[PATCH v11 3/5] firmware: xilinx: Add RPU configuration APIs

[Punit Agrawal]

Hi Ben,

Noticed some issues while going through the code. A couple of queries
below.

Ben Levinsky <ben.levinsky at xilinx.com> writes:

> This patch adds APIs to access to configure RPU and its
> processor-specific memory.
>
> That is query the run-time mode of RPU as either split or lockstep as well
> as API to set this mode. In addition add APIs to access configuration of
> the RPUs' tightly coupled memory (TCM).
>
> Signed-off-by: Ben Levinsky <ben.levinsky at xilinx.com>
> ---
> v3:
> - add xilinx-related platform mgmt fn's instead of wrapping around
>   function pointer in xilinx eemi ops struct
> v4:
> - add default values for enums
> v9:
> - update commit message
> - for zynqmp_pm_set_tcm_config and zynqmp_pm_get_rpu_mode update docs for
>   expected output, arguments as well removing unused args
> - remove unused fn zynqmp_pm_get_node_status
> v11:
> - update usage of zynqmp_pm_get_rpu_mode to return rpu mode in enum
> - update zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode arguments to remove unused args
> ---
>  drivers/firmware/xilinx/zynqmp.c     | 59 ++++++++++++++++++++++++++++
>  include/linux/firmware/xlnx-zynqmp.h | 18 +++++++++
>  2 files changed, 77 insertions(+)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index a966ee956573..807e404589f8 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -846,6 +846,65 @@ int zynqmp_pm_release_node(const u32 node)
>  }
>  EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
>  
> +/**
> + * zynqmp_pm_get_rpu_mode() - Get RPU mode
> + * @node_id:	Node ID of the device
> + * @rpu_mode:	return by reference value
> + *		either split or lockstep
> + *
> + * Return:	return 0 on success or error+reason.
> + *		if success, then  rpu_mode will be set
> + *		to current rpu mode.
> + */
> +int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode)
> +{
> +	u32 ret_payload[PAYLOAD_ARG_CNT];
> +	int ret;
> +
> +	ret = zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				  IOCTL_GET_RPU_OPER_MODE, 0, 0, ret_payload);
> +	if (ret < 0)
> +		(void)rpu_mode;

There seems to be something missing from this statement. What is
expected from "(void)rpu_mode" here.

> +	else
> +		*rpu_mode = ret_payload[0];
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode);
> +
> +/**
> + * zynqmp_pm_set_rpu_mode() - Set RPU mode
> + * @node_id:	Node ID of the device
> + * @arg1:	Argument 1 to requested IOCTL call. This is expeted to
> + *              to be value from enum rpu_oper_mode
> + *
> + * This function is used to set RPU mode to split or lockstep
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1)

If arg1 is expected to be "enum rpu_oper_mode" please have the function
argument reflect that and do any conversion needed inside the function.

> +{
> +	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				   IOCTL_SET_RPU_OPER_MODE, arg1, 0, NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode);
> +
> +/**
> + * zynqmp_pm_set_tcm_config - configure TCM
> + * @arg1:	Argument 1 to requested IOCTL call
> + *              either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT
> + *
> + * This function is used to set RPU mode to split or combined
> + *
> + * Return: status: 0 for success, else failure
> + */
> +int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1)

Same comment as above - with the appropriate enum ofcourse.

Thanks,
Punit

> +{
> +	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
> +				   IOCTL_TCM_COMB_CONFIG, arg1, 0, NULL);
> +}
> +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config);
> +
>  /**
>   * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
>   *             be powered down forcefully

[...]