[PATCH 4/4] arm64: dts: imx8mn: Add power-domain reference in USB controller

[Krzysztof Kozlowski]

On Fri, Oct 23, 2020 at 06:03:32AM -0500, Adam Ford wrote:
> On Fri, Oct 23, 2020 at 4:55 AM Krzysztof Kozlowski <krzk at kernel.org> wrote:
> >
> > On Thu, Oct 22, 2020 at 10:08:07AM -0500, Adam Ford wrote:
> > > The USB OTG controller cannot be used until the power-domain is enabled
> > > unless it was started in the bootloader.
> > >
> > > Adding the power-domain reference to the OTG node allows the OTG
> > > controller to operate.
> > >
> > > Signed-off-by: Adam Ford <aford173 at gmail.com>
> > >
> >
> > I wonder, why your patches do not have usual Git trailer with summary of
> > changes (after '---')?
> 
> I historically have just done 'git format-patch -pX'  but I haven't
> seen complaints that the summary was missing.  I can add them going
> forward.  Most of these individual patches have only touched single
> files or created new files all together.

The patch stat is useful, especially if it touches multiple
files/subsystems. However it's not needed, so I was just wondering :)

> 
> >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > index 27733fbe87e9..605e6dbd2c6f 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> > > @@ -979,6 +979,7 @@ usbotg1: usb at 32e40000 {
> > >                               assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
> > >                               fsl,usbphy = <&usbphynop1>;
> > >                               fsl,usbmisc = <&usbmisc1 0>;
> > > +                             power-domains = <&pgc_otg1>;
> >
> > I guess you need it also for the usbphynop1 and usbmisc1.
> 
> From what I can see looking at the IP blocks and the vendor's code
> repo, only the usbotg IP block needs the power-domain to enable the
> clocking going to it.  AFAICT, neither the usbphynop nor the usbmisc
> are using clocks gated by the power-domain.
> Thanks again for all your reviews.

Mhm, ok then.  Thanks for checking.

Best regards,
Krzysztof