[PATCH v2 12/12] arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2

[Krzysztof Kozlowski]

New nodes are enabled by default, so status=okay is not needed for them.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

---

Not actually tested on the HW, just checked the output DTB.
---
 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 01ab886fd3e9..97a2f0c7c0cf 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -92,7 +92,6 @@ i2c_max98504: i2c-gpio-0 {
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "okay";
 
 		max98504: amplifier at 31 {
 			compatible = "maxim,max98504";
-- 
2.25.1