[PATCH v2 2/5] dt-bindings: display: mediatek: dsi: add documentation for MT8167 SoC

[Chun-Kuang Hu]

Hi, Fabien:

Fabien Parent <fparent at baylibre.com> 於 2020年10月23日 週五 下午9:31寫道：
>
> Add binding documentation for the MT8167 SoC.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>

In [1], Mediatek DPI binding document has been changed to yaml format,
would you please also change this document to yaml? Ditto for
mediatek,disp.txt.

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20200917073305.25738-1-jitao.shi@mediatek.com/

Regards,
Chun-Kuang.


>
> Signed-off-by: Fabien Parent <fparent at baylibre.com>
> ---
>
> Changelog:
>
> V2: removed part that added a new clock
>
>  .../devicetree/bindings/display/mediatek/mediatek,dsi.txt     | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> index f06f24d405a5..6a10de812158 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
> @@ -7,7 +7,7 @@ channel output.
>
>  Required properties:
>  - compatible: "mediatek,<chip>-dsi"
> -- the supported chips are mt2701, mt7623, mt8173 and mt8183.
> +- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
>  - reg: Physical base address and length of the controller's registers
>  - interrupts: The interrupt signal from the function block.
>  - clocks: device clocks
> @@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
>
>  Required properties:
>  - compatible: "mediatek,<chip>-mipi-tx"
> -- the supported chips are mt2701, 7623, mt8173 and mt8183.
> +- the supported chips are mt2701, 7623, mt8167, mt8173 and mt8183.
>  - reg: Physical base address and length of the controller's registers
>  - clocks: PLL reference clock
>  - clock-output-names: name of the output clock line to the DSI encoder
> --
> 2.28.0
>