[PATCH v1 6/6] i2c: iproc: handle rx fifo full interrupt

[Ray Jui]

On 10/12/2020 3:03 PM, Dhananjay Phadke wrote:
> From: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
> 
> On Sun, 11 Oct 2020 23:52:54 +0530, Rayagonda Kokatanur wrote:
>> Add code to handle IS_S_RX_FIFO_FULL_SHIFT interrupt to support
>> master write request with >= 64 bytes.
>>
>> Iproc has a slave rx fifo size of 64 bytes.
>> Rx fifo full interrupt (IS_S_RX_FIFO_FULL_SHIFT) will be generated
>> when RX fifo becomes full. This can happen if master issues write
>> request of more than 64 bytes.
>>
> 
> ARM cores run much faster than I2C bus, why would rx fifo go full when
> rx interrupt is enabled and bytes are read out by bus driver isr?
> Isn't fifo read pointer updated on these byte reads?

Hi Rayagonda,

Could you please reply on this question? For transactions > 64 bytes, do
we batch until RX FIFO is full before we read out the data?

Thanks,

Ray

> Does controller stretch clock when rx fifo is full (e.g. kernel has
> crashed, bus driver isn't draining fifo)?
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4151 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201023/89f2b1be/attachment.p7s>