[PATCH 25/29] arm64: dts: apm: Harmonize DWC USB3 DT nodes name

Serge Semin Sergey.Semin at baikalelectronics.ru
Tue Oct 20 07:59:55 EDT 2020


In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named despite of the warning comment about possible backward
compatibility issues.

Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 4 ++--
 arch/arm64/boot/dts/apm/apm-storm.dtsi     | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 3feb1881bbc2..a0a194b8db7a 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -597,8 +597,8 @@ serial0: serial at 10600000 {
 			interrupts = <0x0 0x4c 0x4>;
 		};
 
-		/* Do not change dwusb name, coded for backward compatibility */
-		usb0: dwusb at 19000000 {
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb at 19000000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19000000 0x0 0x100000>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 8c802d87e751..f5083b3b9579 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -923,8 +923,8 @@ sata3: sata at 1a800000 {
 			phy-names = "sata-phy";
 		};
 
-		/* Do not change dwusb name, coded for backward compatibility */
-		usb0: dwusb at 19000000 {
+		/* Node-name might need to be coded as dwusb for backward compatibility */
+		usb0: usb at 19000000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19000000 0x0 0x100000>;
@@ -933,7 +933,7 @@ usb0: dwusb at 19000000 {
 			dr_mode = "host";
 		};
 
-		usb1: dwusb at 19800000 {
+		usb1: usb at 19800000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg =  <0x0 0x19800000 0x0 0x100000>;
-- 
2.27.0




More information about the linux-arm-kernel mailing list