[RFC 0/3] clk: imx: Implement blk-ctl driver for i.MX8MN

[Marek Vasut]

On 10/25/20 1:05 PM, Abel Vesa wrote:

[...]

>> Together, both the GPC and the clk-blk driver should be able to pull
>> the multimedia block out of reset.  Currently, the GPC can handle the
>> USB OTG and the GPU, but the LCDIF and MIPI DSI appear to be gated by
>> the clock block
>>
>> My original patch RFC didn't include the imx8mn node, because it
>> hangs, but the node I added looks like:
>>
>> media_blk_ctl: clock-controller at 32e28000 {
>>      compatible = "fsl,imx8mn-media-blk-ctl", "syscon";
>>      reg = <0x32e28000 0x1000>;
>>      #clock-cells = <1>;
>>      #reset-cells = <1>;
>> };
>>
>> I was hoping you might have some feedback on the 8mn clk-blk driver
>> since you did the 8mp clk-blk drive and they appear to be very
>> similar.
>>
> 
> I'll do you one better still. I'll apply the patch in my tree and give it
> a test tomorrow morning.

You can also apply the one for 8MM:
https://lore.kernel.org/linux-arm-kernel/20201003224555.163780-5-marex@denx.de/