[PATCH v2 2/4] net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver
Lukasz Stelmach
l.stelmach at samsung.com
Tue Oct 13 16:02:27 EDT 2020
It was <2020-10-03 sob 14:59>, when Heiner Kallweit wrote:
> On 02.10.2020 21:22, Łukasz Stelmach wrote:
>> ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
>> connected to a CPU with a 8/16-bit bus or with an SPI. This driver
>> supports SPI connection.
>>
>> The driver has been ported from the vendor kernel for ARTIK5[2]
>> boards. Several changes were made to adapt it to the current kernel
>> which include:
>>
>> + updated DT configuration,
>> + clock configuration moved to DT,
>> + new timer, ethtool and gpio APIs,
>> + dev_* instead of pr_* and custom printk() wrappers,
>> + removed awkward vendor power managemtn.
>>
>> [1]
>> https://protect2.fireeye.com/v1/url?k=f34a6c6f-ae99377b-f34be720-0cc47a31ce4e-31468d469d6422a1&q=1&e=9cb90086-9be8-4db6-8a58-c5447926b709&u=https%3A%2F%2Fwww.asix.com.tw%2Fproducts.php%3Fop%3DpItemdetail%26PItemID%3D104%3B65%3B86%26PLine%3D65
>> [2]
>> https://protect2.fireeye.com/v1/url?k=67412e7e-3a92756a-6740a531-0cc47a31ce4e-4192baccfff43dec&q=1&e=9cb90086-9be8-4db6-8a58-c5447926b709&u=https%3A%2F%2Fgit.tizen.org%2Fcgit%2Fprofile%2Fcommon%2Fplatform%2Fkernel%2Flinux-3.10-artik%2F
>>
>> The other ax88796 driver is for NE2000 compatible AX88796L chip. These
>> chips are not compatible. Hence, two separate drivers are required.
>>
>> Signed-off-by: Łukasz Stelmach <l.stelmach at samsung.com>
>> ---
>> MAINTAINERS | 6 +
>> drivers/net/ethernet/Kconfig | 1 +
>> drivers/net/ethernet/Makefile | 1 +
>> drivers/net/ethernet/asix/Kconfig | 21 +
>> drivers/net/ethernet/asix/Makefile | 6 +
>> drivers/net/ethernet/asix/ax88796c_ioctl.c | 241 +++++
>> drivers/net/ethernet/asix/ax88796c_ioctl.h | 27 +
>> drivers/net/ethernet/asix/ax88796c_main.c | 1041 ++++++++++++++++++++
>> drivers/net/ethernet/asix/ax88796c_main.h | 568 +++++++++++
>> drivers/net/ethernet/asix/ax88796c_spi.c | 111 +++
>> drivers/net/ethernet/asix/ax88796c_spi.h | 69 ++
>> 11 files changed, 2092 insertions(+)
>> create mode 100644 drivers/net/ethernet/asix/Kconfig
>> create mode 100644 drivers/net/ethernet/asix/Makefile
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_ioctl.h
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_main.h
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.c
>> create mode 100644 drivers/net/ethernet/asix/ax88796c_spi.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index deaafb617361..654eb0127479 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -2822,6 +2822,12 @@ S: Maintained
>> F: Documentation/hwmon/asc7621.rst
>> F: drivers/hwmon/asc7621.c
>>
>> +ASIX AX88796C SPI ETHERNET ADAPTER
>> +M: Łukasz Stelmach <l.stelmach at samsung.com>
>> +S: Maintained
>> +F: Documentation/devicetree/bindings/net/asix,ax99706c-spi.yaml
>> +F: drivers/net/ethernet/asix/ax88796c_*
>> +
>> ASPEED PINCTRL DRIVERS
>> M: Andrew Jeffery <andrew at aj.id.au>
>> L: linux-aspeed at lists.ozlabs.org (moderated for non-subscribers)
>> diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
>> index de50e8b9e656..f3b218e45ea5 100644
>> --- a/drivers/net/ethernet/Kconfig
>> +++ b/drivers/net/ethernet/Kconfig
>> @@ -32,6 +32,7 @@ source "drivers/net/ethernet/apm/Kconfig"
>> source "drivers/net/ethernet/apple/Kconfig"
>> source "drivers/net/ethernet/aquantia/Kconfig"
>> source "drivers/net/ethernet/arc/Kconfig"
>> +source "drivers/net/ethernet/asix/Kconfig"
>> source "drivers/net/ethernet/atheros/Kconfig"
>> source "drivers/net/ethernet/aurora/Kconfig"
>> source "drivers/net/ethernet/broadcom/Kconfig"
>> diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
>> index f8f38dcb5f8a..9eb368d93607 100644
>> --- a/drivers/net/ethernet/Makefile
>> +++ b/drivers/net/ethernet/Makefile
>> @@ -18,6 +18,7 @@ obj-$(CONFIG_NET_XGENE) += apm/
>> obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
>> obj-$(CONFIG_NET_VENDOR_AQUANTIA) += aquantia/
>> obj-$(CONFIG_NET_VENDOR_ARC) += arc/
>> +obj-$(CONFIG_NET_VENDOR_ASIX) += asix/
>> obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
>> obj-$(CONFIG_NET_VENDOR_AURORA) += aurora/
>> obj-$(CONFIG_NET_VENDOR_CADENCE) += cadence/
>> diff --git a/drivers/net/ethernet/asix/Kconfig b/drivers/net/ethernet/asix/Kconfig
>> new file mode 100644
>> index 000000000000..7caa45607450
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/Kconfig
>> @@ -0,0 +1,21 @@
>> +#
>> +# Asix network device configuration
>> +#
>> +
>> +config NET_VENDOR_ASIX
>> + bool "Asix devices"
>> + default y
>> + help
>> + If you have a network (Ethernet, non-USB, not NE2000 compatible)
>> + interface based on a chip from ASIX, say Y.
>> +
>> +if NET_VENDOR_ASIX
>> +
>> +config SPI_AX88796C
>> + tristate "Asix AX88796C-SPI support"
>> + depends on SPI
>> + depends on GPIOLIB
>> + help
>> + Say Y here if you intend to use ASIX AX88796C attached in SPI mode.
>> +
>> +endif # NET_VENDOR_ASIX
>> diff --git a/drivers/net/ethernet/asix/Makefile b/drivers/net/ethernet/asix/Makefile
>> new file mode 100644
>> index 000000000000..0bfbbb042634
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/Makefile
>> @@ -0,0 +1,6 @@
>> +#
>> +# Makefile for the Asix network device drivers.
>> +#
>> +
>> +obj-$(CONFIG_SPI_AX88796C) += ax88796c.o
>> +ax88796c-y := ax88796c_main.o ax88796c_ioctl.o ax88796c_spi.o
>> diff --git a/drivers/net/ethernet/asix/ax88796c_ioctl.c b/drivers/net/ethernet/asix/ax88796c_ioctl.c
>> new file mode 100644
>> index 000000000000..b3e3ac96790d
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_ioctl.c
>> @@ -0,0 +1,241 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#define pr_fmt(fmt) "ax88796c: " fmt
>> +
>> +#include <linux/bitmap.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/phy.h>
>> +#include <linux/netdevice.h>
>> +
>> +#include "ax88796c_main.h"
>> +#include "ax88796c_ioctl.h"
>> +
>> +static void ax88796c_get_drvinfo(struct net_device *ndev,
>> + struct ethtool_drvinfo *info)
>> +{
>> + /* Inherit standard device info */
>> + strncpy(info->driver, DRV_NAME, sizeof(info->driver));
>> +}
>> +
>> +static u32 ax88796c_get_link(struct net_device *ndev)
>
> Why not using ethtool_op_get_link ?
>
For no particualr reason other than lack of knowledge. It seems OK to
use it and it works fine.
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + phy_read_status(ndev->phydev);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return ndev->phydev->link;
>> +}
>> +
>> +static u32 ax88796c_get_msglevel(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + return ax_local->msg_enable;
>> +}
>> +
>> +static void ax88796c_set_msglevel(struct net_device *ndev, u32 level)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + ax_local->msg_enable = level;
>> +}
>> +
>> +static int
>> +ax88796c_get_link_ksettings(struct net_device *ndev,
>> + struct ethtool_link_ksettings *cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ret = phy_ethtool_get_link_ksettings(ndev, cmd);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int
>> +ax88796c_set_link_ksettings(struct net_device *ndev,
>> + const struct ethtool_link_ksettings *cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ret = phy_ethtool_set_link_ksettings(ndev, cmd);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return ret;
>> +}
>> +
>> +static int ax88796c_nway_reset(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ret = phy_ethtool_nway_reset(ndev);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return ret;
>> +}
>> +
>> +static u32 ax88796c_ethtool_getmsglevel(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + return ax_local->msg_enable;
>> +}
>> +
>> +static void ax88796c_ethtool_setmsglevel(struct net_device *ndev, u32 level)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + ax_local->msg_enable = level;
>> +}
>> +
>> +static int ax88796c_get_regs_len(struct net_device *ndev)
>> +{
>> + return AX88796C_REGDUMP_LEN + AX88796C_PHY_REGDUMP_LEN;
>> +}
>> +
>> +static void
>> +ax88796c_get_regs(struct net_device *ndev, struct ethtool_regs *regs, void *_p)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u16 *p = _p;
>> + int offset, i;
>> +
>> + memset(p, 0, AX88796C_REGDUMP_LEN);
>> +
>> + for (offset = 0; offset < AX88796C_REGDUMP_LEN; offset += 2) {
>> + if (!test_bit(offset / 2, ax88796c_no_regs_mask))
>> + *p = AX_READ(&ax_local->ax_spi, offset);
>> + p++;
>> + }
>> +
>> + for (i = 0; i < AX88796C_PHY_REGDUMP_LEN / 2; i++) {
>> + *p = phy_read(ax_local->phydev, i);
>> + p++;
>> + }
>> +}
>> +
>> +int ax88796c_mdio_read(struct mii_bus *mdiobus, int phy_id, int loc)
>> +{
>> + struct ax88796c_device *ax_local = mdiobus->priv;
>> + int ret;
>> +
>> + AX_WRITE(&ax_local->ax_spi, MDIOCR_RADDR(loc)
>> + | MDIOCR_FADDR(phy_id) | MDIOCR_READ, P2_MDIOCR);
>> +
>> + ret = read_poll_timeout(AX_READ, ret,
>> + (ret != 0),
>> + 0, jiffies_to_usecs(HZ / 100), false,
>> + &ax_local->ax_spi, P2_MDIOCR);
>> + if (ret)
>> + return -EBUSY;
>> +
>> + return AX_READ(&ax_local->ax_spi, P2_MDIODR);
>> +}
>> +
>> +int
>> +ax88796c_mdio_write(struct mii_bus *mdiobus, int phy_id, int loc, u16 val)
>> +{
>> + struct ax88796c_device *ax_local = mdiobus->priv;
>> + int ret;
>> +
>> + AX_WRITE(&ax_local->ax_spi, val, P2_MDIODR);
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + MDIOCR_RADDR(loc) | MDIOCR_FADDR(phy_id)
>> + | MDIOCR_WRITE, P2_MDIOCR);
>> +
>> + ret = read_poll_timeout(AX_READ, ret,
>> + ((ret & MDIOCR_VALID) != 0), 0,
>> + jiffies_to_usecs(HZ / 100), false,
>> + &ax_local->ax_spi, P2_MDIOCR);
>> + if (ret)
>> + return -EIO;
>> +
>> + if (loc == MII_ADVERTISE) {
>> + AX_WRITE(&ax_local->ax_spi, (BMCR_FULLDPLX | BMCR_ANRESTART |
>> + BMCR_ANENABLE | BMCR_SPEED100), P2_MDIODR);
>
> This looks very hacky. Why do you do this?
As I wrote Andy Lunn:
I will honestly say, I am not sure. Apparently it is not required and I
am willing to remove it. It could be of some use when the driver didn't
use phylib.
> What if the user wants to switch to fixed mode?
For the record, it doesn't look like it prevents a fixed mode. This code
runs when user changes the list of advertised modes which means they
want it to be used for autonegotiation so why not turn it on. However,
since it doesn't appear other drivers behave like this I will remove
this code.
>> + AX_WRITE(&ax_local->ax_spi, (MDIOCR_RADDR(MII_BMCR) |
>> + MDIOCR_FADDR(phy_id) | MDIOCR_WRITE),
>> + P2_MDIOCR);
>> +
>> + ret = read_poll_timeout(AX_READ, ret,
>> + ((ret & MDIOCR_VALID) != 0), 0,
>> + jiffies_to_usecs(HZ / 100), false,
>> + &ax_local->ax_spi, P2_MDIOCR);
>> + if (ret)
>> + return -EIO;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +void ax88796c_set_csums(struct ax88796c_device *ax_local)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> +
>> + if (ndev->features & NETIF_F_RXCSUM) {
>> + AX_WRITE(&ax_local->ax_spi, COERCR0_DEFAULT, P4_COERCR0);
>> + AX_WRITE(&ax_local->ax_spi, COERCR1_DEFAULT, P4_COERCR1);
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COERCR0);
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COERCR1);
>> + }
>> +
>> + if (ndev->features & NETIF_F_HW_CSUM) {
>> + AX_WRITE(&ax_local->ax_spi, COETCR0_DEFAULT, P4_COETCR0);
>> + AX_WRITE(&ax_local->ax_spi, COETCR1_TXPPPE, P4_COETCR1);
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COETCR0);
>> + AX_WRITE(&ax_local->ax_spi, 0, P4_COETCR1);
>> + }
>> +}
>> +
>> +const struct ethtool_ops ax88796c_ethtool_ops = {
>> + .get_drvinfo = ax88796c_get_drvinfo,
>> + .get_link = ax88796c_get_link,
>> + .get_msglevel = ax88796c_get_msglevel,
>> + .set_msglevel = ax88796c_set_msglevel,
>> + .get_link_ksettings = ax88796c_get_link_ksettings,
>> + .set_link_ksettings = ax88796c_set_link_ksettings,
>> + .nway_reset = ax88796c_nway_reset,
>> + .get_msglevel = ax88796c_ethtool_getmsglevel,
>> + .set_msglevel = ax88796c_ethtool_setmsglevel,
>> + .get_regs_len = ax88796c_get_regs_len,
>> + .get_regs = ax88796c_get_regs,
>> +};
>> +
>> +int ax88796c_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ret = phy_mii_ioctl(ndev->phydev, ifr, cmd);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return ret;
>> +}
>> diff --git a/drivers/net/ethernet/asix/ax88796c_ioctl.h b/drivers/net/ethernet/asix/ax88796c_ioctl.h
>> new file mode 100644
>> index 000000000000..d478981bf995
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_ioctl.h
>> @@ -0,0 +1,27 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#ifndef _AX88796C_IOCTL_H
>> +#define _AX88796C_IOCTL_H
>> +
>> +#include <linux/ethtool.h>
>> +#include <linux/netdevice.h>
>> +
>> +#include "ax88796c_main.h"
>> +
>> +extern const struct ethtool_ops ax88796c_ethtool_ops;
>> +
>> +bool ax88796c_check_power(const struct ax88796c_device *ax_local);
>> +bool ax88796c_check_power_and_wake(struct ax88796c_device *ax_local);
>> +void ax88796c_set_power_saving(struct ax88796c_device *ax_local, u8 ps_level);
>> +int ax88796c_mdio_read(struct mii_bus *mdiobus, int phy_id, int loc);
>> +int ax88796c_mdio_write(struct mii_bus *mdiobus, int phy_id, int loc, u16 val);
>> +void ax88796c_set_csums(struct ax88796c_device *ax_local);
>> +int ax88796c_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
>> +
>> +#endif
>> diff --git a/drivers/net/ethernet/asix/ax88796c_main.c b/drivers/net/ethernet/asix/ax88796c_main.c
>> new file mode 100644
>> index 000000000000..2148ea01362a
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_main.c
>> @@ -0,0 +1,1041 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics Co., Ltd.
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#define pr_fmt(fmt) "ax88796c: " fmt
>> +
>> +#include "ax88796c_main.h"
>> +#include "ax88796c_ioctl.h"
>> +
>> +#include <linux/bitmap.h>
>> +#include <linux/etherdevice.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/mdio.h>
>> +#include <linux/module.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/of.h>
>> +#include <linux/phy.h>
>> +#include <linux/spi/spi.h>
>> +
>> +static int comp;
>> +static int msg_enable = NETIF_MSG_PROBE |
>> + NETIF_MSG_LINK |
>> + /* NETIF_MSG_TIMER | */
>> + /* NETIF_MSG_IFDOWN | */
>> + /* NETIF_MSG_IFUP | */
>> + NETIF_MSG_RX_ERR |
>> + NETIF_MSG_TX_ERR |
>> + /* NETIF_MSG_TX_QUEUED | */
>> + /* NETIF_MSG_INTR | */
>> + /* NETIF_MSG_TX_DONE | */
>> + /* NETIF_MSG_RX_STATUS | */
>> + /* NETIF_MSG_PKTDATA | */
>> + /* NETIF_MSG_HW | */
>> + /* NETIF_MSG_WOL | */
>> + 0;
>> +
>> +static char *no_regs_list = "80018001,e1918001,8001a001,fc0d0000";
>> +unsigned long ax88796c_no_regs_mask[AX88796C_REGDUMP_LEN / (sizeof(unsigned long) * 8)];
>> +
>> +module_param(comp, int, 0444);
>> +MODULE_PARM_DESC(comp, "0=Non-Compression Mode, 1=Compression Mode");
>> +
>> +module_param(msg_enable, int, 0444);
>> +MODULE_PARM_DESC(msg_enable, "Message mask (see linux/netdevice.h for bitmap)");
>> +
>> +static int ax88796c_soft_reset(struct ax88796c_device *ax_local)
>> +{
>> + u16 temp;
>> + int ret;
>> +
>> + AX_WRITE(&ax_local->ax_spi, PSR_RESET, P0_PSR);
>> + AX_WRITE(&ax_local->ax_spi, PSR_RESET_CLR, P0_PSR);
>> +
>> + ret = read_poll_timeout(AX_READ, ret,
>> + (ret & PSR_DEV_READY),
>> + 0, jiffies_to_usecs(160 * HZ / 1000), false,
>> + &ax_local->ax_spi, P0_PSR);
>> + if (ret)
>> + return -1;
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P4_SPICR);
>> + if (ax_local->capabilities & AX_CAP_COMP) {
>> + AX_WRITE(&ax_local->ax_spi,
>> + (temp | SPICR_RCEN | SPICR_QCEN), P4_SPICR);
>> + ax_local->ax_spi.comp = 1;
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi,
>> + (temp & ~(SPICR_RCEN | SPICR_QCEN)), P4_SPICR);
>> + ax_local->ax_spi.comp = 0;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_reload_eeprom(struct ax88796c_device *ax_local)
>> +{
>> + int ret;
>> +
>> + AX_WRITE(&ax_local->ax_spi, EECR_RELOAD, P3_EECR);
>> +
>> + ret = read_poll_timeout(AX_READ, ret,
>> + (ret & PSR_DEV_READY),
>> + 0, jiffies_to_usecs(2 * HZ / 1000), false,
>> + &ax_local->ax_spi, P0_PSR);
>> + if (ret) {
>> + dev_err(&ax_local->spi->dev,
>> + "timeout waiting for reload eeprom\n");
>> + return -1;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_set_hw_multicast(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u16 rx_ctl = RXCR_AB;
>> + int mc_count = netdev_mc_count(ndev);
>> +
>> + memset(ax_local->multi_filter, 0, AX_MCAST_FILTER_SIZE);
>> +
>> + if (ndev->flags & IFF_PROMISC) {
>> + rx_ctl |= RXCR_PRO;
>> +
>> + } else if (ndev->flags & IFF_ALLMULTI || mc_count > AX_MAX_MCAST) {
>> + rx_ctl |= RXCR_AMALL;
>> +
>> + } else if (mc_count == 0) {
>> + /* just broadcast and directed */
>> + } else {
>> + u32 crc_bits;
>> + int i;
>> + struct netdev_hw_addr *ha;
>> +
>> + netdev_for_each_mc_addr(ha, ndev) {
>> + crc_bits = ether_crc(ETH_ALEN, ha->addr);
>> + ax_local->multi_filter[crc_bits >> 29] |=
>> + (1 << ((crc_bits >> 26) & 7));
>> + }
>> +
>> + for (i = 0; i < 4; i++) {
>> + AX_WRITE(&ax_local->ax_spi,
>> + ((ax_local->multi_filter[i * 2 + 1] << 8) |
>> + ax_local->multi_filter[i * 2]), P3_MFAR(i));
>> + }
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi, rx_ctl, P2_RXCR);
>> +}
>> +
>> +static void ax88796c_set_mac_addr(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[4] << 8) |
>> + (u16)ndev->dev_addr[5]), P3_MACASR0);
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[2] << 8) |
>> + (u16)ndev->dev_addr[3]), P3_MACASR1);
>> + AX_WRITE(&ax_local->ax_spi, ((u16)(ndev->dev_addr[0] << 8) |
>> + (u16)ndev->dev_addr[1]), P3_MACASR2);
>> +}
>> +
>> +static int ax88796c_set_mac_address(struct net_device *ndev, void *p)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sockaddr *addr = p;
>> +
>> + if (!is_valid_ether_addr(addr->sa_data))
>> + return -EADDRNOTAVAIL;
>> +
>> + memcpy(ndev->dev_addr, addr->sa_data, ndev->addr_len);
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ax88796c_set_mac_addr(ndev);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_load_mac_addr(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + u16 temp;
>> +
>> + /* Try the device tree first */
>> + if (!eth_platform_get_mac_address(&ax_local->spi->dev, ndev->dev_addr) &&
>> + is_valid_ether_addr(ndev->dev_addr)) {
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&ax_local->spi->dev,
>> + "MAC address read from device tree\n");
>> + return;
>> + }
>> +
>> + /* Read the MAC address from AX88796C */
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR0);
>> + ndev->dev_addr[5] = (u8)temp;
>> + ndev->dev_addr[4] = (u8)(temp >> 8);
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR1);
>> + ndev->dev_addr[3] = (u8)temp;
>> + ndev->dev_addr[2] = (u8)(temp >> 8);
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P3_MACASR2);
>> + ndev->dev_addr[1] = (u8)temp;
>> + ndev->dev_addr[0] = (u8)(temp >> 8);
>> +
>> + if (is_valid_ether_addr(ndev->dev_addr)) {
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&ax_local->spi->dev,
>> + "MAC address read from ASIX chip\n");
>> + return;
>> + }
>> +
>> + /* Use random address if none found */
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&ax_local->spi->dev, "Use random MAC address\n");
>> + eth_hw_addr_random(ndev);
>> +}
>> +
>> +static void ax88796c_proc_tx_hdr(struct tx_pkt_info *info, u8 ip_summed)
>> +{
>> + u16 pkt_len_bar = (~info->pkt_len & TX_HDR_SOP_PKTLENBAR);
>> +
>> + /* Prepare SOP header */
>> + info->sop.flags_len = info->pkt_len |
>> + ((ip_summed == CHECKSUM_NONE) ||
>> + (ip_summed == CHECKSUM_UNNECESSARY) ? TX_HDR_SOP_DICF : 0);
>> +
>> + info->sop.seq_lenbar = ((info->seq_num << 11) & TX_HDR_SOP_SEQNUM)
>> + | pkt_len_bar;
>> + cpu_to_be16s(&info->sop.flags_len);
>> + cpu_to_be16s(&info->sop.seq_lenbar);
>> +
>> + /* Prepare Segment header */
>> + info->seg.flags_seqnum_seglen = TX_HDR_SEG_FS | TX_HDR_SEG_LS
>> + | info->pkt_len;
>> +
>> + info->seg.eo_so_seglenbar = pkt_len_bar;
>> +
>> + cpu_to_be16s(&info->seg.flags_seqnum_seglen);
>> + cpu_to_be16s(&info->seg.eo_so_seglenbar);
>> +
>> + /* Prepare EOP header */
>> + info->eop.seq_len = ((info->seq_num << 11) &
>> + TX_HDR_EOP_SEQNUM) | info->pkt_len;
>> + info->eop.seqbar_lenbar = ((~info->seq_num << 11) &
>> + TX_HDR_EOP_SEQNUMBAR) | pkt_len_bar;
>> +
>> + cpu_to_be16s(&info->eop.seq_len);
>> + cpu_to_be16s(&info->eop.seqbar_lenbar);
>> +}
>> +
>> +static int
>> +ax88796c_check_free_pages(struct ax88796c_device *ax_local, u8 need_pages)
>> +{
>> + u8 free_pages;
>> + u16 tmp;
>> +
>> + free_pages = AX_READ(&ax_local->ax_spi, P0_TFBFCR) & TX_FREEBUF_MASK;
>> + if (free_pages < need_pages) {
>> + /* schedule free page interrupt */
>> + tmp = AX_READ(&ax_local->ax_spi, P0_TFBFCR)
>> + & TFBFCR_SCHE_FREE_PAGE;
>> + AX_WRITE(&ax_local->ax_spi, tmp | TFBFCR_TX_PAGE_SET |
>> + TFBFCR_SET_FREE_PAGE(need_pages),
>> + P0_TFBFCR);
>> + return -ENOMEM;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct sk_buff *
>> +ax88796c_tx_fixup(struct net_device *ndev, struct sk_buff_head *q)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sk_buff *skb, *tx_skb;
>> + struct tx_pkt_info *info;
>> + struct skb_data *entry;
>> + int headroom;
>> + int tailroom;
>> + u8 need_pages;
>> + u16 tol_len, pkt_len;
>> + u8 padlen, seq_num;
>> + u8 spi_len = ax_local->ax_spi.comp ? 1 : 4;
>> +
>> + if (skb_queue_empty(q))
>> + return NULL;
>> +
>> + skb = skb_peek(q);
>> + pkt_len = skb->len;
>> + need_pages = (pkt_len + TX_OVERHEAD + 127) >> 7;
>> + if (ax88796c_check_free_pages(ax_local, need_pages) != 0)
>> + return NULL;
>> +
>> + headroom = skb_headroom(skb);
>> + tailroom = skb_tailroom(skb);
>> + padlen = ((pkt_len + 3) & 0x7FC) - pkt_len;
>> + tol_len = ((pkt_len + 3) & 0x7FC) +
>> + TX_OVERHEAD + TX_EOP_SIZE + spi_len;
>> + seq_num = ++ax_local->seq_num & 0x1F;
>> +
>> + info = (struct tx_pkt_info *)skb->cb;
>> + info->pkt_len = pkt_len;
>> +
>> + if ((!skb_cloned(skb)) &&
>> + (headroom >= (TX_OVERHEAD + spi_len)) &&
>> + (tailroom >= (padlen + TX_EOP_SIZE))) {
>> + info->seq_num = seq_num;
>> + ax88796c_proc_tx_hdr(info, skb->ip_summed);
>> +
>> + /* SOP and SEG header */
>> + memcpy(skb_push(skb, TX_OVERHEAD), &info->sop, TX_OVERHEAD);
>> +
>> + /* Write SPI TXQ header */
>> + memcpy(skb_push(skb, spi_len), tx_cmd_buf, spi_len);
>> +
>> + /* Make 32-bit alignment */
>> + skb_put(skb, padlen);
>> +
>> + /* EOP header */
>> + memcpy(skb_put(skb, TX_EOP_SIZE), &info->eop, TX_EOP_SIZE);
>> +
>> + tx_skb = skb;
>> + skb_unlink(skb, q);
>> + } else {
>> + tx_skb = alloc_skb(tol_len, GFP_KERNEL);
>
> Are you sure GFP_KERNEL is appropriate here and you don't have
> to use GFP_ATOMIC?
>
Well… It's not called from the ISR but rather from a work queue.
>> + if (!tx_skb)
>> + return NULL;
>> +
>> + /* Write SPI TXQ header */
>> + memcpy(skb_put(tx_skb, spi_len), tx_cmd_buf, spi_len);
>> +
>> + info->seq_num = seq_num;
>> + ax88796c_proc_tx_hdr(info, skb->ip_summed);
>> +
>> + /* SOP and SEG header */
>> + memcpy(skb_put(tx_skb, TX_OVERHEAD),
>> + &info->sop, TX_OVERHEAD);
>> +
>> + /* Packet */
>> + memcpy(skb_put(tx_skb, ((pkt_len + 3) & 0xFFFC)),
>> + skb->data, pkt_len);
>> +
>> + /* EOP header */
>> + memcpy(skb_put(tx_skb, TX_EOP_SIZE),
>> + &info->eop, TX_EOP_SIZE);
>> +
>> + skb_unlink(skb, q);
>> + dev_kfree_skb(skb);
>> + }
>> +
>> + entry = (struct skb_data *)tx_skb->cb;
>> + memset(entry, 0, sizeof(*entry));
>> + entry->len = pkt_len;
>> +
>> + if (netif_msg_pktdata(ax_local)) {
>> + char pfx[IFNAMSIZ + 7];
>> +
>> + snprintf(pfx, sizeof(pfx), "%s: ", ndev->name);
>> +
>> + netdev_info(ndev, "TX packet len %d, total len %d, seq %d\n",
>> + pkt_len, tx_skb->len, seq_num);
>> +
>> + netdev_info(ndev, " SPI Header:\n");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + tx_skb->data, 4, 0);
>> +
>> + netdev_info(ndev, " TX SOP:\n");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + tx_skb->data + 4, TX_OVERHEAD, 0);
>> +
>> + netdev_info(ndev, " TX packet:\n");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + tx_skb->data + 4 + TX_OVERHEAD,
>> + tx_skb->len - TX_EOP_SIZE - 4 - TX_OVERHEAD, 0);
>> +
>> + netdev_info(ndev, " TX EOP:\n");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + tx_skb->data + tx_skb->len - 4, 4, 0);
>> + }
>> +
>> + return tx_skb;
>> +}
>> +
>> +static int ax88796c_hard_xmit(struct ax88796c_device *ax_local)
>> +{
>> + struct sk_buff *tx_skb;
>> + struct skb_data *entry;
>> +
>> + tx_skb = ax88796c_tx_fixup(ax_local->ndev, &ax_local->tx_wait_q);
>> +
>> + if (!tx_skb)
>> + return 0;
>> +
>> + entry = (struct skb_data *)tx_skb->cb;
>> +
>> + AX_WRITE(&ax_local->ax_spi,
>> + (TSNR_TXB_START | TSNR_PKT_CNT(1)), P0_TSNR);
>> +
>> + axspi_write_txq(&ax_local->ax_spi, tx_skb->data, tx_skb->len);
>> +
>> + if (((AX_READ(&ax_local->ax_spi, P0_TSNR) & TXNR_TXB_IDLE) == 0) ||
>> + ((ISR_TXERR & AX_READ(&ax_local->ax_spi, P0_ISR)) != 0)) {
>> + /* Ack tx error int */
>> + AX_WRITE(&ax_local->ax_spi, ISR_TXERR, P0_ISR);
>> +
>> + ax_local->stats.tx_dropped++;
>> +
>> + netif_err(ax_local, tx_err, ax_local->ndev,
>> + "TX FIFO error, re-initialize the TX bridge\n");
>> +
>> + /* Reinitial tx bridge */
>> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT |
>> + AX_READ(&ax_local->ax_spi, P0_TSNR), P0_TSNR);
>> + ax_local->seq_num = 0;
>> + } else {
>> + ax_local->stats.tx_packets++;
>> + ax_local->stats.tx_bytes += entry->len;
>> + }
>> +
>> + entry->state = tx_done;
>> + dev_kfree_skb(tx_skb);
>> +
>> + return 1;
>> +}
>> +
>> +static int
>> +ax88796c_start_xmit(struct sk_buff *skb, struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + skb_queue_tail(&ax_local->tx_wait_q, skb);
>> + if (skb_queue_len(&ax_local->tx_wait_q) > TX_QUEUE_HIGH_WATER) {
>> + netif_err(ax_local, tx_queued, ndev,
>> + "Too much TX packets in queue %d\n",
>> + skb_queue_len(&ax_local->tx_wait_q));
>> +
>> + netif_stop_queue(ndev);
>> + }
>> +
>> + set_bit(EVENT_TX, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +
>> + return NETDEV_TX_OK;
>> +}
>> +
>> +static void
>> +ax88796c_skb_return(struct ax88796c_device *ax_local, struct sk_buff *skb,
>> + struct rx_header *rxhdr)
>> +{
>> + struct net_device *ndev = ax_local->ndev;
>> + int status;
>> +
>> + do {
>> + if (!(ndev->features & NETIF_F_RXCSUM))
>> + break;
>> +
>> + /* checksum error bit is set */
>> + if ((rxhdr->flags & RX_HDR3_L3_ERR) ||
>> + (rxhdr->flags & RX_HDR3_L4_ERR))
>> + break;
>> +
>> + /* Other types may be indicated by more than one bit. */
>> + if ((rxhdr->flags & RX_HDR3_L4_TYPE_TCP) ||
>> + (rxhdr->flags & RX_HDR3_L4_TYPE_UDP))
>> + skb->ip_summed = CHECKSUM_UNNECESSARY;
>> + } while (0);
>
> Why this do {} while(0) construct? If you want to separate this code,
> then put it into its own function.
>
>> +
>> + ax_local->stats.rx_packets++;
>> + ax_local->stats.rx_bytes += skb->len;
>> + skb->dev = ndev;
>> +
>> + skb->truesize = skb->len + sizeof(struct sk_buff);
>> + skb->protocol = eth_type_trans(skb, ax_local->ndev);
>> +
>> + netif_info(ax_local, rx_status, ndev, "< rx, len %zu, type 0x%x\n",
>> + skb->len + sizeof(struct ethhdr), skb->protocol);
>> +
>> + status = netif_rx(skb);
>> + if (status != NET_RX_SUCCESS)
>> + netif_info(ax_local, rx_err, ndev,
>> + "netif_rx status %d\n", status);
>> +}
>> +
>> +static void
>> +ax88796c_rx_fixup(struct ax88796c_device *ax_local, struct sk_buff *rx_skb)
>> +{
>> + struct rx_header *rxhdr = (struct rx_header *)rx_skb->data;
>> + struct net_device *ndev = ax_local->ndev;
>> + u16 len;
>> +
>> + be16_to_cpus(&rxhdr->flags_len);
>> + be16_to_cpus(&rxhdr->seq_lenbar);
>> + be16_to_cpus(&rxhdr->flags);
>> +
>> + if ((((short)rxhdr->flags_len) & RX_HDR1_PKT_LEN) !=
>> + (~((short)rxhdr->seq_lenbar) & 0x7FF)) {
>> + netif_err(ax_local, rx_err, ndev, "Header error\n");
>> +
>> + ax_local->stats.rx_frame_errors++;
>> + kfree_skb(rx_skb);
>> + return;
>> + }
>> +
>> + if ((rxhdr->flags_len & RX_HDR1_MII_ERR) ||
>> + (rxhdr->flags_len & RX_HDR1_CRC_ERR)) {
>> + netif_err(ax_local, rx_err, ndev, "CRC or MII error\n");
>> +
>> + ax_local->stats.rx_crc_errors++;
>> + kfree_skb(rx_skb);
>> + return;
>> + }
>> +
>> + len = rxhdr->flags_len & RX_HDR1_PKT_LEN;
>> + if (netif_msg_pktdata(ax_local)) {
>> + char pfx[IFNAMSIZ + 7];
>> +
>> + snprintf(pfx, sizeof(pfx), "%s: ", ndev->name);
>> + netdev_info(ndev, "RX data, total len %d, packet len %d\n",
>> + rx_skb->len, len);
>> +
>> + netdev_info(ndev, " Dump RX packet header:");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + rx_skb->data, sizeof(*rxhdr), 0);
>> +
>> + netdev_info(ndev, " Dump RX packet:");
>> + print_hex_dump(KERN_INFO, pfx, DUMP_PREFIX_OFFSET, 16, 1,
>> + rx_skb->data + sizeof(*rxhdr), len, 0);
>> + }
>> +
>> + skb_pull(rx_skb, sizeof(*rxhdr));
>> + __pskb_trim(rx_skb, len);
>> +
>> + return ax88796c_skb_return(ax_local, rx_skb, rxhdr);
>> +}
>> +
>> +static int ax88796c_receive(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + struct sk_buff *skb;
>> + struct skb_data *entry;
>> + u16 w_count, pkt_len;
>> + u8 pkt_cnt;
>> +
>> + /* check rx packet and total word count */
>> + AX_WRITE(&ax_local->ax_spi, AX_READ(&ax_local->ax_spi, P0_RTWCR)
>> + | RTWCR_RX_LATCH, P0_RTWCR);
>> +
>> + pkt_cnt = AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_PKT_MASK;
>> + if (!pkt_cnt)
>> + return 0;
>> +
>> + pkt_len = AX_READ(&ax_local->ax_spi, P0_RCPHR) & 0x7FF;
>> +
>> + w_count = ((pkt_len + 6 + 3) & 0xFFFC) >> 1;
>> +
>> + skb = alloc_skb((w_count * 2), GFP_KERNEL);
>
> Also here, sure you don't have to use GFP_ATOMIC?
>
This one, indeed, is inside ISR. Done.
>> + if (!skb) {
>> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_DISCARD, P0_RXBCR1);
>> + return 0;
>> + }
>> + entry = (struct skb_data *)skb->cb;
>> +
>> + AX_WRITE(&ax_local->ax_spi, RXBCR1_RXB_START | w_count, P0_RXBCR1);
>> +
>> + axspi_read_rxq(&ax_local->ax_spi,
>> + skb_put(skb, w_count * 2), skb->len);
>> +
>> + /* Check if rx bridge is idle */
>> + if ((AX_READ(&ax_local->ax_spi, P0_RXBCR2) & RXBCR2_RXB_IDLE) == 0) {
>> + netif_err(ax_local, rx_err, ndev,
>> + "Rx Bridge is not idle\n");
>> + AX_WRITE(&ax_local->ax_spi, RXBCR2_RXB_REINIT, P0_RXBCR2);
>> +
>> + entry->state = rx_err;
>> + } else {
>> + entry->state = rx_done;
>> + }
>> +
>> + AX_WRITE(&ax_local->ax_spi, ISR_RXPKT, P0_ISR);
>> +
>> + ax88796c_rx_fixup(ax_local, skb);
>> +
>> + return 1;
>> +}
>> +
>> +static int ax88796c_process_isr(struct ax88796c_device *ax_local)
>> +{
>> + u16 isr;
>> + u8 done = 0;
>> + struct net_device *ndev = ax_local->ndev;
>> +
>> + isr = AX_READ(&ax_local->ax_spi, P0_ISR);
>> + AX_WRITE(&ax_local->ax_spi, isr, P0_ISR);
>> +
>> + netif_dbg(ax_local, intr, ndev, " ISR 0x%04x\n", isr);
>> +
>> + if (isr & ISR_TXERR) {
>> + netif_dbg(ax_local, intr, ndev, " TXERR interrupt\n");
>> + AX_WRITE(&ax_local->ax_spi, TXNR_TXB_REINIT, P0_TSNR);
>> + ax_local->seq_num = 0x1f;
>> + }
>> +
>> + if (isr & ISR_TXPAGES) {
>> + netif_dbg(ax_local, intr, ndev, " TXPAGES interrupt\n");
>> + set_bit(EVENT_TX, &ax_local->flags);
>> + }
>> +
>> + if (isr & ISR_LINK) {
>> + netif_dbg(ax_local, intr, ndev, " Link change interrupt\n");
>> + phy_mac_interrupt(ax_local->ndev->phydev);
>> + }
>> +
>> + if (isr & ISR_RXPKT) {
>> + netif_dbg(ax_local, intr, ndev, " RX interrupt\n");
>> + done = ax88796c_receive(ax_local->ndev);
>> + }
>> +
>> + return done;
>> +}
>> +
>> +static irqreturn_t ax88796c_interrupt(int irq, void *dev_instance)
>> +{
>> + struct net_device *ndev = dev_instance;
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + if (!ndev) {
>> + pr_err("irq %d for unknown device.\n", irq);
>> + return IRQ_RETVAL(0);
>> + }
>> +
>> + disable_irq_nosync(irq);
>> +
>> + netif_dbg(ax_local, intr, ndev, "Interrupt occurred\n");
>> +
>> + set_bit(EVENT_INTR, &ax_local->flags);
>> + queue_work(ax_local->ax_work_queue, &ax_local->ax_work);
>> +
>
> Why not simpy using a threaded interrupt?
> And in general: Why don't you use NAPI in the driver?
>
As I mention in the commit description this is a driver from a vendor
kernel. I am porting it to the mainline. I am willing to make it meet
standards and expectation, but my primary goal was to make it work
reliably without too many changes. If I understand correctly, using
threaded interrupt and getting rid(?) of the work queue means I need to
rework the transmitting code too. I'll be more than happy, if I can
avoid it.
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static void ax88796c_work(struct work_struct *work)
>> +{
>> + struct ax88796c_device *ax_local =
>> + container_of(work, struct ax88796c_device, ax_work);
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + if (test_bit(EVENT_SET_MULTI, &ax_local->flags)) {
>> + ax88796c_set_hw_multicast(ax_local->ndev);
>> + clear_bit(EVENT_SET_MULTI, &ax_local->flags);
>> + }
>> +
>> + if (test_bit(EVENT_INTR, &ax_local->flags)) {
>> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
>> +
>> + while (1) {
>> + if (!ax88796c_process_isr(ax_local))
>> + break;
>> + }
>> +
>> + clear_bit(EVENT_INTR, &ax_local->flags);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
>> +
>> + enable_irq(ax_local->ndev->irq);
>> + }
>> +
>> + if (test_bit(EVENT_TX, &ax_local->flags)) {
>> + while (skb_queue_len(&ax_local->tx_wait_q)) {
>> + if (!ax88796c_hard_xmit(ax_local))
>> + break;
>> + }
>> +
>> + clear_bit(EVENT_TX, &ax_local->flags);
>> +
>> + if (netif_queue_stopped(ax_local->ndev) &&
>> + (skb_queue_len(&ax_local->tx_wait_q) < TX_QUEUE_LOW_WATER))
>> + netif_wake_queue(ax_local->ndev);
>> + }
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +}
>> +
>> +static struct net_device_stats *ax88796c_get_stats(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + return &ax_local->stats;
>> +}
>> +
>> +static void ax88796c_handle_link_change(struct net_device *ndev)
>> +{
>> + if (net_ratelimit())
>> + phy_print_status(ndev->phydev);
>> +}
>> +
>> +void ax88796c_phy_init(struct ax88796c_device *ax_local)
>> +{
>> + /* Enable PHY auto-polling */
>> + AX_WRITE(&ax_local->ax_spi,
>> + PCR_PHYID(0x10) | PCR_POLL_EN |
>> + PCR_POLL_FLOWCTRL | PCR_POLL_BMCR, P2_PCR);
>> +}
>> +
>> +static int
>> +ax88796c_open(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + int ret;
>> + unsigned long irq_flag = IRQF_SHARED;
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + ret = ax88796c_soft_reset(ax_local);
>> + if (ret < 0)
>> + return -ENODEV;
>> +
>> + ret = request_irq(ndev->irq, ax88796c_interrupt,
>> + irq_flag, ndev->name, ndev);
>> + if (ret) {
>> + netdev_err(ndev, "unable to get IRQ %d (errno=%d).\n",
>> + ndev->irq, ret);
>> + return -ENXIO;
>> + }
>> +
>> + ax_local->seq_num = 0x1f;
>> +
>> + ax88796c_set_mac_addr(ndev);
>> + ax88796c_set_csums(ax_local);
>> +
>> + /* Disable stuffing packet */
>> + AX_WRITE(&ax_local->ax_spi,
>> + AX_READ(&ax_local->ax_spi, P1_RXBSPCR)
>> + & ~RXBSPCR_STUF_ENABLE, P1_RXBSPCR);
>> +
>> + /* Enable RX packet process */
>> + AX_WRITE(&ax_local->ax_spi, RPPER_RXEN, P1_RPPER);
>> +
>> + AX_WRITE(&ax_local->ax_spi, AX_READ(&ax_local->ax_spi, P0_FER)
>> + | FER_RXEN | FER_TXEN | FER_BSWAP | FER_IRQ_PULL, P0_FER);
>> +
>> + /* Setup LED mode */
>> + AX_WRITE(&ax_local->ax_spi,
>> + (LCR_LED0_EN | LCR_LED0_DUPLEX | LCR_LED1_EN |
>> + LCR_LED1_100MODE), P2_LCR0);
>> + AX_WRITE(&ax_local->ax_spi,
>> + (AX_READ(&ax_local->ax_spi, P2_LCR1) & LCR_LED2_MASK) |
>> + LCR_LED2_EN | LCR_LED2_LINK, P2_LCR1);
>> +
>> + ax88796c_phy_init(ax_local);
>> +
>> + phy_start(ax_local->ndev->phydev);
>> +
>> + netif_start_queue(ndev);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_DEFAULT, P0_IMR);
>> +
>> + spi_message_init(&ax_local->ax_spi.rx_msg);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> +
>> + return 0;
>> +}
>> +
>> +static void ax88796c_free_skb_queue(struct sk_buff_head *q)
>> +{
>> + struct sk_buff *skb;
>> +
>> + while (q->qlen) {
>> + skb = skb_dequeue(q);
>> + kfree_skb(skb);
>> + }
>> +}
>> +
>> +static int
>> +ax88796c_close(struct net_device *ndev)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> +
>> + netif_stop_queue(ndev);
>> +
>> + free_irq(ndev->irq, ndev);
>
> This looks racy. I think e.g. you can still get e.g. rx interrupts.
>
Done.
>> +
>> + phy_stop(ndev->phydev);
>> +
>> + mutex_lock(&ax_local->spi_lock);
>> +
>> + AX_WRITE(&ax_local->ax_spi, IMR_MASKALL, P0_IMR);
>> + ax88796c_free_skb_queue(&ax_local->tx_wait_q);
>> +
>> + ax88796c_soft_reset(ax_local);
>> +
>> + mutex_unlock(&ax_local->spi_lock);
>> + netif_carrier_off(ndev);
>> +
>> + return 0;
>> +}
>> +
>> +static int
>> +ax88796c_set_features(struct net_device *ndev, netdev_features_t features)
>> +{
>> + struct ax88796c_device *ax_local = to_ax88796c_device(ndev);
>> + netdev_features_t changed = features ^ ndev->features;
>> +
>> + if (!(changed & (NETIF_F_RXCSUM | NETIF_F_HW_CSUM)))
>> + return 0;
>> +
>> + ndev->features = features;
>> +
>> + if (changed & (NETIF_F_RXCSUM | NETIF_F_HW_CSUM))
>> + ax88796c_set_csums(ax_local);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct net_device_ops ax88796c_netdev_ops = {
>> + .ndo_open = ax88796c_open,
>> + .ndo_stop = ax88796c_close,
>> + .ndo_start_xmit = ax88796c_start_xmit,
>> + .ndo_get_stats = ax88796c_get_stats,
>> + .ndo_do_ioctl = ax88796c_ioctl,
>> + .ndo_set_mac_address = ax88796c_set_mac_address,
>> + .ndo_set_features = ax88796c_set_features,
>> +};
>> +
>> +static int ax88796c_hard_reset(struct ax88796c_device *ax_local)
>> +{
>> + struct device *dev = (struct device *)&ax_local->spi->dev;
>> + struct gpio_desc *reset_gpio;
>> +
>> + /* reset info */
>> + reset_gpio = gpiod_get(dev, "reset", 0);
>> + if (IS_ERR(reset_gpio)) {
>> + dev_err(dev, "Could not get 'reset' GPIO: %ld", PTR_ERR(reset_gpio));
>> + return PTR_ERR(reset_gpio);
>> + }
>> +
>> + /* set reset */
>> + gpiod_direction_output(reset_gpio, 1);
>> + msleep(100);
>> + gpiod_direction_output(reset_gpio, 0);
>> + gpiod_put(reset_gpio);
>> + msleep(20);
>> +
>> + return 0;
>> +}
>> +
>> +static int ax88796c_probe(struct spi_device *spi)
>> +{
>> + struct net_device *ndev;
>> + struct ax88796c_device *ax_local;
>> + int ret;
>> + u16 temp;
>> +
>> + ndev = devm_alloc_etherdev(&spi->dev, sizeof(*ax_local));
>> + if (!ndev) {
>> + dev_err(&spi->dev, "AX88796C SPI: Could not allocate ethernet device\n");
>> + return -ENOMEM;
>> + }
>> + SET_NETDEV_DEV(ndev, &spi->dev);
>> +
>> + ax_local = to_ax88796c_device(ndev);
>> + memset(ax_local, 0, sizeof(*ax_local));
>> +
>> + dev_set_drvdata(&spi->dev, ax_local);
>> + ax_local->spi = spi;
>> + ax_local->ax_spi.spi = spi;
>> +
>> + ax_local->ndev = ndev;
>> + ax_local->capabilities |= comp ? AX_CAP_COMP : 0;
>> + ax_local->msg_enable = msg_enable;
>> +
>> + ax_local->mdiobus = devm_mdiobus_alloc(&spi->dev);
>> + if (!ax_local->mdiobus) {
>> + dev_err(&spi->dev, "Could not allocate MDIO bus\n");
>> + return -ENOMEM;
>> + }
>> +
>> + ax_local->mdiobus->priv = ax_local;
>> + ax_local->mdiobus->read = ax88796c_mdio_read;
>> + ax_local->mdiobus->write = ax88796c_mdio_write;
>> + ax_local->mdiobus->name = "ax88976c-mdiobus";
>> + ax_local->mdiobus->phy_mask = ~(1 << 0x10);
>> + ax_local->mdiobus->parent = &spi->dev;
>> +
>> + snprintf(ax_local->mdiobus->id, ARRAY_SIZE(ax_local->mdiobus->id),
>> + "ax88796c-spi-%s.%u", dev_name(&spi->dev), spi->chip_select);
>> +
>> + ret = devm_mdiobus_register(&spi->dev, ax_local->mdiobus);
>> + if (ret < 0) {
>> + dev_err(&spi->dev, "Could not register MDIO bus\n");
>> + return ret;
>> + }
>> +
>> + if (netif_msg_probe(ax_local)) {
>> + dev_info(&spi->dev, "AX88796C-SPI Configuration:\n");
>> + dev_info(&spi->dev, " Compression : %s\n",
>> + ax_local->capabilities & AX_CAP_COMP ? "ON" : "OFF");
>> + }
>> +
>> + ndev->irq = spi->irq;
>> + ndev->netdev_ops = &ax88796c_netdev_ops;
>> + ndev->ethtool_ops = &ax88796c_ethtool_ops;
>> + ndev->hw_features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
>> + ndev->features |= NETIF_F_HW_CSUM | NETIF_F_RXCSUM;
>> + ndev->hard_header_len += (TX_OVERHEAD + 4);
>> +
>> + /* ax88796c gpio reset */
>> + ax88796c_hard_reset(ax_local);
>> +
>> + /* Reset AX88796C */
>> + ret = ax88796c_soft_reset(ax_local);
>> + if (ret < 0) {
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> + /* Check board revision */
>> + temp = AX_READ(&ax_local->ax_spi, P2_CRIR);
>> + if ((temp & 0xF) != 0x0) {
>> + dev_err(&spi->dev, "spi read failed: %d\n", temp);
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> +
>> + temp = AX_READ(&ax_local->ax_spi, P0_BOR);
>> + if (temp == 0x1234) {
>> + ax_local->plat_endian = PLAT_LITTLE_ENDIAN;
>> + } else {
>> + AX_WRITE(&ax_local->ax_spi, 0xFFFF, P0_BOR);
>> + ax_local->plat_endian = PLAT_BIG_ENDIAN;
>> + }
>> +
>> + /*Reload EEPROM*/
>> + ax88796c_reload_eeprom(ax_local);
>> +
>> + ax88796c_load_mac_addr(ndev);
>> +
>> + if (netif_msg_probe(ax_local))
>> + dev_info(&spi->dev,
>> + "irq %d, MAC addr %02X:%02X:%02X:%02X:%02X:%02X\n",
>> + ndev->irq,
>> + ndev->dev_addr[0], ndev->dev_addr[1],
>> + ndev->dev_addr[2], ndev->dev_addr[3],
>> + ndev->dev_addr[4], ndev->dev_addr[5]);
>> +
>> + /* Disable power saving */
>> + AX_WRITE(&ax_local->ax_spi, (AX_READ(&ax_local->ax_spi, P0_PSCR)
>> + & PSCR_PS_MASK) | PSCR_PS_D0, P0_PSCR);
>> +
>> + INIT_WORK(&ax_local->ax_work, ax88796c_work);
>> +
>> + ax_local->ax_work_queue =
>> + create_singlethread_workqueue("ax88796c_work");
>> +
>> + mutex_init(&ax_local->spi_lock);
>> +
>> + skb_queue_head_init(&ax_local->tx_wait_q);
>> +
>> + ret = devm_register_netdev(&spi->dev, ndev);
>> + if (ret) {
>> + dev_err(&spi->dev, "failed to register a network device\n");
>> + destroy_workqueue(ax_local->ax_work_queue);
>> + goto err;
>> + }
>> +
>> + ax_local->phydev = phy_find_first(ax_local->mdiobus);
>> + if (!ax_local->phydev) {
>> + dev_err(&spi->dev, "no PHY found\n");
>> + ret = -ENODEV;
>> + goto err;
>> + }
>> +
>> + ax_local->phydev->irq = PHY_IGNORE_INTERRUPT;
>> + phy_connect_direct(ax_local->ndev, ax_local->phydev,
>> + ax88796c_handle_link_change,
>> + PHY_INTERFACE_MODE_MII);
>> +
>> + netif_info(ax_local, probe, ndev, "%s %s registered\n",
>> + dev_driver_string(&spi->dev),
>> + dev_name(&spi->dev));
>> + phy_attached_info(ax_local->phydev);
>
> Does the integrated PHY provide a proper PHY ID?
Yes.
>
> Is there a PHY driver for it or do you rely on the genphy driver?
>
genphy
>> +
>> + ret = 0;
>> +err:
>> + return ret;
>> +}
>> +
>> +static int ax88796c_remove(struct spi_device *spi)
>> +{
>> + struct ax88796c_device *ax_local = dev_get_drvdata(&spi->dev);
>> + struct net_device *ndev = ax_local->ndev;
>> +
>> + netif_info(ax_local, probe, ndev, "removing network device %s %s\n",
>> + dev_driver_string(&spi->dev),
>> + dev_name(&spi->dev));
>> +
>> + destroy_workqueue(ax_local->ax_work_queue);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id ax88796c_dt_ids[] = {
>> + { .compatible = "asix,ax88796c" },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, ax88796c_dt_ids);
>> +
>> +static const struct spi_device_id asix_id[] = {
>> + { "ax88796c", 0 },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(spi, asix_id);
>> +
>> +static struct spi_driver ax88796c_spi_driver = {
>> + .driver = {
>> + .name = DRV_NAME,
>> +#ifdef CONFIG_USE_OF
>> + .of_match_table = of_match_ptr(ax88796c_dt_ids),
>> +#endif
>> + },
>> + .probe = ax88796c_probe,
>> + .remove = ax88796c_remove,
>> + .id_table = asix_id,
>> +};
>> +
>> +static __init int ax88796c_spi_init(void)
>> +{
>> + int ret;
>> +
>> + bitmap_zero(ax88796c_no_regs_mask, AX88796C_REGDUMP_LEN);
>> + ret = bitmap_parse(no_regs_list, 35,
>> + ax88796c_no_regs_mask, AX88796C_REGDUMP_LEN);
>> + if (ret) {
>> + bitmap_fill(ax88796c_no_regs_mask, AX88796C_REGDUMP_LEN);
>> + pr_err("Invalid bitmap description, masking all registers\n");
>> + }
>> +
>> + return spi_register_driver(&ax88796c_spi_driver);
>> +}
>> +
>> +static __exit void ax88796c_spi_exit(void)
>> +{
>> + spi_unregister_driver(&ax88796c_spi_driver);
>> +}
>> +
>> +module_init(ax88796c_spi_init);
>> +module_exit(ax88796c_spi_exit);
>> +
>> +MODULE_AUTHOR("ASIX");
>> +MODULE_DESCRIPTION("ASIX AX88796C SPI Ethernet driver");
>> +MODULE_LICENSE("GPL");
>> +
>> +/* ax88796c_phy */
>> diff --git a/drivers/net/ethernet/asix/ax88796c_main.h b/drivers/net/ethernet/asix/ax88796c_main.h
>> new file mode 100644
>> index 000000000000..428833978fbf
>> --- /dev/null
>> +++ b/drivers/net/ethernet/asix/ax88796c_main.h
>> @@ -0,0 +1,568 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2010 ASIX Electronics Corporation
>> + * Copyright (c) 2020 Samsung Electronics
>> + *
>> + * ASIX AX88796C SPI Fast Ethernet Linux driver
>> + */
>> +
>> +#ifndef _AX88796C_MAIN_H
>> +#define _AX88796C_MAIN_H
>> +
>> +#include <linux/netdevice.h>
>> +#include <linux/mii.h>
>> +
>> +#include "ax88796c_spi.h"
>> +
>> +/* These identify the driver base version and may not be removed. */
>> +#define DRV_NAME "ax88796c"
>> +#define ADP_NAME "ASIX AX88796C SPI Ethernet Adapter"
>> +#define DRV_VERSION "1.2.0"
>> +
> An benefit in using a separate driver version? Typically the
> kernel version is sufficient.
>
Removed.
>> +#define TX_QUEUE_HIGH_WATER 45 /* Tx queue high water mark */
>> +#define TX_QUEUE_LOW_WATER 20 /* Tx queue low water mark */
>> +
>> +#define AX88796C_REGDUMP_LEN 256
>> +#define AX88796C_PHY_REGDUMP_LEN 12
>> +
>> +#define TX_OVERHEAD 8
>> +#define TX_EOP_SIZE 4
>> +
>> +#define AX_MCAST_FILTER_SIZE 8
>> +#define AX_MAX_MCAST 64
>> +#define AX_MAX_CLK 80000000
>> +#define TX_HDR_SOP_DICF 0x8000
>> +#define TX_HDR_SOP_CPHI 0x4000
>> +#define TX_HDR_SOP_INT 0x2000
>> +#define TX_HDR_SOP_MDEQ 0x1000
>> +#define TX_HDR_SOP_PKTLEN 0x07FF
>> +#define TX_HDR_SOP_SEQNUM 0xF800
>> +#define TX_HDR_SOP_PKTLENBAR 0x07FF
>> +
>> +#define TX_HDR_SEG_FS 0x8000
>> +#define TX_HDR_SEG_LS 0x4000
>> +#define TX_HDR_SEG_SEGNUM 0x3800
>> +#define TX_HDR_SEG_SEGLEN 0x0700
>> +#define TX_HDR_SEG_EOFST 0xC000
>> +#define TX_HDR_SEG_SOFST 0x3800
>> +#define TX_HDR_SEG_SEGLENBAR 0x07FF
>> +
>> +#define TX_HDR_EOP_SEQNUM 0xF800
>> +#define TX_HDR_EOP_PKTLEN 0x07FF
>> +#define TX_HDR_EOP_SEQNUMBAR 0xF800
>> +#define TX_HDR_EOP_PKTLENBAR 0x07FF
>> +
>> +/* Rx header fields mask */
>> +#define RX_HDR1_MCBC 0x8000
>> +#define RX_HDR1_STUFF_PKT 0x4000
>> +#define RX_HDR1_MII_ERR 0x2000
>> +#define RX_HDR1_CRC_ERR 0x1000
>> +#define RX_HDR1_PKT_LEN 0x07FF
>> +
>> +#define RX_HDR2_SEQ_NUM 0xF800
>> +#define RX_HDR2_PKT_LEN_BAR 0x7FFF
>> +
>> +#define RX_HDR3_PE 0x8000
>> +#define RX_HDR3_L3_TYPE_IPV4V6 0x6000
>> +#define RX_HDR3_L3_TYPE_IP 0x4000
>> +#define RX_HDR3_L3_TYPE_IPV6 0x2000
>> +#define RX_HDR3_L4_TYPE_ICMPV6 0x1400
>> +#define RX_HDR3_L4_TYPE_TCP 0x1000
>> +#define RX_HDR3_L4_TYPE_IGMP 0x0c00
>> +#define RX_HDR3_L4_TYPE_ICMP 0x0800
>> +#define RX_HDR3_L4_TYPE_UDP 0x0400
>> +#define RX_HDR3_L3_ERR 0x0200
>> +#define RX_HDR3_L4_ERR 0x0100
>> +#define RX_HDR3_PRIORITY(x) ((x) << 4)
>> +#define RX_HDR3_STRIP 0x0008
>> +#define RX_HDR3_VLAN_ID 0x0007
>> +
>> +enum watchdog_state {
>> + chk_link = 0,
>> + chk_cable,
>> + ax_nop,
>> +};
>> +
>> +struct ax88796c_device {
>> + struct resource *addr_res; /* resources found */
>> + struct resource *addr_req; /* resources requested */
>> + struct resource *irq_res;
>> +
>> + struct spi_device *spi;
>> + struct net_device *ndev;
>> + struct net_device_stats stats;
>> +
>> + struct timer_list watchdog;
>> + enum watchdog_state w_state;
>> + size_t w_ticks;
>> +
>> + struct work_struct ax_work;
>> + struct workqueue_struct *ax_work_queue;
>> + struct tasklet_struct bh;
>> +
>> + struct mutex spi_lock; /* device access */
>> +
>> + struct sk_buff_head tx_wait_q;
>> +
>> + struct axspi_data ax_spi;
>> +
>> + struct mii_bus *mdiobus;
>> + struct phy_device *phydev;
>> +
>> + int msg_enable;
>> +
>> + u16 seq_num;
>> +
>> + u8 multi_filter[AX_MCAST_FILTER_SIZE];
>> +
>> + unsigned long capabilities;
>> + #define AX_CAP_DMA 1
>> + #define AX_CAP_COMP 2
>> + #define AX_CAP_BIDIR 4
>> +
>> + u8 plat_endian;
>> + #define PLAT_LITTLE_ENDIAN 0
>> + #define PLAT_BIG_ENDIAN 1
>> +
>> + unsigned long flags;
>> + #define EVENT_INTR 1
>> + #define EVENT_TX 2
>> + #define EVENT_SET_MULTI 4
>> +
>> +};
>> +
>> +#define to_ax88796c_device(ndev) ((struct ax88796c_device *)netdev_priv(ndev))
>> +
> Is this helper really needed? in The places I've seen you can assign
> the void* pointer returned netdev_priv().
>
As I said, it was not my code. I am porting it and this has worked. It
doesn't look that bad IMHO. Do you think I should change it?
Thanks for the feedback.
--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 487 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20201013/e72168ad/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list