[RESEND PATCH v3] arm64: dts: mediatek: align GPIO hog names with dtschema

Matthias Brugger matthias.bgg at gmail.com
Thu Oct 29 11:52:34 EDT 2020



On 02/10/2020 18:39, Krzysztof Kozlowski wrote:
> The convention for node names is to use hyphens, not underscores.
> dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

Pushed to v5.10-next/dts64

Thanks!

> ---
>   .../boot/dts/mediatek/pumpkin-common.dtsi     | 26 +++++++++----------
>   1 file changed, 13 insertions(+), 13 deletions(-)
> 
> The dt-schema changes were applied.
> 
> diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> index 29d8cf6df46b..351a1905a074 100644
> --- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
> @@ -63,91 +63,91 @@
>   		gpio-controller;
>   		#gpio-cells = <2>;
>   
> -		eint20_mux_sel0 {
> +		eint20-mux-sel0-hog {
>   			gpio-hog;
>   			gpios = <0 0>;
>   			input;
>   			line-name = "eint20_mux_sel0";
>   		};
>   
> -		expcon_mux_sel1 {
> +		expcon-mux-sel1-hog {
>   			gpio-hog;
>   			gpios = <1 0>;
>   			input;
>   			line-name = "expcon_mux_sel1";
>   		};
>   
> -		mrg_di_mux_sel2 {
> +		mrg-di-mux-sel2-hog {
>   			gpio-hog;
>   			gpios = <2 0>;
>   			input;
>   			line-name = "mrg_di_mux_sel2";
>   		};
>   
> -		sd_sdio_mux_sel3 {
> +		sd-sdio-mux-sel3-hog {
>   			gpio-hog;
>   			gpios = <3 0>;
>   			input;
>   			line-name = "sd_sdio_mux_sel3";
>   		};
>   
> -		sd_sdio_mux_ctrl7 {
> +		sd-sdio-mux-ctrl7-hog {
>   			gpio-hog;
>   			gpios = <7 0>;
>   			output-low;
>   			line-name = "sd_sdio_mux_ctrl7";
>   		};
>   
> -		hw_id0 {
> +		hw-id0-hog {
>   			gpio-hog;
>   			gpios = <8 0>;
>   			input;
>   			line-name = "hw_id0";
>   		};
>   
> -		hw_id1 {
> +		hw-id1-hog {
>   			gpio-hog;
>   			gpios = <9 0>;
>   			input;
>   			line-name = "hw_id1";
>   		};
>   
> -		hw_id2 {
> +		hw-id2-hog {
>   			gpio-hog;
>   			gpios = <10 0>;
>   			input;
>   			line-name = "hw_id2";
>   		};
>   
> -		fg_int_n {
> +		fg-int-n-hog {
>   			gpio-hog;
>   			gpios = <11 0>;
>   			input;
>   			line-name = "fg_int_n";
>   		};
>   
> -		usba_pwr_en {
> +		usba-pwr-en-hog {
>   			gpio-hog;
>   			gpios = <12 0>;
>   			output-high;
>   			line-name = "usba_pwr_en";
>   		};
>   
> -		wifi_3v3_pg {
> +		wifi-3v3-pg-hog {
>   			gpio-hog;
>   			gpios = <13 0>;
>   			input;
>   			line-name = "wifi_3v3_pg";
>   		};
>   
> -		cam_rst {
> +		cam-rst-hog {
>   			gpio-hog;
>   			gpios = <14 0>;
>   			output-low;
>   			line-name = "cam_rst";
>   		};
>   
> -		cam_pwdn {
> +		cam-pwdn-hog {
>   			gpio-hog;
>   			gpios = <15 0>;
>   			output-low;
> 



More information about the linux-arm-kernel mailing list