[PATCH v5] dt-bindings: power: rockchip: Convert to json-schema

Enric Balletbo i Serra enric.balletbo at collabora.com
Mon Oct 26 14:32:42 EDT 2020


Convert the soc/rockchip/power_domain.txt binding document to json-schema
and move to the power bindings directory.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Reviewed-by: Rob Herring <robh at kernel.org>
---

Changes in v5:
- Fix space warnings reported by bot.
- Add the Rob's Reviewed-by tag.
- Fix license.

Changes in v4:
- Use hex for unit-addresses.
- Use space between compatibles in the example.
- Define child nodes for nested power domains even are duplicated but
  more clear that adding a regex scaped to be a valid URI.

Changes in v3:
- Fixed tab errors found by bot

Changes in v2:
- Fixed a warning that says that 'syscon' should not be used alone.
- Use patternProperties to define a new level for power-domains.
- Add const values for power-domain-cells, address-cells, etc.

 .../power/rockchip,power-controller.yaml      | 283 ++++++++++++++++++
 .../bindings/soc/rockchip/power_domain.txt    | 136 ---------
 2 files changed, 283 insertions(+), 136 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt

diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
new file mode 100644
index 000000000000..61221df17082
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Power Domains
+
+maintainers:
+  - Caesar Wang <wxt at rock-chips.com>
+  - Heiko Stuebner <heiko at sntech.de>
+
+description: |
+  Rockchip processors include support for multiple power domains which can be
+  powered up/down by software based on different application scenes to save power.
+
+  Power domains contained within power-controller node are generic power domain
+  providers documented in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+  IP cores belonging to a power domain should contain a 'power-domains'
+  property that is a phandle for the power domain node representing the domain.
+
+properties:
+  $nodename:
+    const: power-controller
+
+  compatible:
+    enum:
+      - rockchip,px30-power-controller
+      - rockchip,rk3036-power-controller
+      - rockchip,rk3066-power-controller
+      - rockchip,rk3128-power-controller
+      - rockchip,rk3188-power-controller
+      - rockchip,rk3228-power-controller
+      - rockchip,rk3288-power-controller
+      - rockchip,rk3328-power-controller
+      - rockchip,rk3366-power-controller
+      - rockchip,rk3368-power-controller
+      - rockchip,rk3399-power-controller
+
+  '#power-domain-cells':
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^power-domain@[0-9a-f]+$":
+    type: object
+    description: |
+      Represents the power domains within the power controller node as documented
+      in Documentation/devicetree/bindings/power/power-domain.yaml.
+
+    properties:
+
+      '#power-domain-cells':
+        description:
+          Must be 0 for nodes representing a single PM domain and 1 for nodes
+          providing multiple PM domains.
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        description: |
+          Power domain index. Valid values are defined in:
+          "include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
+          "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
+          "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
+          "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
+          "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
+          "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
+          "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+          "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
+          "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
+          "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
+          "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
+        maxItems: 1
+
+      clocks:
+        description: |
+          A number of phandles to clocks that need to be enabled while power domain
+          switches state.
+
+      pm_qos:
+        description: |
+          A number of phandles to qos blocks which need to be saved and restored
+          while power domain switches state.
+
+    patternProperties:
+      "^power-domain@[0-9a-f]+$":
+        type: object
+        description: |
+          Represents a power domain child within a power domain parent node.
+
+        properties:
+
+          '#power-domain-cells':
+            description:
+              Must be 0 for nodes representing a single PM domain and 1 for nodes
+              providing multiple PM domains.
+
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          reg:
+            maxItems: 1
+
+          clocks:
+            description: |
+              A number of phandles to clocks that need to be enabled while power domain
+              switches state.
+
+          pm_qos:
+            description: |
+              A number of phandles to qos blocks which need to be saved and restored
+              while power domain switches state.
+
+        patternProperties:
+          "^power-domain@[0-9a-f]+$":
+            type: object
+            description: |
+              Represents a power domain child within a power domain parent node.
+
+            properties:
+
+              '#power-domain-cells':
+                description:
+                  Must be 0 for nodes representing a single PM domain and 1 for nodes
+                  providing multiple PM domains.
+
+              '#address-cells':
+                const: 1
+
+              '#size-cells':
+                const: 0
+
+              reg:
+                maxItems: 1
+
+              clocks:
+                description: |
+                  A number of phandles to clocks that need to be enabled while power domain
+                  switches state.
+
+              pm_qos:
+                description: |
+                  A number of phandles to qos blocks which need to be saved and restored
+                  while power domain switches state.
+
+            required:
+              - reg
+
+            additionalProperties: false
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/power/rk3399-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qos_hdcp: qos at ffa90000 {
+            compatible = "rockchip,rk3399-qos", "syscon";
+            reg = <0x0 0xffa90000 0x0 0x20>;
+        };
+
+        qos_iep: qos at ffa98000 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffa98000 0x0 0x20>;
+        };
+
+        qos_rga_r: qos at ffab0000 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffab0000 0x0 0x20>;
+        };
+
+        qos_rga_w: qos at ffab0080 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffab0080 0x0 0x20>;
+        };
+
+        qos_video_m0: qos at ffab8000 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffab8000 0x0 0x20>;
+        };
+
+        qos_video_m1_r: qos at ffac0000 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffac0000 0x0 0x20>;
+        };
+
+        qos_video_m1_w: qos at ffac0080 {
+            compatible = "rk3399-qos", "syscon";
+            reg = <0x0 0xffac0080 0x0 0x20>;
+        };
+
+        power-management at ff310000 {
+            compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+            reg = <0x0 0xff310000 0x0 0x1000>;
+
+            power-controller {
+                compatible = "rockchip,rk3399-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* These power domains are grouped by VD_CENTER */
+                power-domain at RK3399_PD_IEP {
+                    reg = <RK3399_PD_IEP>;
+                    clocks = <&cru ACLK_IEP>,
+                             <&cru HCLK_IEP>;
+                    pm_qos = <&qos_iep>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain at RK3399_PD_RGA {
+                    reg = <RK3399_PD_RGA>;
+                    clocks = <&cru ACLK_RGA>,
+                             <&cru HCLK_RGA>;
+                    pm_qos = <&qos_rga_r>,
+                             <&qos_rga_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain at RK3399_PD_VCODEC {
+                    reg = <RK3399_PD_VCODEC>;
+                    clocks = <&cru ACLK_VCODEC>,
+                             <&cru HCLK_VCODEC>;
+                    pm_qos = <&qos_video_m0>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain at RK3399_PD_VDU {
+                    reg = <RK3399_PD_VDU>;
+                    clocks = <&cru ACLK_VDU>,
+                             <&cru HCLK_VDU>;
+                    pm_qos = <&qos_video_m1_r>,
+                             <&qos_video_m1_w>;
+                    #power-domain-cells = <0>;
+                };
+                power-domain at RK3399_PD_VIO {
+                    reg = <RK3399_PD_VIO>;
+                    #power-domain-cells = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    power-domain at RK3399_PD_HDCP {
+                        reg = <RK3399_PD_HDCP>;
+                        clocks = <&cru ACLK_HDCP>,
+                                 <&cru HCLK_HDCP>,
+                                 <&cru PCLK_HDCP>;
+                        pm_qos = <&qos_hdcp>;
+                        #power-domain-cells = <0>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
deleted file mode 100644
index 8304eceb62e4..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
+++ /dev/null
@@ -1,136 +0,0 @@
-* Rockchip Power Domains
-
-Rockchip processors include support for multiple power domains which can be
-powered up/down by software based on different application scenes to save power.
-
-Required properties for power domain controller:
-- compatible: Should be one of the following.
-	"rockchip,px30-power-controller" - for PX30 SoCs.
-	"rockchip,rk3036-power-controller" - for RK3036 SoCs.
-	"rockchip,rk3066-power-controller" - for RK3066 SoCs.
-	"rockchip,rk3128-power-controller" - for RK3128 SoCs.
-	"rockchip,rk3188-power-controller" - for RK3188 SoCs.
-	"rockchip,rk3228-power-controller" - for RK3228 SoCs.
-	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
-	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
-	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
-	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
-	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
-- #power-domain-cells: Number of cells in a power-domain specifier.
-	Should be 1 for multiple PM domains.
-- #address-cells: Should be 1.
-- #size-cells: Should be 0.
-
-Required properties for power domain sub nodes:
-- reg: index of the power domain, should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
-	"include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
-	"include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
-	"include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
-- clocks (optional): phandles to clocks which need to be enabled while power domain
-	switches state.
-- pm_qos (optional): phandles to qos blocks which need to be saved and restored
-	while power domain switches state.
-
-Qos Example:
-
-	qos_gpu: qos_gpu at ffaf0000 {
-		compatible ="syscon";
-		reg = <0x0 0xffaf0000 0x0 0x20>;
-	};
-
-Example:
-
-	power: power-controller {
-		compatible = "rockchip,rk3288-power-controller";
-		#power-domain-cells = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pd_gpu {
-			reg = <RK3288_PD_GPU>;
-			clocks = <&cru ACLK_GPU>;
-			pm_qos = <&qos_gpu>;
-		};
-	};
-
-	 power: power-controller {
-                compatible = "rockchip,rk3368-power-controller";
-                #power-domain-cells = <1>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                pd_gpu_1 {
-                        reg = <RK3368_PD_GPU_1>;
-                        clocks = <&cru ACLK_GPU_CFG>;
-                };
-        };
-
-Example 2:
-		power: power-controller {
-			compatible = "rockchip,rk3399-power-controller";
-			#power-domain-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pd_vio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <RK3399_PD_VIO>;
-
-				pd_vo {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <RK3399_PD_VO>;
-
-					pd_vopb {
-						reg = <RK3399_PD_VOPB>;
-					};
-
-					pd_vopl {
-						reg = <RK3399_PD_VOPL>;
-					};
-				};
-			};
-		};
-
-Node of a device using power domains must have a power-domains property,
-containing a phandle to the power device node and an index specifying which
-power domain to use.
-The index should use macros in:
-	"include/dt-bindings/power/px30-power.h" - for px30 type power domain.
-	"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
-	"include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
-	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
-	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
-	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
-	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
-	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
-
-Example of the node using power domain:
-
-	node {
-		/* ... */
-		power-domains = <&power RK3288_PD_GPU>;
-		/* ... */
-	};
-
-	node {
-                /* ... */
-                power-domains = <&power RK3368_PD_GPU_1>;
-                /* ... */
-        };
-
-	node {
-		/* ... */
-		power-domains = <&power RK3399_PD_VOPB>;
-		/* ... */
-	};
-- 
2.28.0




More information about the linux-arm-kernel mailing list