[linux-sunxi] Re: [PATCH 0/7] Pine64 PineCube support

[Clément Péron]

> On Fri, 25 Sep 2020 at 17:12, Maxime Ripard <maxime at cerno.tech> wrote:
> >
> > Hi,
> >
> > On Wed, Sep 23, 2020 at 08:57:02AM +0800, Icenowy Zheng wrote:
> > > Pine64 PineCube is an IP camera based on Allwinner S3 chip.
> > >
> > > This patchset tries to add support for it.
> > >
> > > In order to make sure the system do not hang when camera is brought up,
> > > a fix to AXP209 driver is needed (sent individually), otherwise the
> > > system will hang because it changes the voltage of LDO2 when LDO4
> > > tweaking.
> >
> > Queued all the patches for 5.11

I was on top of sunxi sunxi/for-next branch

Maybe I'm missing some dt-bindings merged in another tree.

Sorry if it's a false warning.

Regards,
Clement

> >
> > > Icenowy Zheng (7):
> > >   ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
> > >   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
> > >   ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
> > >   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
> > >   ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
> > >   dt-bindings: arm: sunxi: add Pine64 PineCube binding
> > >   ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
> >
> > However, I guess for the next patches to the v3s DTSI we should just
> > have a simpler prefix (like v3), it's really taking a lot of characters
> > here :)
> >
> > Maxime
> >
> > --
> > You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
> > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200925151241.kfmytlff4grswtzh%40gilmour.lan.