[PATCH] gpio: aspeed: fix ast2600 bank properties

[Billy Tsai]

GPIO_T is mapped to the most significant byte of input/output mask, and
the byte in "output" mask should be 0 because GPIO_T is input only. All
the other bits need to be 1 because GPIO_Q/R/S support both input and
output modes.

Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
---
 drivers/gpio/gpio-aspeed.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index d07bf2c3f136..f24754b3f6d1 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1114,6 +1114,7 @@ static const struct aspeed_gpio_config ast2500_config =
 
 static const struct aspeed_bank_props ast2600_bank_props[] = {
 	/*     input	  output   */
+	{4, 0xffffffff,  0x00ffffff}, /* Q/R/S/T */
 	{5, 0xffffffff,  0xffffff00}, /* U/V/W/X */
 	{6, 0x0000ffff,  0x0000ffff}, /* Y/Z */
 	{ },
-- 
2.17.1