[PATCH v5 17/80] drm/vc4: crtc: Rename HDMI encoder type to HDMI0

Maxime Ripard maxime at cerno.tech
Thu Sep 3 04:00:49 EDT 2020


The previous generations were only supporting a single HDMI controller, but
that's about to change, so put an index as well to differentiate between
the two controllers.

Reviewed-by: Eric Anholt <eric at anholt.net>
Tested-by: Chanwoo Choi <cw00.choi at samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
Tested-by: Stefan Wahren <stefan.wahren at i2se.com>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 2 +-
 drivers/gpu/drm/vc4/vc4_drv.h  | 2 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index 1d9e3658ae59..04744223460a 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -835,7 +835,7 @@ static const struct vc4_pv_data bcm2835_pv2_data = {
 	.fifo_depth = 64,
 	.pixels_per_clock = 1,
 	.encoder_types = {
-		[PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI,
+		[PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI] = VC4_ENCODER_TYPE_HDMI0,
 		[PV_CONTROL_CLK_SELECT_VEC] = VC4_ENCODER_TYPE_VEC,
 	},
 };
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index 179010b9a010..5781773aec4b 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -426,7 +426,7 @@ to_vc4_plane_state(struct drm_plane_state *state)
 
 enum vc4_encoder_type {
 	VC4_ENCODER_TYPE_NONE,
-	VC4_ENCODER_TYPE_HDMI,
+	VC4_ENCODER_TYPE_HDMI0,
 	VC4_ENCODER_TYPE_VEC,
 	VC4_ENCODER_TYPE_DSI0,
 	VC4_ENCODER_TYPE_DSI1,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 15a11cd4de25..ec34c08b16df 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1309,7 +1309,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 					GFP_KERNEL);
 	if (!vc4_hdmi_encoder)
 		return -ENOMEM;
-	vc4_hdmi_encoder->base.type = VC4_ENCODER_TYPE_HDMI;
+	vc4_hdmi_encoder->base.type = VC4_ENCODER_TYPE_HDMI0;
 	hdmi->encoder = &vc4_hdmi_encoder->base.base;
 
 	hdmi->pdev = pdev;
-- 
git-series 0.9.1



More information about the linux-arm-kernel mailing list