[PATCH 1/3] drm/exynos: Init the DSIM PHY in samsung_dsim_enable()

[Marek Vasut]

In case the PHY is not initialized, do it in samsung_dsim_enable(),
otherwise the link configuration registers are not programmed at all.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Guido Günther <agx at sigxcpu.org>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
Cc: Lucas Stach <l.stach at pengutronix.de>
Cc: Marek Szyprowski <m.szyprowski at samsung.com>
Cc: Michael Tretter <m.tretter at pengutronix.de>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-samsung-soc at vger.kernel.org
To: dri-devel at lists.freedesktop.org
--
NOTE: This depends on https://patchwork.kernel.org/project/dri-devel/list/?series=347439
---
 drivers/gpu/drm/bridge/samsung-dsim.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/bridge/samsung-dsim.c b/drivers/gpu/drm/bridge/samsung-dsim.c
index 6d2d8dc027de..fbd87a74eb9f 100644
--- a/drivers/gpu/drm/bridge/samsung-dsim.c
+++ b/drivers/gpu/drm/bridge/samsung-dsim.c
@@ -1244,6 +1244,13 @@ static void samsung_dsim_enable(struct samsung_dsim *dsi)
 	pm_runtime_get_sync(dsi->dev);
 	dsi->state |= DSIM_STATE_ENABLED;
 
+	if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
+		ret = samsung_dsim_init(dsi);
+		if (ret)
+			return;
+		dsi->state |= DSIM_STATE_INITIALIZED;
+	}
+
 	if (dsi->panel) {
 		ret = drm_panel_prepare(dsi->panel);
 		if (ret < 0)
-- 
2.28.0