[PATCH 14/20] usb/phy: mxs-usb: Use pm_ptr() macro

[Paul Cercueil]

Use the newly introduced pm_ptr() macro, and mark the suspend/resume
functions __maybe_unused. These functions can then be moved outside the
CONFIG_PM_SUSPEND block, and the compiler can then process them and
detect build failures independently of the config. If unused, they will
simply be discarded by the compiler.

Signed-off-by: Paul Cercueil <paul at crapouillou.net>
---
 drivers/usb/phy/phy-mxs-usb.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 67b39dc62b37..c5e32d51563f 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -815,8 +815,8 @@ static int mxs_phy_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+static void __maybe_unused
+mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
 {
 	unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
 
@@ -832,7 +832,7 @@ static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
 			reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
 }
 
-static int mxs_phy_system_suspend(struct device *dev)
+static int __maybe_unused mxs_phy_system_suspend(struct device *dev)
 {
 	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 
@@ -842,7 +842,7 @@ static int mxs_phy_system_suspend(struct device *dev)
 	return 0;
 }
 
-static int mxs_phy_system_resume(struct device *dev)
+static int __maybe_unused mxs_phy_system_resume(struct device *dev)
 {
 	struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
 
@@ -851,7 +851,6 @@ static int mxs_phy_system_resume(struct device *dev)
 
 	return 0;
 }
-#endif /* CONFIG_PM_SLEEP */
 
 static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
 		mxs_phy_system_resume);
@@ -862,7 +861,7 @@ static struct platform_driver mxs_phy_driver = {
 	.driver = {
 		.name = DRIVER_NAME,
 		.of_match_table = mxs_phy_dt_ids,
-		.pm = &mxs_phy_pm,
+		.pm = pm_ptr(&mxs_phy_pm),
 	 },
 };
 
-- 
2.28.0