[PATCH v5 57/80] drm/vc4: hdmi: Store the encoder type in the variant structure

[Maxime Ripard]

The vc4 CRTC will use the encoder type to control its output clock
muxing. However, this will be different from HDMI0 to HDMI1, so let's
store our type in the variant structure so that we can support multiple
controllers later on.

Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
Tested-by: Stefan Wahren <stefan.wahren at i2se.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 3 ++-
 drivers/gpu/drm/vc4/vc4_hdmi.h | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 9e2bc6cb690e..f6d18bdbd1bb 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1267,7 +1267,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 
 	dev_set_drvdata(dev, vc4_hdmi);
 	encoder = &vc4_hdmi->encoder.base.base;
-	vc4_hdmi->encoder.base.type = VC4_ENCODER_TYPE_HDMI0;
+	vc4_hdmi->encoder.base.type = variant->encoder_type;
 	vc4_hdmi->pdev = pdev;
 	vc4_hdmi->variant = variant;
 
@@ -1446,6 +1446,7 @@ static int vc4_hdmi_dev_remove(struct platform_device *pdev)
 }
 
 static const struct vc4_hdmi_variant bcm2835_variant = {
+	.encoder_type		= VC4_ENCODER_TYPE_HDMI0,
 	.registers		= vc4_hdmi_fields,
 	.num_registers		= ARRAY_SIZE(vc4_hdmi_fields),
 
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 0c32dc46d289..0d529db4b3ab 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -27,6 +27,9 @@ struct vc4_hdmi;
 struct vc4_hdmi_register;
 
 struct vc4_hdmi_variant {
+	/* Encoder Type for that controller */
+	enum vc4_encoder_type encoder_type;
+
 	/* List of the registers available on that variant */
 	const struct vc4_hdmi_register *registers;
 
-- 
git-series 0.9.1