[PATCH] net: stmmac: Don't call _irqoff() with hardirqs enabled

Vladimir Oltean olteanv at gmail.com
Thu Oct 8 19:46:09 EDT 2020


On Thu, Oct 08, 2020 at 05:27:49PM +0100, John Keeping wrote:
> With threadirqs, stmmac_interrupt() is called on a thread with hardirqs
> enabled so we cannot call __napi_schedule_irqoff().  Under lockdep it
> leads to:
> 
> 	------------[ cut here ]------------
> 	WARNING: CPU: 0 PID: 285 at kernel/softirq.c:598 __raise_softirq_irqoff+0x6c/0x1c8
> 	IRQs not disabled as expected
> 	Modules linked in: brcmfmac hci_uart btbcm cfg80211 brcmutil
> 	CPU: 0 PID: 285 Comm: irq/41-eth0 Not tainted 5.4.69-rt39 #1
> 	Hardware name: Rockchip (Device Tree)
> 	[<c0110d3c>] (unwind_backtrace) from [<c010c284>] (show_stack+0x10/0x14)
> 	[<c010c284>] (show_stack) from [<c0855504>] (dump_stack+0xa8/0xe0)
> 	[<c0855504>] (dump_stack) from [<c0120a9c>] (__warn+0xe0/0xfc)
> 	[<c0120a9c>] (__warn) from [<c0120e80>] (warn_slowpath_fmt+0x7c/0xa4)
> 	[<c0120e80>] (warn_slowpath_fmt) from [<c01278c8>] (__raise_softirq_irqoff+0x6c/0x1c8)
> 	[<c01278c8>] (__raise_softirq_irqoff) from [<c056bccc>] (stmmac_interrupt+0x388/0x4e0)
> 	[<c056bccc>] (stmmac_interrupt) from [<c0178714>] (irq_forced_thread_fn+0x28/0x64)
> 	[<c0178714>] (irq_forced_thread_fn) from [<c0178924>] (irq_thread+0x124/0x260)
> 	[<c0178924>] (irq_thread) from [<c0142ee8>] (kthread+0x154/0x164)
> 	[<c0142ee8>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38)
> 	Exception stack(0xeb7b5fb0 to 0xeb7b5ff8)
> 	5fa0:                                     00000000 00000000 00000000 00000000
> 	5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 	5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> 	irq event stamp: 48
> 	hardirqs last  enabled at (50): [<c085c200>] prb_unlock+0x7c/0x8c
> 	hardirqs last disabled at (51): [<c085c0dc>] prb_lock+0x58/0x100
> 	softirqs last  enabled at (0): [<c011e770>] copy_process+0x550/0x1654
> 	softirqs last disabled at (25): [<c01786ec>] irq_forced_thread_fn+0x0/0x64
> 	---[ end trace 0000000000000002 ]---
> 
> Use __napi_schedule() instead which will save & restore the interrupt
> state.
> 
> Fixes: 4ccb45857c2c ("net: stmmac: Fix NAPI poll in TX path when in multi-queue")
> Signed-off-by: John Keeping <john at metanate.com>
> ---

Don't get me wrong, this is so cool that the new lockdep warning is really
helping out finding real bugs, but the patch that adds that warning
(https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/commit/?id=cdabce2e3dff7e4bcef73473987618569d178af3)
isn't in 5.4.69-rt39, is it?



More information about the linux-arm-kernel mailing list