[PATCH v3 4/7] drivers: leds: Add the iEi WT61P803 PUZZLE LED driver

[Luka Kovacic]

On Tue, Oct 6, 2020 at 8:41 AM Luka Kovacic <luka.kovacic at sartura.hr> wrote:
>
> On Wed, Sep 30, 2020 at 9:48 PM Pavel Machek <pavel at ucw.cz> wrote:
> >
> > Hi!
> >
> > > +static int iei_wt61p803_puzzle_led_brightness_set_blocking(struct led_classdev *cdev,
> > > +             enum led_brightness brightness)
> > > +{
> > > +     struct iei_wt61p803_puzzle_led *priv = cdev_to_iei_wt61p803_puzzle_led(cdev);
> > > +     unsigned char *resp_buf = priv->response_buffer;
> > > +     unsigned char led_power_cmd[5] = {
> > > +             IEI_WT61P803_PUZZLE_CMD_HEADER_START,
> > > +             IEI_WT61P803_PUZZLE_CMD_LED,
> > > +             IEI_WT61P803_PUZZLE_CMD_LED_POWER,
> > > +             (char)IEI_LED_OFF
> > > +     };
> > > +     size_t reply_size;
> > > +
> > > +     mutex_lock(&priv->lock);
> > > +     if (brightness == LED_OFF) {
> > > +             led_power_cmd[3] = (char)IEI_LED_OFF;
> > > +             priv->led_power_state = LED_OFF;
> > > +     } else {
> > > +             led_power_cmd[3] = (char)IEI_LED_ON;
> > > +             priv->led_power_state = LED_ON;
> > > +     }
> > > +     mutex_unlock(&priv->lock);
> > > +
> > > +     return iei_wt61p803_puzzle_write_command(priv->mcu, led_power_cmd,
> > > +                     sizeof(led_power_cmd), resp_buf, &reply_size);
> > > +}
> >
> > Is the mutex needed? If so, should it include the
> > iei_wt61p803_puzzle_write_command()? Does
> > iei_wt61p803_puzzle_write_command() have internal locking to prevent
> > two messages from being mingled?
> >
> > Best regards,
> >                                                                         Pavel
> >
> > --
> > (english) http://www.livejournal.com/~pavelmachek
> > (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>
> Hello Pavel,
>
> The mutex isn't needed and can be removed.
> The function iei_wt61p803_puzzle_write_command() already handles its own
> mutex locking, so a separate mutex isn't required.
>
> Does brightness_set_blocking only block a single caller (each caller separately)
> or does it block all callers until the previous caller is finished?
>
> Kind regards,
> Luka

Hello Pavel,

I've sent out a new patchset, but I kept the mutex in use.
It's used to make sure only one read or write request is done at once,
when writing
to the LED driver private structure.

I have also added this description to the struct comment.

Kind regards,
Luka