[PATCH v2 05/20] ASoC: sun4i-i2s: Set sign extend sample
Clément Péron
peron.clem at gmail.com
Thu Sep 3 16:30:19 EDT 2020
From: Marcus Cooper <codekipper at gmail.com>
On the newer SoCs such as the H3 and A64 this is set by default
to transfer a 0 after each sample in each slot. However the A10
and A20 SoCs that this driver was developed on had a default
setting where it padded the audio gain with zeros.
This isn't a problem while we have only support for 16bit audio
but with larger sample resolution rates in the pipeline then SEXT
bits should be cleared so that they also pad at the LSB. Without
this the audio gets distorted.
Set sign extend sample for all the sunxi generations even if they
are not affected. This will keep consistency and avoid relying on
default.
Signed-off-by: Marcus Cooper <codekipper at gmail.com>
Signed-off-by: Clément Péron <peron.clem at gmail.com>
---
sound/soc/sunxi/sun4i-i2s.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 1b4482b0f4af..13e64180e917 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -48,6 +48,9 @@
#define SUN4I_I2S_FMT0_FMT_I2S (0 << 0)
#define SUN4I_I2S_FMT1_REG 0x08
+#define SUN4I_I2S_FMT1_REG_SEXT_MASK BIT(8)
+#define SUN4I_I2S_FMT1_REG_SEXT(sext) ((sext) << 8)
+
#define SUN4I_I2S_FIFO_TX_REG 0x0c
#define SUN4I_I2S_FIFO_RX_REG 0x10
@@ -105,6 +108,9 @@
#define SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED (1 << 7)
#define SUN8I_I2S_FMT0_BCLK_POLARITY_NORMAL (0 << 7)
+#define SUN8I_I2S_FMT1_REG_SEXT_MASK GENMASK(5, 4)
+#define SUN8I_I2S_FMT1_REG_SEXT(sext) ((sext) << 4)
+
#define SUN8I_I2S_INT_STA_REG 0x0c
#define SUN8I_I2S_FIFO_TX_REG 0x20
@@ -671,6 +677,7 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
}
regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
SUN4I_I2S_CTRL_MODE_MASK, val);
+
return 0;
}
@@ -767,6 +774,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
val);
+ /* Set sign extension to pad out LSB with 0 */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+ SUN8I_I2S_FMT1_REG_SEXT_MASK,
+ SUN8I_I2S_FMT1_REG_SEXT(0));
+
return 0;
}
@@ -863,6 +875,11 @@ static int sun50i_h6_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
val);
+ /* Set sign extension to pad out LSB with 0 */
+ regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
+ SUN8I_I2S_FMT1_REG_SEXT_MASK,
+ SUN8I_I2S_FMT1_REG_SEXT(0));
+
return 0;
}
--
2.25.1
More information about the linux-arm-kernel
mailing list