM -0700, Mike Kravetz wrote:
> The number of distinct CMA areas is limited by the constant
> CONFIG_CMA_AREAS.  In most environments, this was set to a default
> value of 7.  Not too long ago, support was added to allocate hugetlb
> gigantic pages from CMA.  More recent changes to make dma_alloc_coherent
> NUMA-aware on arm64 added more potential users of CMA areas.  Along
> with the dma_alloc_coherent changes, the default value of CMA_AREAS
> was bumped up to 19 if NUMA is enabled.
> 
> It seems that the number of CMA users is likely to grow.  Instead of
> using a static array for cma areas, use a simple linked list.  These
> areas are used before normal memory allocators, so use the memblock
> allocator.
> 
> Signed-off-by: Mike Kravetz <mike.kravetz at oracle.com>

Sounds like a good idea!
That 7 always confused me.

Acked-by: Roman Gushchin <guro at fb.com>

Thank you!

> ---
>  arch/arm/mm/dma-mapping.c              | 29 ++++++++++++-------
>  arch/mips/configs/cu1000-neo_defconfig |  1 -
>  arch/mips/configs/cu1830-neo_defconfig |  1 -
>  include/linux/cma.h                    | 12 --------
>  mm/Kconfig                             | 12 --------
>  mm/cma.c                               | 40 +++++++++++++-------------
>  mm/cma.h                               |  4 +--
>  mm/cma_debug.c                         |  6 ++--
>  8 files changed, 44 insertions(+), 61 deletions(-)
> 
> diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
> index 8a8949174b1c..a35a760cc0f4 100644
> --- a/arch/arm/mm/dma-mapping.c
> +++ b/arch/arm/mm/dma-mapping.c
> @@ -383,25 +383,34 @@ postcore_initcall(atomic_pool_init);
>  struct dma_contig_early_reserve {
>  	phys_addr_t base;
>  	unsigned long size;
> +	struct list_head areas;
>  };
>  
> -static struct dma_contig_early_reserve dma_mmu_remap[MAX_CMA_AREAS] __initdata;
> -
> -static int dma_mmu_remap_num __initdata;
> +static __initdata LIST_HEAD(dma_mmu_remap_areas);
>  
>  void __init dma_contiguous_early_fixup(phys_addr_t base, unsigned long size)
>  {
> -	dma_mmu_remap[dma_mmu_remap_num].base = base;
> -	dma_mmu_remap[dma_mmu_remap_num].size = size;
> -	dma_mmu_remap_num++;
> +	struct dma_contig_early_reserve *d;
> +
> +	d = memblock_alloc(sizeof(struct dma_contig_early_reserve),
> +			sizeof(void *));
> +	if (!d) {
> +		pr_err("Unable to allocate dma_contig_early_reserve struct!\n");
> +		return;
> +	}
> +
> +	d->base = base;
> +	d->size = size;
> +	list_add_tail(&d->areas, &dma_mmu_remap_areas);
>  }
>  
>  void __init dma_contiguous_remap(void)
>  {
> -	int i;
> -	for (i = 0; i < dma_mmu_remap_num; i++) {
> -		phys_addr_t start = dma_mmu_remap[i].base;
> -		phys_addr_t end = start + dma_mmu_remap[i].size;
> +	struct dma_contig_early_reserve *d;
> +
> +	list_for_each_entry(d, &dma_mmu_remap_areas, areas) {
> +		phys_addr_t start = d->base;
> +		phys_addr_t end = start + d->size;
>  		struct map_desc map;
>  		unsigned long addr;
>  
> diff --git a/arch/mips/configs/cu1000-neo_defconfig b/arch/mips/configs/cu1000-neo_defconfig
> index e924c817f73d..b86f3fd420f2 100644
> --- a/arch/mips/configs/cu1000-neo_defconfig
> +++ b/arch/mips/configs/cu1000-neo_defconfig
> @@ -31,7 +31,6 @@ CONFIG_HZ_100=y
>  # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>  # CONFIG_COMPACTION is not set
>  CONFIG_CMA=y
> -CONFIG_CMA_AREAS=7
>  CONFIG_NET=y
>  CONFIG_PACKET=y
>  CONFIG_UNIX=y
> diff --git a/arch/mips/configs/cu1830-neo_defconfig b/arch/mips/configs/cu1830-neo_defconfig
> index cbfb62900273..98a31334fc57 100644
> --- a/arch/mips/configs/cu1830-neo_defconfig
> +++ b/arch/mips/configs/cu1830-neo_defconfig
> @@ -31,7 +31,6 @@ CONFIG_HZ_100=y
>  # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
>  # CONFIG_COMPACTION is not set
>  CONFIG_CMA=y
> -CONFIG_CMA_AREAS=7
>  CONFIG_NET=y
>  CONFIG_PACKET=y
>  CONFIG_UNIX=y
> diff --git a/include/linux/cma.h b/include/linux/cma.h
> index 217999c8a762..ea9a3dab0c20 100644
> --- a/include/linux/cma.h
> +++ b/include/linux/cma.h
> @@ -6,18 +6,6 @@
>  #include <linux/types.h>
>  #include <linux/numa.h>
>  
> -/*
> - * There is always at least global CMA area and a few optional
> - * areas configured in kernel .config.
> - */
> -#ifdef CONFIG_CMA_AREAS
> -#define MAX_CMA_AREAS	(1 + CONFIG_CMA_AREAS)
> -
> -#else
> -#define MAX_CMA_AREAS	(0)
> -
> -#endif
> -
>  #define CMA_MAX_NAME 64
>  
>  struct cma;
> diff --git a/mm/Kconfig b/mm/Kconfig
> index 7d56281ff41e..a52345093f4d 100644
> --- a/mm/Kconfig
> +++ b/mm/Kconfig
> @@ -513,18 +513,6 @@ config CMA_DEBUGFS
>  	help
>  	  Turns on the DebugFS interface for CMA.
>  
> -config CMA_AREAS
> -	int "Maximum count of the CMA areas"
> -	depends on CMA
> -	default 19 if NUMA
> -	default 7
> -	help
> -	  CMA allows to create CMA areas for particular purpose, mainly,
> -	  used as device private area. This parameter sets the maximum
> -	  number of CMA area in the system.
> -
> -	  If unsure, leave the default value "7" in UMA and "19" in NUMA.
> -
>  config MEM_SOFT_DIRTY
>  	bool "Track memory changes"
>  	depends on CHECKPOINT_RESTORE && HAVE_ARCH_SOFT_DIRTY && PROC_FS
> diff --git a/mm/cma.c b/mm/cma.c
> index 7f415d7cda9f..2bd61137b2ca 100644
> --- a/mm/cma.c
> +++ b/mm/cma.c
> @@ -36,8 +36,9 @@
>  
>  #include "cma.h"
>  
> -struct cma cma_areas[MAX_CMA_AREAS];
> -unsigned cma_area_count;
> +/* modify here */
> +LIST_HEAD(cma_areas);
> +static unsigned int cma_area_count;
>  static DEFINE_MUTEX(cma_mutex);
>  
>  phys_addr_t cma_get_base(const struct cma *cma)
> @@ -143,10 +144,10 @@ static void __init cma_activate_area(struct cma *cma)
>  
>  static int __init cma_init_reserved_areas(void)
>  {
> -	int i;
> +	struct cma *c;
>  
> -	for (i = 0; i < cma_area_count; i++)
> -		cma_activate_area(&cma_areas[i]);
> +	list_for_each_entry(c, &cma_areas, areas)
> +		cma_activate_area(c);
>  
>  	return 0;
>  }
> @@ -172,15 +173,14 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
>  	struct cma *cma;
>  	phys_addr_t alignment;
>  
> -	/* Sanity checks */
> -	if (cma_area_count == ARRAY_SIZE(cma_areas)) {
> -		pr_err("Not enough slots for CMA reserved regions!\n");
> -		return -ENOSPC;
> -	}
> +	/* Do not attempt allocations after memblock allocator is torn down */
> +	if (slab_is_available())
> +		return -EINVAL;
>  
>  	if (!size || !memblock_is_region_reserved(base, size))
>  		return -EINVAL;
>  
> +
>  	/* ensure minimal alignment required by mm core */
>  	alignment = PAGE_SIZE <<
>  			max_t(unsigned long, MAX_ORDER - 1, pageblock_order);
> @@ -192,12 +192,17 @@ int __init cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
>  	if (ALIGN(base, alignment) != base || ALIGN(size, alignment) != size)
>  		return -EINVAL;
>  
> +	cma = memblock_alloc(sizeof(struct cma), sizeof(long));
> +	if (!cma) {
> +		pr_err("Unable to allocate CMA descriptor!\n");
> +		return -ENOSPC;
> +	}
> +	list_add_tail(&cma->areas, &cma_areas);
> +
>  	/*
>  	 * Each reserved area must be initialised later, when more kernel
>  	 * subsystems (like slab allocator) are available.
>  	 */
> -	cma = &cma_areas[cma_area_count];
> -
>  	if (name)
>  		snprintf(cma->name, CMA_MAX_NAME, name);
>  	else
> @@ -253,11 +258,6 @@ int __init cma_declare_contiguous_nid(phys_addr_t base,
>  	pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
>  		__func__, &size, &base, &limit, &alignment);
>  
> -	if (cma_area_count == ARRAY_SIZE(cma_areas)) {
> -		pr_err("Not enough slots for CMA reserved regions!\n");
> -		return -ENOSPC;
> -	}
> -
>  	if (!size)
>  		return -EINVAL;
>  
> @@ -530,10 +530,10 @@ bool cma_release(struct cma *cma, const struct page *pages, unsigned int count)
>  
>  int cma_for_each_area(int (*it)(struct cma *cma, void *data), void *data)
>  {
> -	int i;
> +	struct cma *c;
>  
> -	for (i = 0; i < cma_area_count; i++) {
> -		int ret = it(&cma_areas[i], data);
> +	list_for_each_entry(c, &cma_areas, areas) {
> +		int ret = it(c, data);
>  
>  		if (ret)
>  			return ret;
> diff --git a/mm/cma.h b/mm/cma.h
> index 42ae082cb067..fed800b63819 100644
> --- a/mm/cma.h
> +++ b/mm/cma.h
> @@ -15,11 +15,11 @@ struct cma {
>  	spinlock_t mem_head_lock;
>  	struct debugfs_u32_array dfs_bitmap;
>  #endif
> +	struct list_head areas;
>  	char name[CMA_MAX_NAME];
>  };
>  
> -extern struct cma cma_areas[MAX_CMA_AREAS];
> -extern unsigned cma_area_count;
> +extern struct list_head cma_areas;
>  
>  static inline unsigned long cma_bitmap_maxno(struct cma *cma)
>  {
> diff --git a/mm/cma_debug.c b/mm/cma_debug.c
> index d5bf8aa34fdc..c39695d50224 100644
> --- a/mm/cma_debug.c
> +++ b/mm/cma_debug.c
> @@ -188,12 +188,12 @@ static void cma_debugfs_add_one(struct cma *cma, struct dentry *root_dentry)
>  static int __init cma_debugfs_init(void)
>  {
>  	struct dentry *cma_debugfs_root;
> -	int i;
> +	struct cma *c;
>  
>  	cma_debugfs_root = debugfs_create_dir("cma", NULL);
>  
> -	for (i = 0; i < cma_area_count; i++)
> -		cma_debugfs_add_one(&cma_areas[i], cma_debugfs_root);
> +	list_for_each_entry(c, &cma_areas, areas)
> +		cma_debugfs_add_one(c, cma_debugfs_root);
>  
>  	return 0;
>  }
> -- 
> 2.25.4
> 



More information about the linux-arm-kernel mailing list