[PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7

[Vivek Unune]

On Wed, Oct 14, 2020 at 03:27:27PM -0400, Vivek Unune wrote:
> Add ports 5 and 7 which are connected to gmac cores 1 & 2.
> These will be disabled for now.
> 
> Signed-off-by: Vivek Unune <npcomplete13 at gmail.com>
> ---
>  .../boot/dts/bcm47094-linksys-panamera.dts    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> index 9fcd215177d7..0ff502d5aa0c 100644
> --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
> @@ -242,6 +242,30 @@ port at 4 {
>  			label = "wan";
>  		};
>  
> +		port at 5 {
> +			reg = <5>;
> +			ethernet = <&gmac0>;
> +			label = "cpu";
> +			status = "disabled";
> +
> +			fixed-link {
> +				speed = <1000>;
> +				full-duplex;
> +			};
> +		};
> +
> +		port at 7 {
> +			reg = <7>;
> +			ethernet = <&gmac1>;
> +			label = "cpu";
> +			status = "disabled";
> +
> +			fixed-link {
> +				speed = <1000>;
> +				full-duplex;
> +			};
> +		};
> +
>  		port at 8 {
>  			reg = <8>;
>  			ethernet = <&gmac2>;
> -- 
> 2.25.1
>

Any feedback? 

Thanks!

Vivek