[PATCH AUTOSEL 5.8 123/132] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

[Sasha Levin]

From: Krzysztof Kozlowski <krzk at kernel.org>

[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]

There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:

  amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
Tested-by: Jonathan Bakker <xc-racer2 at live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 1b0ee884e91db..84e4447931de5 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -128,35 +128,28 @@ wakeup-interrupt-controller {
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma at e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma at e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma at e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma at e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		adc: adc at e1700000 {
-- 
2.25.1