[PATCH 1/3] ARM: remove ebsa110 platform
Arnd Bergmann
arnd at arndb.de
Thu Oct 8 11:45:59 EDT 2020
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
MAINTAINERS | 8 -
arch/arm/Kconfig | 24 +-
arch/arm/Kconfig.debug | 6 +-
arch/arm/Makefile | 8 -
arch/arm/configs/ebsa110_defconfig | 74 ---
arch/arm/kernel/Makefile | 6 +-
arch/arm/mach-ebsa110/Makefile | 8 -
arch/arm/mach-ebsa110/Makefile.boot | 5 -
arch/arm/mach-ebsa110/core.c | 323 -------------
arch/arm/mach-ebsa110/core.h | 38 --
.../mach-ebsa110/include/mach/entry-macro.S | 33 --
arch/arm/mach-ebsa110/include/mach/hardware.h | 21 -
arch/arm/mach-ebsa110/include/mach/io.h | 89 ----
arch/arm/mach-ebsa110/include/mach/irqs.h | 17 -
arch/arm/mach-ebsa110/include/mach/memory.h | 22 -
.../mach-ebsa110/include/mach/uncompress.h | 41 --
arch/arm/mach-ebsa110/io.c | 440 ------------------
arch/arm/mach-ebsa110/leds.c | 71 ---
18 files changed, 6 insertions(+), 1228 deletions(-)
delete mode 100644 arch/arm/configs/ebsa110_defconfig
delete mode 100644 arch/arm/mach-ebsa110/Makefile
delete mode 100644 arch/arm/mach-ebsa110/Makefile.boot
delete mode 100644 arch/arm/mach-ebsa110/core.c
delete mode 100644 arch/arm/mach-ebsa110/core.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/entry-macro.S
delete mode 100644 arch/arm/mach-ebsa110/include/mach/hardware.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/io.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/irqs.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/memory.h
delete mode 100644 arch/arm/mach-ebsa110/include/mach/uncompress.h
delete mode 100644 arch/arm/mach-ebsa110/io.c
delete mode 100644 arch/arm/mach-ebsa110/leds.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 0d0862b19ce5..6096b16cac12 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1809,14 +1809,6 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: include/linux/moxtet.h
-ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux at armlinux.org.uk>
-L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-W: http://www.armlinux.org.uk/
-F: arch/arm/mach-ebsa110/
-F: drivers/net/ethernet/amd/am79c961a.*
-
ARM/ENERGY MICRO (SILICON LABS) EFM32 SUPPORT
M: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
R: Pengutronix Kernel Team <kernel at pengutronix.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e00d94b16658..a14266667bcd 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -264,8 +264,7 @@ config PHYS_OFFSET
hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
- default 0x00000000 if ARCH_EBSA110 || \
- ARCH_FOOTBRIDGE || \
+ default 0x00000000 if ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_REALVIEW
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
@@ -341,20 +340,6 @@ config ARM_SINGLE_ARMV7M
select SPARSE_IRQ
select USE_OF
-config ARCH_EBSA110
- bool "EBSA-110"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_SA110
- select ISA
- select NEED_MACH_IO_H
- select NEED_MACH_MEMORY_H
- select NO_IOPORT_MAP
- help
- This is an evaluation board for the StrongARM processor available
- from Digital. It has limited hardware on-board, including an
- Ethernet interface, two PCMCIA sockets, two serial ports and a
- parallel port.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_SPARSEMEM_ENABLE
@@ -1372,7 +1357,6 @@ config ARCH_NR_GPIO
config HZ_FIXED
int
- default 200 if ARCH_EBSA110
default 128 if SOC_AT91RM9200
default 0
@@ -1588,9 +1572,7 @@ config FORCE_MAX_ZONEORDER
a value of 11 means that the largest free memory block is 2^10 pages.
config ALIGNMENT_TRAP
- bool
- depends on CPU_CP15_MMU
- default y if !ARCH_EBSA110
+ def_bool CPU_CP15_MMU
select HAVE_PROC_CPU if PROC_FS
help
ARM processors cannot fetch/store information which is not
@@ -1799,7 +1781,7 @@ config CMDLINE
string "Default kernel command string"
default ""
help
- On some architectures (EBSA110 and CATS), there is currently no way
+ On some architectures (e.g. CATS), there is currently no way
for the boot loader to pass arguments to the kernel. For these
architectures, you should supply some command-line options at build
time by entering them here. As a minimum, you should specify the
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 80000a66a4e3..48e13a7c694b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1610,7 +1610,7 @@ config DEBUG_UART_PL01X
# Compatibility options for 8250
config DEBUG_UART_8250
- def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+ def_bool ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
@@ -1713,7 +1713,6 @@ config DEBUG_UART_PHYS
default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
default 0xe8009000 if DEBUG_R7S9210_SCIF4
default 0xf0000000 if DEBUG_DIGICOLOR_UA0
- default 0xf0000be0 if ARCH_EBSA110
default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1760,7 +1759,6 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
@@ -1896,7 +1894,7 @@ config DEBUG_UART_8250_PALMCHIP
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
config DEBUG_UNCOMPRESS
bool "Enable decompressor debugging via DEBUG_LL output"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4e877354515f..ec150cf06729 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -169,7 +169,6 @@ machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
machine-$(CONFIG_ARCH_DAVINCI) += davinci
machine-$(CONFIG_ARCH_DIGICOLOR) += digicolor
machine-$(CONFIG_ARCH_DOVE) += dove
-machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EFM32) += efm32
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_EXYNOS) += exynos
@@ -241,13 +240,6 @@ plat-$(CONFIG_PLAT_PXA) += pxa
plat-$(CONFIG_PLAT_S3C24XX) += samsung
plat-$(CONFIG_PLAT_VERSATILE) += versatile
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
-
# The byte offset of the kernel image in RAM from the start of RAM.
TEXT_OFFSET := $(textofs-y)
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
deleted file mode 100644
index 731a22a55f4e..000000000000
--- a/arch/arm/configs/ebsa110_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_ARCH_EBSA110=y
-CONFIG_PCCARD=m
-CONFIG_I82365=m
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rw mem=16M console=ttyS1,38400n8"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_FASTFPE=y
-CONFIG_BINFMT_AOUT=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_FW_LOADER=m
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AM79C961A=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_CS=m
-CONFIG_PRINTER=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_MSDOS_PARTITION is not set
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 89e5d864e923..09e67cb02b20 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,7 +17,7 @@ CFLAGS_REMOVE_return_address.o = -pg
# Object file lists.
obj-y := elf.o entry-common.o irq.o opcodes.o \
- process.o ptrace.o reboot.o \
+ process.o ptrace.o reboot.o io.o \
setup.o signal.o sigreturn_codes.o \
stacktrace.o sys_arm.o time.o traps.o
@@ -83,10 +83,6 @@ AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
-
-ifneq ($(CONFIG_ARCH_EBSA110),y)
- obj-y += io.o
-endif
obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
deleted file mode 100644
index 296541315d25..000000000000
--- a/arch/arm/mach-ebsa110/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y := core.o io.o leds.o
diff --git a/arch/arm/mach-ebsa110/Makefile.boot b/arch/arm/mach-ebsa110/Makefile.boot
deleted file mode 100644
index e7e98937c71b..000000000000
--- a/arch/arm/mach-ebsa110/Makefile.boot
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
- zreladdr-y += 0x00008000
-params_phys-y := 0x00000400
-initrd_phys-y := 0x00800000
-
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
deleted file mode 100644
index 5960e3dfd2bf..000000000000
--- a/arch/arm/mach-ebsa110/core.c
+++ /dev/null
@@ -1,323 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-ebsa110/core.c
- *
- * Copyright (C) 1998-2001 Russell King
- *
- * Extra MM routines for the EBSA-110 architecture
- */
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/serial_8250.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/system_misc.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-static void ebsa110_mask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MCLR);
-}
-
-static void ebsa110_unmask_irq(struct irq_data *d)
-{
- __raw_writeb(1 << d->irq, IRQ_MSET);
-}
-
-static struct irq_chip ebsa110_irq_chip = {
- .irq_ack = ebsa110_mask_irq,
- .irq_mask = ebsa110_mask_irq,
- .irq_unmask = ebsa110_unmask_irq,
-};
-
-static void __init ebsa110_init_irq(void)
-{
- unsigned long flags;
- unsigned int irq;
-
- local_irq_save(flags);
- __raw_writeb(0xff, IRQ_MCLR);
- __raw_writeb(0x55, IRQ_MSET);
- __raw_writeb(0x00, IRQ_MSET);
- if (__raw_readb(IRQ_MASK) != 0x55)
- while (1);
- __raw_writeb(0xff, IRQ_MCLR); /* clear all interrupt enables */
- local_irq_restore(flags);
-
- for (irq = 0; irq < NR_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &ebsa110_irq_chip,
- handle_level_irq);
- irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
- }
-}
-
-static struct map_desc ebsa110_io_desc[] __initdata = {
- /*
- * sparse external-decode ISAIO space
- */
- { /* IRQ_STAT/IRQ_MCLR */
- .virtual = (unsigned long)IRQ_STAT,
- .pfn = __phys_to_pfn(TRICK4_PHYS),
- .length = TRICK4_SIZE,
- .type = MT_DEVICE
- }, { /* IRQ_MASK/IRQ_MSET */
- .virtual = (unsigned long)IRQ_MASK,
- .pfn = __phys_to_pfn(TRICK3_PHYS),
- .length = TRICK3_SIZE,
- .type = MT_DEVICE
- }, { /* SOFT_BASE */
- .virtual = (unsigned long)SOFT_BASE,
- .pfn = __phys_to_pfn(TRICK1_PHYS),
- .length = TRICK1_SIZE,
- .type = MT_DEVICE
- }, { /* PIT_BASE */
- .virtual = (unsigned long)PIT_BASE,
- .pfn = __phys_to_pfn(TRICK0_PHYS),
- .length = TRICK0_SIZE,
- .type = MT_DEVICE
- },
-
- /*
- * self-decode ISAIO space
- */
- {
- .virtual = ISAIO_BASE,
- .pfn = __phys_to_pfn(ISAIO_PHYS),
- .length = ISAIO_SIZE,
- .type = MT_DEVICE
- }, {
- .virtual = ISAMEM_BASE,
- .pfn = __phys_to_pfn(ISAMEM_PHYS),
- .length = ISAMEM_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init ebsa110_map_io(void)
-{
- iotable_init(ebsa110_io_desc, ARRAY_SIZE(ebsa110_io_desc));
-}
-
-static void __iomem *ebsa110_ioremap_caller(phys_addr_t cookie, size_t size,
- unsigned int flags, void *caller)
-{
- return (void __iomem *)cookie;
-}
-
-static void ebsa110_iounmap(volatile void __iomem *io_addr)
-{}
-
-static void __init ebsa110_init_early(void)
-{
- arch_ioremap_caller = ebsa110_ioremap_caller;
- arch_iounmap = ebsa110_iounmap;
-}
-
-#define PIT_CTRL (PIT_BASE + 0x0d)
-#define PIT_T2 (PIT_BASE + 0x09)
-#define PIT_T1 (PIT_BASE + 0x05)
-#define PIT_T0 (PIT_BASE + 0x01)
-
-/*
- * This is the rate at which your MCLK signal toggles (in Hz)
- * This was measured on a 10 digit frequency counter sampling
- * over 1 second.
- */
-#define MCLK 47894000
-
-/*
- * This is the rate at which the PIT timers get clocked
- */
-#define CLKBY7 (MCLK / 7)
-
-/*
- * This is the counter value. We tick at 200Hz on this platform.
- */
-#define COUNT ((CLKBY7 + (HZ / 2)) / HZ)
-
-/*
- * Get the time offset from the system PIT. Note that if we have missed an
- * interrupt, then the PIT counter will roll over (ie, be negative).
- * This actually works out to be convenient.
- */
-static u32 ebsa110_gettimeoffset(void)
-{
- unsigned long offset, count;
-
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- /*
- * If count > COUNT, make the number negative.
- */
- if (count > COUNT)
- count |= 0xffff0000;
-
- offset = COUNT;
- offset -= count;
-
- /*
- * `offset' is in units of timer counts. Convert
- * offset to units of microseconds.
- */
- offset = offset * (1000000 / HZ) / COUNT;
-
- return offset * 1000;
-}
-
-static irqreturn_t
-ebsa110_timer_interrupt(int irq, void *dev_id)
-{
- u32 count;
-
- /* latch and read timer 1 */
- __raw_writeb(0x40, PIT_CTRL);
- count = __raw_readb(PIT_T1);
- count |= __raw_readb(PIT_T1) << 8;
-
- count += COUNT;
-
- __raw_writeb(count & 0xff, PIT_T1);
- __raw_writeb(count >> 8, PIT_T1);
-
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-/*
- * Set up timer interrupt.
- */
-void __init ebsa110_timer_init(void)
-{
- int irq = IRQ_EBSA110_TIMER0;
-
- arch_gettimeoffset = ebsa110_gettimeoffset;
-
- /*
- * Timer 1, mode 2, LSB/MSB
- */
- __raw_writeb(0x70, PIT_CTRL);
- __raw_writeb(COUNT & 0xff, PIT_T1);
- __raw_writeb(COUNT >> 8, PIT_T1);
-
- if (request_irq(irq, ebsa110_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
- "EBSA110 Timer Tick", NULL))
- pr_err("Failed to request irq %d (EBSA110 Timer Tick)\n", irq);
-}
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .iobase = 0x3f8,
- .irq = 1,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .iobase = 0x2f8,
- .irq = 2,
- .uartclk = 1843200,
- .regshift = 0,
- .iotype = UPIO_PORT,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct resource am79c961_resources[] = {
- {
- .start = 0x220,
- .end = 0x238,
- .flags = IORESOURCE_IO,
- }, {
- .start = IRQ_EBSA110_ETHERNET,
- .end = IRQ_EBSA110_ETHERNET,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device am79c961_device = {
- .name = "am79c961",
- .id = -1,
- .num_resources = ARRAY_SIZE(am79c961_resources),
- .resource = am79c961_resources,
-};
-
-static struct platform_device *ebsa110_devices[] = {
- &serial_device,
- &am79c961_device,
-};
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static void ebsa110_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-static int __init ebsa110_init(void)
-{
- arm_pm_idle = ebsa110_idle;
- return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
-}
-
-arch_initcall(ebsa110_init);
-
-static void ebsa110_restart(enum reboot_mode mode, const char *cmd)
-{
- soft_restart(0x80000000);
-}
-
-MACHINE_START(EBSA110, "EBSA110")
- /* Maintainer: Russell King */
- .atag_offset = 0x400,
- .reserve_lp0 = 1,
- .reserve_lp2 = 1,
- .map_io = ebsa110_map_io,
- .init_early = ebsa110_init_early,
- .init_irq = ebsa110_init_irq,
- .init_time = ebsa110_timer_init,
- .restart = ebsa110_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h
deleted file mode 100644
index 47acc610b6b4..000000000000
--- a/arch/arm/mach-ebsa110/core.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the core hardware definitions of the EBSA-110.
- */
-#ifndef CORE_H
-#define CORE_H
-
-/* Physical addresses/sizes */
-#define ISAMEM_PHYS 0xe0000000
-#define ISAMEM_SIZE 0x10000000
-
-#define ISAIO_PHYS 0xf0000000
-#define ISAIO_SIZE PGDIR_SIZE
-
-#define TRICK0_PHYS 0xf2000000
-#define TRICK0_SIZE PGDIR_SIZE
-#define TRICK1_PHYS 0xf2400000
-#define TRICK1_SIZE PGDIR_SIZE
-#define TRICK2_PHYS 0xf2800000
-#define TRICK3_PHYS 0xf2c00000
-#define TRICK3_SIZE PGDIR_SIZE
-#define TRICK4_PHYS 0xf3000000
-#define TRICK4_SIZE PGDIR_SIZE
-#define TRICK5_PHYS 0xf3400000
-#define TRICK6_PHYS 0xf3800000
-#define TRICK7_PHYS 0xf3c00000
-
-/* Virtual addresses */
-#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */
-#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */
-#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */
-#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */
-#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */
-#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
deleted file mode 100644
index 14b110de78a9..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for ebsa110 platform.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-
-
-#define IRQ_STAT 0xff000000 /* read */
-
- .macro get_irqnr_preamble, base, tmp
- mov \base, #IRQ_STAT
- .endm
-
- .macro get_irqnr_and_base, irqnr, stat, base, tmp
- ldrb \stat, [\base] @ get interrupts
- mov \irqnr, #0
- tst \stat, #15
- addeq \irqnr, \irqnr, #4
- moveq \stat, \stat, lsr #4
- tst \stat, #3
- addeq \irqnr, \irqnr, #2
- moveq \stat, \stat, lsr #2
- tst \stat, #1
- addeq \irqnr, \irqnr, #1
- moveq \stat, \stat, lsr #1
- tst \stat, #1 @ bit 0 should be set
- .endm
-
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
deleted file mode 100644
index 81f6967683f6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/hardware.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/hardware.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This file contains the hardware definitions of the EBSA-110.
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define ISAMEM_BASE 0xe0000000
-#define ISAIO_BASE 0xf0000000
-
-/*
- * RAM definitions
- */
-#define UNCACHEABLE_ADDR 0xff000000 /* IRQ_STAT */
-
-#endif
-
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
deleted file mode 100644
index ad170886c9aa..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/io.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/io.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * Modifications:
- * 06-Dec-1997 RMK Created.
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-u8 __inb8(unsigned int port);
-void __outb8(u8 val, unsigned int port);
-
-u8 __inb16(unsigned int port);
-void __outb16(u8 val, unsigned int port);
-
-u16 __inw(unsigned int port);
-void __outw(u16 val, unsigned int port);
-
-u32 __inl(unsigned int port);
-void __outl(u32 val, unsigned int port);
-
-u8 __readb(const volatile void __iomem *addr);
-u16 __readw(const volatile void __iomem *addr);
-u32 __readl(const volatile void __iomem *addr);
-
-void __writeb(u8 val, volatile void __iomem *addr);
-void __writew(u16 val, volatile void __iomem *addr);
-void __writel(u32 val, volatile void __iomem *addr);
-
-/*
- * Argh, someone forgot the IOCS16 line. We therefore have to handle
- * the byte stearing by selecting the correct byte IO functions here.
- */
-#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
-#define inb(p) __inb16(p)
-#define outb(v,p) __outb16(v,p)
-#else
-#define inb(p) __inb8(p)
-#define outb(v,p) __outb8(v,p)
-#endif
-
-#define inw(p) __inw(p)
-#define outw(v,p) __outw(v,p)
-
-#define inl(p) __inl(p)
-#define outl(v,p) __outl(v,p)
-
-#define readb(b) __readb(b)
-#define readw(b) __readw(b)
-#define readl(b) __readl(b)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define writeb(v,b) __writeb(v,b)
-#define writew(v,b) __writew(v,b)
-#define writel(v,b) __writel(v,b)
-
-#define insb insb
-extern void insb(unsigned int port, void *buf, int sz);
-#define insw insw
-extern void insw(unsigned int port, void *buf, int sz);
-#define insl insl
-extern void insl(unsigned int port, void *buf, int sz);
-
-#define outsb outsb
-extern void outsb(unsigned int port, const void *buf, int sz);
-#define outsw outsw
-extern void outsw(unsigned int port, const void *buf, int sz);
-#define outsl outsl
-extern void outsl(unsigned int port, const void *buf, int sz);
-
-/* can't support writesb atm */
-#define writesw writesw
-extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
-#define writesl writesl
-extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
-
-/* can't support readsb atm */
-#define readsw readsw
-extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
-
-#define readsl readsl
-extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
deleted file mode 100644
index 29a8671fe849..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/irqs.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/irqs.h
- *
- * Copyright (C) 1996 Russell King
- */
-
-#define NR_IRQS 8
-
-#define IRQ_EBSA110_PRINTER 0
-#define IRQ_EBSA110_COM1 1
-#define IRQ_EBSA110_COM2 2
-#define IRQ_EBSA110_ETHERNET 3
-#define IRQ_EBSA110_TIMER0 4
-#define IRQ_EBSA110_TIMER1 5
-#define IRQ_EBSA110_PCMCIA 6
-#define IRQ_EBSA110_IMMEDIATE 7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
deleted file mode 100644
index f025f405de50..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/memory.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * Changelog:
- * 20-Oct-1996 RMK Created
- * 31-Dec-1997 RMK Fixed definitions to reduce warnings
- * 21-Mar-1999 RMK Renamed to memory.h
- * RMK Moved TASK_SIZE and PAGE_OFFSET here
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Cache flushing area - SRAM
- */
-#define FLUSH_BASE_PHYS 0x40000000
-#define FLUSH_BASE 0xdf000000
-
-#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
deleted file mode 100644
index 3ec12efe98a6..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ebsa110/include/mach/uncompress.h
- *
- * Copyright (C) 1996,1997,1998 Russell King
- */
-
-#include <linux/serial_reg.h>
-
-#define SERIAL_BASE ((unsigned char *)0xf0000be0)
-
-/*
- * This does not append a newline
- */
-static inline void putc(int c)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while (!(v & UART_LSR_THRE));
-
- base[UART_TX << 2] = c;
-}
-
-static inline void flush(void)
-{
- unsigned char v, *base = SERIAL_BASE;
-
- do {
- v = base[UART_LSR << 2];
- barrier();
- } while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
- (UART_LSR_TEMT|UART_LSR_THRE));
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
deleted file mode 100644
index 3c44dd3596ea..000000000000
--- a/arch/arm/mach-ebsa110/io.c
+++ /dev/null
@@ -1,440 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/arm/mach-ebsa110/isamem.c
- *
- * Copyright (C) 2001 Russell King
- *
- * Perform "ISA" memory and IO accesses. The EBSA110 has some "peculiarities"
- * in the way it handles accesses to odd IO ports on 16-bit devices. These
- * devices have their D0-D15 lines connected to the processors D0-D15 lines.
- * Since they expect all byte IO operations to be performed on D0-D7, and the
- * StrongARM expects to transfer the byte to these odd addresses on D8-D15,
- * we must use a trick to get the required behaviour.
- *
- * The trick employed here is to use long word stores to odd address -1. The
- * glue logic picks this up as a "trick" access, and asserts the LSB of the
- * peripherals address bus, thereby accessing the odd IO port. Meanwhile, the
- * StrongARM transfers its data on D0-D7 as expected.
- *
- * Things get more interesting on the pass-1 EBSA110 - the PCMCIA controller
- * wiring was screwed in such a way that it had limited memory space access.
- * Luckily, the work-around for this is not too horrible. See
- * __isamem_convert_addr for the details.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-
-static void __iomem *__isamem_convert_addr(const volatile void __iomem *addr)
-{
- u32 ret, a = (u32 __force) addr;
-
- /*
- * The PCMCIA controller is wired up as follows:
- * +---------+---------+---------+---------+---------+---------+
- * PCMCIA | 2 2 2 2 | 1 1 1 1 | 1 1 1 1 | 1 1 | | |
- * | 3 2 1 0 | 9 8 7 6 | 5 4 3 2 | 1 0 9 8 | 7 6 5 4 | 3 2 1 0 |
- * +---------+---------+---------+---------+---------+---------+
- * CPU | 2 2 2 2 | 2 1 1 1 | 1 1 1 1 | 1 1 1 | | |
- * | 4 3 2 1 | 0 9 9 8 | 7 6 5 4 | 3 2 0 9 | 8 7 6 5 | 4 3 2 x |
- * +---------+---------+---------+---------+---------+---------+
- *
- * This means that we can access PCMCIA regions as follows:
- * 0x*10000 -> 0x*1ffff
- * 0x*70000 -> 0x*7ffff
- * 0x*90000 -> 0x*9ffff
- * 0x*f0000 -> 0x*fffff
- */
- ret = (a & 0xf803fe) << 1;
- ret |= (a & 0x03fc00) << 2;
-
- ret += 0xe8000000;
-
- if ((a & 0x20000) == (a & 0x40000) >> 1)
- return (void __iomem *)ret;
-
- BUG();
- return NULL;
-}
-
-/*
- * read[bwl] and write[bwl]
- */
-u8 __readb(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- return ret;
-}
-
-u16 __readw(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- return __raw_readw(a);
-}
-
-u32 __readl(const volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
- u32 ret;
-
- if ((unsigned long)addr & 3)
- BUG();
-
- ret = __raw_readw(a);
- ret |= __raw_readw(a + 4) << 16;
- return ret;
-}
-
-EXPORT_SYMBOL(__readb);
-EXPORT_SYMBOL(__readw);
-EXPORT_SYMBOL(__readl);
-
-void readsw(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_readsw(a, data, len);
-}
-EXPORT_SYMBOL(readsw);
-
-void readsl(const volatile void __iomem *addr, void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_readsl(a, data, len);
-}
-EXPORT_SYMBOL(readsl);
-
-void __writeb(u8 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
-}
-
-void __writew(u16 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 1)
- BUG();
-
- __raw_writew(val, a);
-}
-
-void __writel(u32 val, volatile void __iomem *addr)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- if ((unsigned long)addr & 3)
- BUG();
-
- __raw_writew(val, a);
- __raw_writew(val >> 16, a + 4);
-}
-
-EXPORT_SYMBOL(__writeb);
-EXPORT_SYMBOL(__writew);
-EXPORT_SYMBOL(__writel);
-
-void writesw(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 1);
-
- __raw_writesw(a, data, len);
-}
-EXPORT_SYMBOL(writesw);
-
-void writesl(volatile void __iomem *addr, const void *data, int len)
-{
- void __iomem *a = __isamem_convert_addr(addr);
-
- BUG_ON((unsigned long)addr & 3);
-
- __raw_writesl(a, data, len);
-}
-EXPORT_SYMBOL(writesl);
-
-/*
- * The EBSA110 has a weird "ISA IO" region:
- *
- * Region 0 (addr = 0xf0000000 + io << 2)
- * --------------------------------------------------------
- * Physical region IO region
- * f0000fe0 - f0000ffc 3f8 - 3ff ttyS0
- * f0000e60 - f0000e64 398 - 399
- * f0000de0 - f0000dfc 378 - 37f lp0
- * f0000be0 - f0000bfc 2f8 - 2ff ttyS1
- *
- * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
- * --------------------------------------------------------
- * Physical region IO region
- * f00014f1 a79 pnp write data
- * f00007c0 - f00007c1 3e0 - 3e1 pcmcia
- * f00004f1 279 pnp address
- * f0000440 - f000046c 220 - 236 eth0
- * f0000405 203 pnp read data
- */
-#define SUPERIO_PORT(p) \
- (((p) >> 3) == (0x3f8 >> 3) || \
- ((p) >> 3) == (0x2f8 >> 3) || \
- ((p) >> 3) == (0x378 >> 3))
-
-/*
- * We're addressing an 8 or 16-bit peripheral which tranfers
- * odd addresses on the low ISA byte lane.
- */
-u8 __inb8(unsigned int port)
-{
- u32 ret;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- ret = __raw_readb((void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- ret = __raw_readl(a);
- else
- ret = __raw_readb(a);
- }
- return ret;
-}
-
-/*
- * We're addressing a 16-bit peripheral which transfers odd
- * addresses on the high ISA byte lane.
- */
-u8 __inb16(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- return __raw_readb((void __iomem *)ISAIO_BASE + offset);
-}
-
-u16 __inw(unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- return __raw_readw((void __iomem *)ISAIO_BASE + offset);
-}
-
-/*
- * Fake a 32-bit read with two 16-bit reads. Needed for 3c589.
- */
-u32 __inl(unsigned int port)
-{
- void __iomem *a;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- return __raw_readw(a) | __raw_readw(a + 4) << 16;
-}
-
-EXPORT_SYMBOL(__inb8);
-EXPORT_SYMBOL(__inb16);
-EXPORT_SYMBOL(__inw);
-EXPORT_SYMBOL(__inl);
-
-void __outb8(u8 val, unsigned int port)
-{
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + (port << 2));
- else {
- void __iomem *a = (void __iomem *)ISAIO_BASE + ((port & ~1) << 1);
-
- /*
- * Shame nothing else does
- */
- if (port & 1)
- __raw_writel(val, a);
- else
- __raw_writeb(val, a);
- }
-}
-
-void __outb16(u8 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else
- offset = (port & ~1) << 1 | (port & 1);
-
- __raw_writeb(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outw(u16 val, unsigned int port)
-{
- unsigned int offset;
-
- /*
- * The SuperIO registers use sane addressing techniques...
- */
- if (SUPERIO_PORT(port))
- offset = port << 2;
- else {
- offset = port << 1;
- BUG_ON(port & 1);
- }
- __raw_writew(val, (void __iomem *)ISAIO_BASE + offset);
-}
-
-void __outl(u32 val, unsigned int port)
-{
- BUG();
-}
-
-EXPORT_SYMBOL(__outb8);
-EXPORT_SYMBOL(__outb16);
-EXPORT_SYMBOL(__outw);
-EXPORT_SYMBOL(__outl);
-
-void outsb(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insb(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsb((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insb);
-
-void outsw(unsigned int port, const void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-void insw(unsigned int port, void *from, int len)
-{
- u32 off;
-
- if (SUPERIO_PORT(port))
- off = port << 2;
- else {
- off = (port & ~1) << 1;
- if (port & 1)
- BUG();
- }
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len);
-}
-
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insw);
-
-/*
- * We implement these as 16-bit insw/outsw, mainly for
- * 3c589 cards.
- */
-void outsl(unsigned int port, const void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_writesw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-void insl(unsigned int port, void *from, int len)
-{
- u32 off = port << 1;
-
- if (SUPERIO_PORT(port) || port & 3)
- BUG();
-
- __raw_readsw((void __iomem *)ISAIO_BASE + off, from, len << 1);
-}
-
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insl);
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
deleted file mode 100644
index fd1474b66d31..000000000000
--- a/arch/arm/mach-ebsa110/leds.c
+++ /dev/null
@@ -1,71 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for the LED found on the EBSA110 machine
- * Based on Versatile and RealView machine LED code
- *
- * Author: Bryan Wu <bryan.wu at canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-
-#include "core.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-static void ebsa110_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- if (b != LED_OFF)
- reg |= 0x80;
- else
- reg &= ~0x80;
-
- __raw_writeb(reg, SOFT_BASE);
-}
-
-static enum led_brightness ebsa110_led_get(struct led_classdev *cdev)
-{
- u8 reg = __raw_readb(SOFT_BASE);
-
- return (reg & 0x80) ? LED_FULL : LED_OFF;
-}
-
-static int __init ebsa110_leds_init(void)
-{
-
- struct led_classdev *cdev;
- int ret;
-
- if (!machine_is_ebsa110())
- return -ENODEV;
-
- cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
- if (!cdev)
- return -ENOMEM;
-
- cdev->name = "ebsa110:0";
- cdev->brightness_set = ebsa110_led_set;
- cdev->brightness_get = ebsa110_led_get;
- cdev->default_trigger = "heartbeat";
-
- ret = led_classdev_register(NULL, cdev);
- if (ret < 0) {
- kfree(cdev);
- return ret;
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(ebsa110_leds_init);
-#endif
--
2.27.0
More information about the linux-arm-kernel
mailing list