[PATCH v3 2/2] arm64: dts: lx2160a: add device tree for lx2162aqds board
Meenakshi Aggarwal
meenakshi.aggarwal at nxp.com
Mon Oct 19 05:00:33 EDT 2020
Hi,
Any further comments?
Thanks,
Meenakshi
> -----Original Message-----
> From: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> Sent: Tuesday, September 29, 2020 3:33 PM
> To: shawnguo at kernel.org; robh+dt at kernel.org; Varun Sethi
> <V.Sethi at nxp.com>; Leo Li <leoyang.li at nxp.com>; linux-arm-
> kernel at lists.infradead.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org
> Cc: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Ioana Ciornei
> <ioana.ciornei at nxp.com>; Kuldeep Singh <kuldeep.singh at nxp.com>
> Subject: [PATCH v3 2/2] arm64: dts: lx2160a: add device tree for lx2162aqds
> board
>
> From: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
>
> Add device tree support for LX2162AQDS board.
> LX2162A has same die as of LX2160A with different packaging.
>
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 334
> ++++++++++++++++++++++
> 2 files changed, 335 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 903c0eb..0edc8ab 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-
> clearfog-cx.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
>
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb diff --git
> a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
> new file mode 100644
> index 0000000..b29174e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
> @@ -0,0 +1,334 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT) // // Device Tree file for
> +LX2162AQDS // // Copyright 2020 NXP
> +
> +/dts-v1/;
> +
> +#include "fsl-lx2160a.dtsi"
> +
> +/ {
> + model = "NXP Layerscape LX2162AQDS";
> + compatible = "nxp,lx2162a-qds", "fsl,lx2160a";
> +
> + aliases {
> + crypto = &crypto;
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + sb_3v3: regulator-sb3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "LTM4619-3.3VSB";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + mdio-mux-1 {
> + compatible = "mdio-mux-multiplexer";
> + mux-controls = <&mux 0>;
> + mdio-parent-bus = <&emdio1>;
> + #address-cells=<1>;
> + #size-cells = <0>;
> +
> + mdio at 0 { /* On-board RTL8211F PHY #1 RGMII1 */
> + reg = <0x00>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rgmii_phy1: ethernet-phy at 1 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x1>;
> + eee-broken-1000t;
> + };
> + };
> +
> + mdio at 8 { /* On-board RTL8211F PHY #2 RGMII2 */
> + reg = <0x8>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rgmii_phy2: ethernet-phy at 2 {
> + compatible = "ethernet-phy-id001c.c916";
> + reg = <0x2>;
> + eee-broken-1000t;
> + };
> + };
> +
> + mdio at 18 { /* Slot #1 */
> + reg = <0x18>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 19 { /* Slot #2 */
> + reg = <0x19>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1a { /* Slot #3 */
> + reg = <0x1a>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1b { /* Slot #4 */
> + reg = <0x1b>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1c { /* Slot #5 */
> + reg = <0x1c>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1d { /* Slot #6 */
> + reg = <0x1d>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1e { /* Slot #7 */
> + reg = <0x1e>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1f { /* Slot #8 */
> + reg = <0x1f>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + mdio-mux-2 {
> + compatible = "mdio-mux-multiplexer";
> + mux-controls = <&mux 1>;
> + mdio-parent-bus = <&emdio2>;
> + #address-cells=<1>;
> + #size-cells = <0>;
> +
> + mdio at 0 { /* Slot #1 (secondary EMI) */
> + reg = <0x00>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 1 { /* Slot #2 (secondary EMI) */
> + reg = <0x01>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 2 { /* Slot #3 (secondary EMI) */
> + reg = <0x02>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 3 { /* Slot #4 (secondary EMI) */
> + reg = <0x03>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 4 { /* Slot #5 (secondary EMI) */
> + reg = <0x04>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 5 { /* Slot #6 (secondary EMI) */
> + reg = <0x05>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 6 { /* Slot #7 (secondary EMI) */
> + reg = <0x06>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + mdio at 7 { /* Slot #8 (secondary EMI) */
> + reg = <0x07>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&crypto {
> + status = "okay";
> +};
> +
> +&dpmac17 {
> + phy-handle = <&rgmii_phy1>;
> + phy-connection-type = "rgmii-id";
> +};
> +
> +&dpmac18 {
> + phy-handle = <&rgmii_phy2>;
> + phy-connection-type = "rgmii-id";
> +};
> +
> +&dspi0 {
> + status = "okay";
> +
> + dflash0: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + };
> +};
> +
> +&dspi1 {
> + status = "okay";
> +
> + dflash1: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + };
> +};
> +
> +&dspi2 {
> + status = "okay";
> +
> + dflash2: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + };
> +};
> +
> +&emdio1 {
> + status = "okay";
> +};
> +
> +&emdio2 {
> + status = "okay";
> +};
> +
> +&esdhc0 {
> + status = "okay";
> +};
> +
> +&esdhc1 {
> + status = "okay";
> +};
> +
> +&fspi {
> + status = "okay";
> +
> + mt35xu512aba0: flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + m25p,fast-read;
> + spi-max-frequency = <50000000>;
> + reg = <0>;
> + spi-rx-bus-width = <8>;
> + spi-tx-bus-width = <8>;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + fpga at 66 {
> + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c",
> + "simple-mfd";
> + reg = <0x66>;
> +
> + mux: mux-controller {
> + compatible = "reg-mux";
> + #mux-control-cells = <1>;
> + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3
> */
> + <0x54 0x07>; /* 1: reg 0x54, bit 2:0 */
> + };
> + };
> +
> + i2c-mux at 77 {
> + compatible = "nxp,pca9547";
> + reg = <0x77>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c at 2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + power-monitor at 40 {
> + compatible = "ti,ina220";
> + reg = <0x40>;
> + shunt-resistor = <500>;
> + };
> +
> + power-monitor at 41 {
> + compatible = "ti,ina220";
> + reg = <0x41>;
> + shunt-resistor = <1000>;
> + };
> + };
> +
> + i2c at 3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + temperature-sensor at 4c {
> + compatible = "nxp,sa56004";
> + reg = <0x4c>;
> + vcc-supply = <&sb_3v3>;
> + };
> +
> + rtc at 51 {
> + compatible = "nxp,pcf2129";
> + reg = <0x51>;
> + };
> + };
> + };
> +};
> +
> +&sata0 {
> + status = "okay";
> +};
> +
> +&sata1 {
> + status = "okay";
> +};
> +
> +&sata2 {
> + status = "okay";
> +};
> +
> +&sata3 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> --
> 2.7.4
More information about the linux-arm-kernel
mailing list