[PATCH 3/4] arm64: dts: imx8mn: add GPC node and power domains

Krzysztof Kozlowski krzk at kernel.org
Fri Oct 23 05:52:27 EDT 2020


On Thu, Oct 22, 2020 at 10:08:06AM -0500, Adam Ford wrote:
> This adds the DT nodes to describe the power domains available on the
> i.MX8MN. There are four power domains, but the displaymix and mipi
> power domains need a separate clock block controller which is also
> pending for 8MP and 8MM. Once the path for those is clear, Nano will
> need something similar, but the registers for Nano differ.  For now,
> the dispmix and mipi are placeholders.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 9b4baf7bdfb1..27733fbe87e9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -596,6 +596,55 @@ src: reset-controller at 30390000 {
>  				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>  				#reset-cells = <1>;
>  			};
> +
> +			gpc: gpc at 303a0000 {
> +				compatible = "fsl,imx8mn-gpc";
> +				reg = <0x303a0000 0x10000>;
> +				interrupt-parent = <&gic>;
> +				interrupt-controller;
> +				#interrupt-cells = <3>;

Missing interrupts.

> +
> +				pgc {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					pgc_hsiomix: power-domain at 0 {
> +						#power-domain-cells = <0>;
> +						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
> +						clocks = <&clk IMX8MN_CLK_USB_BUS>;
> +					};
> +
> +					pgc_otg1: power-domain at 1 {
> +						#power-domain-cells = <0>;
> +						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
> +						power-domains = <&pgc_hsiomix>;
> +					};
> +
> +					pgc_gpumix: power-domain at 2 {
> +						#power-domain-cells = <0>;
> +						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
> +						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
> +							 <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
> +							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
> +							 <&clk IMX8MN_CLK_GPU_AHB>;
> +						resets = <&src IMX8MQ_RESET_GPU_RESET>;

Does it compile without include? Did the include come via dependencies
of this patch?

Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list