[PATCH v2] arm: dts: imx6qdl-udoo: fix rgmii phy-mode for ksz9031 phy

[Fabio Estevam]

Hi Sergey,

On Tue, Oct 20, 2020 at 4:28 PM Sergey Matyukevich <geomatsi at gmail.com> wrote:
>
> Commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the
> KSZ9031 PHY") fixed micrel phy driver adding proper support for phy
> modes. Adapt imx6q-udoo board phy settings accordingly: explicitly
> set required delay configuration using "rgmii-id".
>
> Fixes: bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")

This commit exposed the issue, but the Fixes tag should be the commit
that introduced Ethernet support on udoo board.

This is similar to the fix in 0672d22a1924 ("ARM: dts: imx: Fix the
AR803X phy-mode").