[PATCH] firmware: arm_scmi: Fix duplicate workqueue name
Sudeep Holla
sudeep.holla at arm.com
Wed Oct 14 05:18:06 EDT 2020
Hi Florian,
Thanks for the patch, it shows someone else is also using this and
testing 😉.
On Tue, Oct 13, 2020 at 07:17:37PM -0700, Florian Fainelli wrote:
> When more than a single SCMI device are present in the system, the
> creation of the notification workqueue with the WQ_SYSFS flag will lead
> to the following sysfs duplicate node warning:
>
Please trim the calltrace next time without timestamp and register raw
hex values.
You using this on 32-bit platform ? If so, thanks for additional test
coverage.
> [ 9.259990] sysfs: cannot create duplicate filename '/devices/virtual/workqueue/scmi_notify'
> [ 9.260024] CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 5.9.0-gdf4dd84a3f7d #29
> [ 9.260045] Hardware name: Broadcom STB (Flattened Device Tree)
> [ 9.260083] Workqueue: events deferred_probe_work_func
> [ 9.260099] Backtrace:
> [ 9.260127] [<c02120b4>] (dump_backtrace) from [<c02123d8>] (show_stack+0x20/0x24)
> [ 9.260155] r9:ffffffff r8:00000000 r7:c298e3c0 r6:60000013 r5:00000000 r4:c298e3c0
> [ 9.260186] [<c02123b8>] (show_stack) from [<c08852a0>] (dump_stack+0xbc/0xe0)
> [ 9.260216] [<c08851e4>] (dump_stack) from [<c054442c>] (sysfs_warn_dup+0x70/0x80)
> [ 9.260243] r10:e472d814 r9:ffffffef r8:e4614a50 r7:c2806d48 r6:e0e50f80 r5:e4614a50
> [ 9.260265] r4:e0e82000 r3:c5b17c34
> [ 9.260285] [<c05443bc>] (sysfs_warn_dup) from [<c05445fc>] (sysfs_create_dir_ns+0x15c/0x1a4)
> [ 9.260310] r7:c2806d48 r6:ffffffef r5:e0dff008 r4:bb8cd6e4
> [ 9.260335] [<c05444a0>] (sysfs_create_dir_ns) from [<c088ebac>] (kobject_add_internal+0x140/0x4d0)
> [ 9.260363] r9:e451fa80 r8:e0dff01c r7:e0dff014 r6:e45b1400 r5:e0dff018 r4:e0dff008
> [ 9.260390] [<c088ea6c>] (kobject_add_internal) from [<c088f004>] (kobject_add+0xc8/0x138)
> [ 9.260416] r10:e0dff030 r9:00000000 r8:e45b1400 r7:00000000 r6:c2806d48 r5:e0dff008
> [ 9.260436] r4:bb8cd708
> [ 9.260455] [<c088ef3c>] (kobject_add) from [<c0a0bc70>] (device_add+0x1dc/0xc20)
> [ 9.260476] r3:e0dff014 r2:00000000
> [ 9.260495] r9:00000000 r8:e466b980 r7:e45b1400 r6:c2806d48 r5:bb8cd724 r4:e0dff008
> [ 9.260521] [<c0a0ba94>] (device_add) from [<c0a0c6d8>] (device_register+0x24/0x28)
> [ 9.260547] r10:c2831340 r9:e0dfec08 r8:e0dff028 r7:e0dfecc0 r6:e0dfec00 r5:e0dff008
> [ 9.260567] r4:e0dff008
> [ 9.260586] [<c0a0c6b4>] (device_register) from [<c025f2a8>] (workqueue_sysfs_register+0xe4/0x1f0)
> [ 9.260609] r5:e0dff008 r4:e0dff000
> [ 9.260627] [<c025f1c4>] (workqueue_sysfs_register) from [<c025f7fc>] (alloc_workqueue+0x448/0x6ac)
> [ 9.260655] r10:e0dfecc0 r9:e0dfec08 r8:e0dfec0c r7:e0dfec04 r6:e0dfecc0 r5:e0dfec00
> [ 9.260675] r4:00000001
> [ 9.260698] [<c025f3b4>] (alloc_workqueue) from [<c0d8b58c>] (scmi_notification_init+0x78/0x1dc)
> [ 9.260720] r3:c0a1b488 r2:00000000
> [ 9.260739] r10:e0de1040 r9:00800004 r8:e0de10d8 r7:e0de10f4 r6:e0de1074 r5:e0e54740
> [ 9.260759] r4:e0e50d00
> [ 9.260778] [<c0d8b514>] (scmi_notification_init) from [<c0d87c00>] (scmi_probe+0x268/0x4fc)
> [ 9.260805] r9:00800004 r8:e0de10d8 r7:e0de10f4 r6:e0de1074 r5:e0de10f0 r4:e472d810
> [ 9.260833] [<c0d87998>] (scmi_probe) from [<c0a17d74>] (platform_drv_probe+0x70/0xc8)
> [ 9.260859] r10:e472d844 r9:c2ab02b4 r8:c2b5e298 r7:00000000 r6:c2ab02b4 r5:00000000
> [ 9.260879] r4:e472d810
> [ 9.260898] [<c0a17d04>] (platform_drv_probe) from [<c0a13e80>] (really_probe+0x184/0x728)
> [ 9.260922] r7:00000000 r6:c2fc82a0 r5:c2fc8220 r4:e472d810
> [ 9.260946] [<c0a13cfc>] (really_probe) from [<c0a146b4>] (driver_probe_device+0xa4/0x278)
> [ 9.260973] r10:e0cef438 r9:c0a14a04 r8:c2b771c0 r7:c2b5e298 r6:c2ab02b4 r5:e472d834
> [ 9.260993] r4:e472d810
> [ 9.261014] [<c0a14610>] (driver_probe_device) from [<c0a14aec>] (__device_attach_driver+0xe8/0x148)
> [ 9.261042] r10:e0cef438 r9:c0a14a04 r8:e466bdc0 r7:e472d810 r6:00000000 r5:c2ab02b4
> [ 9.261062] r4:e466bdc0
> [ 9.261082] [<c0a14a04>] (__device_attach_driver) from [<c0a10f6c>] (bus_for_each_drv+0x108/0x158)
> [ 9.261107] r7:c2806d48 r6:00000000 r5:bb8cd79c r4:e466bd00
> [ 9.261131] [<c0a10e64>] (bus_for_each_drv) from [<c0a13c38>] (__device_attach+0x190/0x234)
> [ 9.261158] r10:e46fde00 r9:e472d848 r8:e472d854 r7:e466be00 r6:c2806d48 r5:bb8cd7b4
> [ 9.261178] r4:e472d810
> [ 9.261199] [<c0a13aa8>] (__device_attach) from [<c0a14b68>] (device_initial_probe+0x1c/0x20)
> [ 9.261226] r10:e46fde54 r9:c29d6380 r8:c29d7910 r7:e472d810 r6:c29d78c0 r5:c29d6340
> [ 9.261246] r4:e44efe00
> [ 9.261266] [<c0a14b4c>] (device_initial_probe) from [<c0a125fc>] (bus_probe_device+0xdc/0xec)
> [ 9.261296] [<c0a12520>] (bus_probe_device) from [<c0a12e24>] (deferred_probe_work_func+0xd4/0x11c)
> [ 9.261324] r9:c29d6380 r8:e4672e54 r7:c29d6380 r6:c29d6340 r5:c29d6340 r4:e472d810
> [ 9.261356] [<c0a12d50>] (deferred_probe_work_func) from [<c025a534>] (process_one_work+0x420/0x8f0)
> [ 9.261384] r10:e452fd84 r9:c2b53750 r8:00000000 r7:e452ae0c r6:e8a1e240 r5:e452ae00
> [ 9.261404] r4:c29d6440
> [ 9.261424] [<c025a114>] (process_one_work) from [<c025af00>] (worker_thread+0x4fc/0x91c)
> [ 9.261450] r10:e8a1e258 r9:e452ae00 r8:e8a1e254 r7:e8a1e240 r6:e452fd84 r5:e8a1e254
> [ 9.261470] r4:e452ae14
> [ 9.261492] [<c025aa04>] (worker_thread) from [<c026591c>] (kthread+0x21c/0x22c)
> [ 9.261517] r10:e455bce0 r9:e45b8d80 r8:e452ae00 r7:c025aa04 r6:e45b8d80 r5:00000000
> [ 9.261537] r4:e45c0400
> [ 9.261555] [<c0265700>] (kthread) from [<c0200114>] (ret_from_fork+0x14/0x20)
> [ 9.261575] Exception stack(0xe466bfb0 to 0xe466bff8)
> [ 9.261593] bfa0: 00000000 00000000 00000000 00000000
> [ 9.261618] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [ 9.261641] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [ 9.261663] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0265700
> [ 9.261683] r4:e4622080
> [ 9.261728] kobject_add_internal failed for scmi_notify with -EEXIST, don't try to register things with the same name in the same directory.
> [ 9.261805] arm-scmi brcm_scmi at 1: SCMI Notifications - Initialization Failed.
> [ 9.261847] arm-scmi brcm_scmi at 1: SCMI Notifications NOT available.
> [ 9.262026] arm-scmi brcm_scmi at 1: SCMI Protocol v1.0 'brcm-scmi:' Firmware version 0x1
>
> Fix this by using dev_name(handle->dev) which guarantees that the name is
> unique and this also helps correlate which notification workqueue corresponds
> to which SCMI device instance.
>
I am curious as how multiple SCMI instances are used. We know few limitations
in the code to handle that yet, so interested to know if you are carrying
more patches/fixes.
> Fixes: bd31b249692e ("firmware: arm_scmi: Add notification dispatch and delivery")
> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
> ---
> drivers/firmware/arm_scmi/notify.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c
> index 4731daaacd19..24c9ef232f48 100644
> --- a/drivers/firmware/arm_scmi/notify.c
> +++ b/drivers/firmware/arm_scmi/notify.c
> @@ -1468,7 +1468,7 @@ int scmi_notification_init(struct scmi_handle *handle)
> ni->gid = gid;
> ni->handle = handle;
>
> - ni->notify_wq = alloc_workqueue("scmi_notify",
> + ni->notify_wq = alloc_workqueue(dev_name(handle->dev),
Not sure if it makes sense to add "_notify" to clearly identify the workqueue.
> WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS,
> 0);
> if (!ni->notify_wq)
> --
> 2.25.1
>
--
Regards,
Sudeep
More information about the linux-arm-kernel
mailing list