[PATCH 1/5] Documentation: bindings: clk: Add bindings for i.MX8MM BLK_CTL

[Adam Ford]

On Wed, Oct 7, 2020 at 3:03 PM Marek Vasut <marex at denx.de> wrote:
>
> On 10/7/20 9:52 PM, Adam Ford wrote:
> > On Sun, Oct 4, 2020 at 12:53 AM Marek Vasut <marex at denx.de> wrote:
> >>
> >> Add the i.MX8MM BLK_CTL compatible string to the list.
> [...]
> >> ---
> >>  Documentation/devicetree/bindings/clock/fsl,imx-blk-ctl.yaml | 1 +
> >>  1 file changed, 1 insertion(+)
> >>
> >
> > Is there a DTSI change part of this patch?  I was going to try to test
> > it, but  I am not seeing a change to the imx8mm.dtsi, and I am not
> > sure where to put the node.
>
> There are in fact quite a few other pieces you need to have in place,
> this patchset in itself is not particularly useful, it is just infra for
> the LCDIF and MIPI DSIM block control. You might want to wait until they
> all land in next and test that result.

I have several patches in place, the GPCv2, this block driver,
enabling GPU DT node, I'm also working on the DSIM patch you posted.
I was hoping to test them all together and reply to the various
threads with tested-by.  I also want to get my device tree stuff ready
on the beacon boards so when everything lands, I can post DTS updates
to enable the LCDIF, DSI, and the HDMI bridge.

If you have a repo somewhere that has all these combined, I can just
work on the final layer to enable the device tree plumbing on my
board.  I just need the imx8mm.dtsi changes for this, DSIM, and the
LCDIF so I can finish the task.

adam