[PATCH] ARM: dts: stm32: update sdmmc IP version for STM32MP157 SOC

[Ahmad Fatoum]

From: Yann Gautier <yann.gautier at st.com>

Update the IP version to v2.0, which supports linked lists in internal DMA,
and is present in STM32MP1 SoCs.

The mmci driver supports the v2.0 periph id since 7a2a98be672b ("mmc: mmci:
Add support for sdmmc variant revision 2.0"), so it's now Ok to add it into
the SoC device tree to benefit from the improved DMA support.

Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
Signed-off-by: Yann Gautier <yann.gautier at st.com>
[afa: cherry-picked from https://github.com/STMicroelectronics/linux/commit/31e2a6bc8]
[afa: extended commit message with reference to driver patch]
Signed-off-by: Ahmad Fatoum <a.fatoum at pengutronix.de>
---
Cc: Ludovic Barre <ludovic.barre at st.com>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index bfe29023fbd5..b8d996d32dc0 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1040,7 +1040,7 @@ adc2: adc at 100 {
 
 		sdmmc3: sdmmc at 48004000 {
 			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x10153180>;
+			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
@@ -1338,7 +1338,7 @@ qspi: spi at 58003000 {
 
 		sdmmc1: sdmmc at 58005000 {
 			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x10153180>;
+			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
@@ -1353,7 +1353,7 @@ sdmmc1: sdmmc at 58005000 {
 
 		sdmmc2: sdmmc at 58007000 {
 			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x10153180>;
+			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
-- 
2.28.0