[PATCH 27/29] arm64: dts: layerscape: Harmonize DWC USB3 DT nodes name

[Serge Semin]

In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 6 +++---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 4 ++--
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 4 ++--
 4 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index ff19ec415b60..06dac6be67e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -453,7 +453,7 @@ edma0: edma at 2c00000 {
 				 <&clockgen 4 3>;
 		};
 
-		usb0: usb3 at 2f00000 {
+		usb0: usb at 2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
 			interrupts = <0 60 0x4>;
@@ -474,7 +474,7 @@ sata: sata at 3200000 {
 			status = "disabled";
 		};
 
-		usb1: usb2 at 8600000 {
+		usb1: usb at 8600000 {
 			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			reg = <0x0 0x8600000 0x0 0x1000>;
 			interrupts = <0 139 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 5c2e370f6316..1f45fa32e57b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -750,7 +750,7 @@ edma0: edma at 2c00000 {
 				 <&clockgen 4 0>;
 		};
 
-		usb0: usb3 at 2f00000 {
+		usb0: usb at 2f00000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x2f00000 0x0 0x10000>;
 			interrupts = <0 60 0x4>;
@@ -761,7 +761,7 @@ usb0: usb3 at 2f00000 {
 			status = "disabled";
 		};
 
-		usb1: usb3 at 3000000 {
+		usb1: usb at 3000000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3000000 0x0 0x10000>;
 			interrupts = <0 61 0x4>;
@@ -772,7 +772,7 @@ usb1: usb3 at 3000000 {
 			status = "disabled";
 		};
 
-		usb2: usb3 at 3100000 {
+		usb2: usb at 3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 63 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 169f4742ae3b..96723b53a4e9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -402,7 +402,7 @@ esdhc: esdhc at 2140000 {
 			status = "disabled";
 		};
 
-		usb0: usb3 at 3100000 {
+		usb0: usb at 3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
 			interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
@@ -413,7 +413,7 @@ usb0: usb3 at 3100000 {
 			status = "disabled";
 		};
 
-		usb1: usb3 at 3110000 {
+		usb1: usb at 3110000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
 			interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 41102dacc2e1..d356ec2beee3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -737,7 +737,7 @@ sata1: sata at 3210000 {
 			dma-coherent;
 		};
 
-		usb0: usb3 at 3100000 {
+		usb0: usb at 3100000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
@@ -748,7 +748,7 @@ usb0: usb3 at 3100000 {
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 		};
 
-		usb1: usb3 at 3110000 {
+		usb1: usb at 3110000 {
 			status = "disabled";
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3110000 0x0 0x10000>;
-- 
2.27.0