[PATCH 09/13] ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring

[Krzysztof Kozlowski]

Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:

  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc at 101e0000: clocks: [[2, 337]] is too short
  arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc at 101e0000: clock-names: ['rtc'] is too short

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm/boot/dts/exynos5250-spring.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index b6fcf847fc2f..166a0d287633 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -7,6 +7,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
@@ -141,7 +142,7 @@
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>;
 
-		clocks {
+		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
 			#clock-cells = <1>;
 			clock-output-names = "en32khz_ap",
@@ -522,6 +523,12 @@
 	};
 };
 
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sd1_bus4 {
 	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
-- 
2.17.1