[PATCH v2 01/12] ARM: dts: exynos: adjust node names to DT spec in Exynos3250 boards

[Krzysztof Kozlowski]

The Devicetree specification expects device node names to have a generic
name, representing the class of a device.  Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm/boot/dts/exynos3250-artik5.dtsi | 2 +-
 arch/arm/boot/dts/exynos3250-monk.dts    | 8 ++++----
 arch/arm/boot/dts/exynos3250-rinato.dts  | 8 ++++----
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 12887b3924af..04290ec4583a 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -76,7 +76,7 @@ &i2c_0 {
 	samsung,i2c-max-bus-freq = <100000>;
 	status = "okay";
 
-	s2mps14_pmic at 66 {
+	pmic at 66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
 		interrupts = <5 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index c1a68e612037..69451566945d 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -34,10 +34,10 @@ firmware at 205f000 {
 		reg = <0x0205F000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power_key {
+		power-key {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		max77836: subpmic at 25 {
+		max77836: pmic at 25 {
 			compatible = "maxim,max77836";
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 IRQ_TYPE_NONE>;
@@ -197,7 +197,7 @@ &i2c_0 {
 	samsung,i2c-max-bus-freq = <100000>;
 	status = "okay";
 
-	s2mps14_pmic at 66 {
+	pmic at 66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index b55afaaa691e..a26e3e582a7e 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -38,10 +38,10 @@ firmware at 205f000 {
 		reg = <0x0205F000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power_key {
+		power-key {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
@@ -62,7 +62,7 @@ i2c_max77836: i2c-gpio-0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		max77836: subpmic at 25 {
+		max77836: pmic at 25 {
 			compatible = "maxim,max77836";
 			interrupt-parent = <&gpx1>;
 			interrupts = <5 IRQ_TYPE_NONE>;
@@ -267,7 +267,7 @@ &i2c_0 {
 	samsung,i2c-max-bus-freq = <100000>;
 	status = "okay";
 
-	s2mps14_pmic at 66 {
+	pmic at 66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
 		interrupts = <7 IRQ_TYPE_NONE>;
-- 
2.25.1