[PATCH 05/12] ARM: dts: exynos: remove redundant status=okay in Exynos4412 boards

[Krzysztof Kozlowski]

New nodes are enabled by default, so status=okay is not needed for them.

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>

---

Not actually tested on the HW, just checked the output DTB.
---
 arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 1 -
 arch/arm/boot/dts/exynos4412-midas.dtsi     | 3 ---
 2 files changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index db91678f5648..64274b803aef 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -58,7 +58,6 @@ i2c_ak8975: i2c-gpio-0 {
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "okay";
 
 		magnetometer at c {
 			compatible = "asahi-kasei,ak8975";
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 52a4f6e6c7f2..72f8d8040f77 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -169,7 +169,6 @@ i2c_max77693: i2c-gpio-1 {
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "okay";
 
 		max77693 at 66 {
 			compatible = "maxim,max77693";
@@ -218,7 +217,6 @@ i2c_max77693_fuel: i2c-gpio-3 {
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "okay";
 
 		fuel-gauge at 36 {
 			compatible = "maxim,max17047";
@@ -262,7 +260,6 @@ i2c-mhl {
 
 		pinctrl-0 = <&i2c_mhl_bus>;
 		pinctrl-names = "default";
-		status = "okay";
 
 		sii9234: hdmi-bridge at 39 {
 			compatible = "sil,sii9234";
-- 
2.25.1