[PATCH v4 3/5] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver
Marc Kleine-Budde
mkl at pengutronix.de
Thu Oct 29 13:27:33 EDT 2020
On 10/28/20 10:40 PM, Łukasz Stelmach wrote:
> ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
> connected to a CPU with a 8/16-bit bus or with an SPI. This driver
> supports SPI connection.
>
> The driver has been ported from the vendor kernel for ARTIK5[2]
> boards. Several changes were made to adapt it to the current kernel
> which include:
>
> + updated DT configuration,
> + clock configuration moved to DT,
> + new timer, ethtool and gpio APIs,
> + dev_* instead of pr_* and custom printk() wrappers,
> + removed awkward vendor power managemtn.
>
> [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65
> [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/
>
> The other ax88796 driver is for NE2000 compatible AX88796L chip. These
> chips are not compatible. Hence, two separate drivers are required.
>
> Signed-off-by: Łukasz Stelmach <l.stelmach at samsung.com>
> ---
> MAINTAINERS | 6 +
> drivers/net/ethernet/Kconfig | 1 +
> drivers/net/ethernet/Makefile | 1 +
> drivers/net/ethernet/asix/Kconfig | 22 +
> drivers/net/ethernet/asix/Makefile | 6 +
> drivers/net/ethernet/asix/ax88796c_ioctl.c | 197 ++++
> drivers/net/ethernet/asix/ax88796c_ioctl.h | 26 +
> drivers/net/ethernet/asix/ax88796c_main.c | 1144 ++++++++++++++++++++
> drivers/net/ethernet/asix/ax88796c_main.h | 578 ++++++++++
> drivers/net/ethernet/asix/ax88796c_spi.c | 111 ++
> drivers/net/ethernet/asix/ax88796c_spi.h | 69 ++
> 11 files changed, 2161 insertions(+)
> create mode 100644 drivers/net/ethernet/asix/Kconfig
> create mode 100644 drivers/net/ethernet/asix/Makefile
> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.c
> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.h
> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.c
> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.h
> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.c
> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.h
[...]
> +enum watchdog_state {
> + chk_link = 0,
> + chk_cable,
> + ax_nop,
> +};
> +
> +struct ax88796c_device {
> + struct resource *addr_res; /* resources found */
> + struct resource *addr_req; /* resources requested */
> + struct resource *irq_res;
> +
> + struct spi_device *spi;
> + struct net_device *ndev;
> + struct net_device_stats stats;
> +
> + struct timer_list watchdog;
> + enum watchdog_state w_state;
> + size_t w_ticks;
are these used?
> +
> + struct work_struct ax_work;
> +
> + struct mutex spi_lock; /* device access */
> +
> + struct sk_buff_head tx_wait_q;
> +
> + struct axspi_data ax_spi;
> +
> + struct mii_bus *mdiobus;
> + struct phy_device *phydev;
> +
> + int msg_enable;
> +
> + u16 seq_num;
> +
> + u8 multi_filter[AX_MCAST_FILTER_SIZE];
> +
> + int link;
> + int speed;
> + int duplex;
> + int pause;
> + int asym_pause;
> + int flowctrl;
> + #define AX_FC_NONE 0
> + #define AX_FC_RX BIT(0)
> + #define AX_FC_TX BIT(1)
> + #define AX_FC_ANEG BIT(2)
> +
> + unsigned long capabilities;
> + #define AX_CAP_DMA BIT(0)
> + #define AX_CAP_COMP BIT(1)
> + #define AX_CAP_BIDIR BIT(2)
> +
> + u8 plat_endian;
> + #define PLAT_LITTLE_ENDIAN 0
> + #define PLAT_BIG_ENDIAN 1
> +
> + unsigned long flags;
> + #define EVENT_INTR BIT(0)
> + #define EVENT_TX BIT(1)
> + #define EVENT_SET_MULTI BIT(2)
> +
> +};
> +
> +#define to_ax88796c_device(ndev) ((struct ax88796c_device *)netdev_priv(ndev))
> +
> +enum skb_state {
> + illegal = 0,
> + tx_done,
> + rx_done,
> + rx_err,
> +};
> +
> +struct skb_data {
> + enum skb_state state;
> + struct net_device *ndev;
> + struct sk_buff *skb;
> + size_t len;
> + dma_addr_t phy_addr;
unused?
[...]
> diff --git a/drivers/net/ethernet/asix/ax88796c_spi.c b/drivers/net/ethernet/asix/ax88796c_spi.c
> new file mode 100644
> index 000000000000..1a20bbeb4dc1
> --- /dev/null
> +++ b/drivers/net/ethernet/asix/ax88796c_spi.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2010 ASIX Electronics Corporation
> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
> + *
> + * ASIX AX88796C SPI Fast Ethernet Linux driver
> + */
> +
> +#define pr_fmt(fmt) "ax88796c: " fmt
> +
> +#include <linux/string.h>
> +#include <linux/spi/spi.h>
> +
> +#include "ax88796c_spi.h"
> +
> +/* driver bus management functions */
> +int axspi_wakeup(const struct axspi_data *ax_spi)
> +{
> + u8 tx_buf;
> + int ret;
> +
> + tx_buf = AX_SPICMD_EXIT_PWD; /* OP */
> + ret = spi_write(ax_spi->spi, &tx_buf, 1);
spi_write() needs a DMA safe buffer.
> + if (ret)
> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
> + return ret;
> +}
> +
> +int axspi_read_status(const struct axspi_data *ax_spi, struct spi_status *status)
> +{
> + u8 tx_buf;
> + int ret;
> +
> + /* OP */
> + tx_buf = AX_SPICMD_READ_STATUS;
> + ret = spi_write_then_read(ax_spi->spi, &tx_buf, 1, (u8 *)&status, 3);
> + if (ret)
> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
> + else
> + le16_to_cpus(&status->isr);
> +
> + return ret;
> +}
> +
> +int axspi_read_rxq(struct axspi_data *ax_spi, void *data, int len)
> +{
> + struct spi_transfer *xfer = ax_spi->spi_rx_xfer;
> + int ret;
> +
> + memcpy(ax_spi->cmd_buf, rx_cmd_buf, 5);
> +
> + xfer->tx_buf = ax_spi->cmd_buf;
> + xfer->rx_buf = NULL;
> + xfer->len = ax_spi->comp ? 2 : 5;
> + xfer->bits_per_word = 8;
> + spi_message_add_tail(xfer, &ax_spi->rx_msg);
> +
> + xfer++;
> + xfer->rx_buf = data;
> + xfer->tx_buf = NULL;
> + xfer->len = len;
> + xfer->bits_per_word = 8;
> + spi_message_add_tail(xfer, &ax_spi->rx_msg);
> + ret = spi_sync(ax_spi->spi, &ax_spi->rx_msg);
> + if (ret)
> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
> +
> + return ret;
> +}
> +
> +int axspi_write_txq(const struct axspi_data *ax_spi, void *data, int len)
> +{
> + return spi_write(ax_spi->spi, data, len);
> +}
> +
> +u16 axspi_read_reg(const struct axspi_data *ax_spi, u8 reg)
> +{
> + u8 tx_buf[4];
> + u16 rx_buf = 0;
> + int ret;
> + int len = ax_spi->comp ? 3 : 4;
> +
> + tx_buf[0] = 0x03; /* OP code read register */
> + tx_buf[1] = reg; /* register address */
> + tx_buf[2] = 0xFF; /* dumy cycle */
> + tx_buf[3] = 0xFF; /* dumy cycle */
> + ret = spi_write_then_read(ax_spi->spi, tx_buf, len, (u8 *)&rx_buf, 2);
> + if (ret)
> + dev_err(&ax_spi->spi->dev, "%s() failed: ret = %d\n", __func__, ret);
> + else
> + le16_to_cpus(&rx_buf);
> +
> + return rx_buf;
> +}
> +
> +int axspi_write_reg(const struct axspi_data *ax_spi, u8 reg, u16 value)
> +{
> + u8 tx_buf[4];
> + int ret;
> +
> + tx_buf[0] = AX_SPICMD_WRITE_REG; /* OP code read register */
> + tx_buf[1] = reg; /* register address */
> + tx_buf[2] = value;
> + tx_buf[3] = value >> 8;
> +
> + ret = spi_write(ax_spi->spi, tx_buf, 4);
I think you need DMA safe mem for spi_write().
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201029/13cf795a/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list