[PATCH 1/6] efistub: pass uefi secureboot flag via fdt params

[Chester Lin]

On Mon, Sep 14, 2020 at 04:05:22PM +0800, Chester Lin wrote:
> Hi Ard,
> 
> On Fri, Sep 11, 2020 at 06:01:09PM +0300, Ard Biesheuvel wrote:
> > On Fri, 4 Sep 2020 at 10:29, Chester Lin <clin at suse.com> wrote:
> > >
> > > Add a new UEFI parameter: "linux,uefi-secure-boot" in fdt boot params
> > > as other architectures have done in their own boot data. For example,
> > > the boot_params->secure_boot in x86.
> > >
> > > Signed-off-by: Chester Lin <clin at suse.com>
> > 
> > Why do we need this flag? Can't the OS simply check the variable directly?
> > 
> 
> In fact, there's a difficulty to achieve this.
> 
> When linux kernel is booting on ARM, the runtime services are enabled later on.
> It's done by arm_enable_runtime_services(), which is registered as an early_initcall.
> Before it calls efi_native_runtime_setup(), all EFI runtime callbacks are still
> NULL so calling efi.get_variable() will cause NULL pointer dereference.
> 
> There's a case that arch_ima_get_secureboot() can be called in early boot stage.
> For example, when you try to set "ima_appraise=off" in kernel command line, it's
> actually handled early:
> 
> [    0.000000] Kernel command line: BOOT_IMAGE=/boot/Image-5.9.0-rc3-9.gdd61cda-
> vanilla root=UUID=a88bfb80-8abb-425c-a0f3-ad317465c28b splash=silent mitigations
> =auto ignore_loglevel earlycon=pl011,mmio,0x9000000 console=ttyAMA0 ima_appraise=off
> [    0.000000] ima: Secure boot enabled: ignoring ima_appraise=off boot parameter option
> [    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
> 
> However EFI services are remapped and enabled afterwards.
> 
> [    0.082286] rcu: Hierarchical SRCU implementation.
> [    0.089592] Remapping and enabling EFI services.
> [    0.097509] smp: Bringing up secondary CPUs ...
> 
> Another problem is that efi_rts_wq is created in subsys_initcall so we have to
> wait for both EFI services mapping and the workqueue get initiated before calling
> efi.get_variable() on ARM.
> 
> The only way I can think of is to put a flag via fdt params. May I have your
> suggestions? I will appreciate if there's any better approach.
> 
> Thanks,
> Chester

Ping. May I have some suggestions here?

Thanks,
Chester

> 
> > > ---
> > >  drivers/firmware/efi/libstub/fdt.c | 39 +++++++++++++++++++++++++++++-
> > >  1 file changed, 38 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/firmware/efi/libstub/fdt.c b/drivers/firmware/efi/libstub/fdt.c
> > > index 11ecf3c4640e..c9a341e4715f 100644
> > > --- a/drivers/firmware/efi/libstub/fdt.c
> > > +++ b/drivers/firmware/efi/libstub/fdt.c
> > > @@ -136,6 +136,10 @@ static efi_status_t update_fdt(void *orig_fdt, unsigned long orig_fdt_size,
> > >         if (status)
> > >                 goto fdt_set_fail;
> > >
> > > +       status = fdt_setprop_var(fdt, node, "linux,uefi-secure-boot", fdt_val32);
> > > +       if (status)
> > > +               goto fdt_set_fail;
> > > +
> > >         if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
> > >                 efi_status_t efi_status;
> > >
> > > @@ -199,6 +203,24 @@ static efi_status_t update_fdt_memmap(void *fdt, struct efi_boot_memmap *map)
> > >         return EFI_SUCCESS;
> > >  }
> > >
> > > +static efi_status_t update_fdt_secboot(void *fdt, u32 secboot)
> > > +{
> > > +       int node = fdt_path_offset(fdt, "/chosen");
> > > +       u32 fdt_val32;
> > > +       int err;
> > > +
> > > +       if (node < 0)
> > > +               return EFI_LOAD_ERROR;
> > > +
> > > +       fdt_val32 = cpu_to_fdt32(secboot);
> > > +
> > > +       err = fdt_setprop_inplace_var(fdt, node, "linux,uefi-secure-boot", fdt_val32);
> > > +       if (err)
> > > +               return EFI_LOAD_ERROR;
> > > +
> > > +       return EFI_SUCCESS;
> > > +}
> > > +
> > >  struct exit_boot_struct {
> > >         efi_memory_desc_t       *runtime_map;
> > >         int                     *runtime_entry_count;
> > > @@ -208,6 +230,9 @@ struct exit_boot_struct {
> > >  static efi_status_t exit_boot_func(struct efi_boot_memmap *map,
> > >                                    void *priv)
> > >  {
> > > +       efi_status_t status;
> > > +       enum efi_secureboot_mode secboot_status;
> > > +       u32 secboot_var = 0;
> > >         struct exit_boot_struct *p = priv;
> > >         /*
> > >          * Update the memory map with virtual addresses. The function will also
> > > @@ -217,7 +242,19 @@ static efi_status_t exit_boot_func(struct efi_boot_memmap *map,
> > >         efi_get_virtmap(*map->map, *map->map_size, *map->desc_size,
> > >                         p->runtime_map, p->runtime_entry_count);
> > >
> > > -       return update_fdt_memmap(p->new_fdt_addr, map);
> > > +       status = update_fdt_memmap(p->new_fdt_addr, map);
> > > +
> > > +       if (status != EFI_SUCCESS)
> > > +               return status;
> > > +
> > > +       secboot_status = efi_get_secureboot();
> > > +
> > > +       if (secboot_status == efi_secureboot_mode_enabled)
> > > +               secboot_var = 1;
> > > +
> > > +       status = update_fdt_secboot(p->new_fdt_addr, secboot_var);
> > > +
> > > +       return status;
> > >  }
> > >
> > >  #ifndef MAX_FDT_SIZE
> > > --
> > > 2.26.1
> > >
> >