[PATCH v4 1/4] dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings

[Krzysztof Kozlowski]

On Fri, 2 Oct 2020 at 18:35, Li Jun <jun.li at nxp.com> wrote:
>
> NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic
> to support low power mode, the glue layer is for this wakeup
> functionality, which has a separated interrupt, can support
> wakeup from U3 and connect events for host, and vbus wakeup for
> device.
>
> Signed-off-by: Li Jun <jun.li at nxp.com>
> ---
>  .../devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml   | 106 +++++++++++++++++++++
>  1 file changed, 106 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
> new file mode 100644
> index 0000000..c16c94c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
> @@ -0,0 +1,106 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (c) 2020 NXP
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP iMX8MP Soc USB Controller
> +
> +maintainers:
> +  - Li Jun <jun.li at nxp.com>
> +
> +properties:
> +  compatible:
> +    items:
> +    - const: fsl,imx8mp-dwc3

The same comment as for v3.

Best regards,
Krzysztof