[PATCH v2 2/3] firmware: Keem Bay: Add support for Arm Trusted Firmware Service call

[Sudeep Holla]

On Fri, Oct 02, 2020 at 10:22:46AM +0000, Zulkifli, Muhammad Husaini wrote:
> Hi Sudeep,
> 
> >-----Original Message-----
> >From: Michal Simek <michal.simek at xilinx.com>
> >Sent: Friday, October 2, 2020 4:23 PM
> >To: Sudeep Holla <sudeep.holla at arm.com>; Zulkifli, Muhammad Husaini
> ><muhammad.husaini.zulkifli at intel.com>
> >Cc: Hunter, Adrian <adrian.hunter at intel.com>; michal.simek at xilinx.com;
> >ulf.hansson at linaro.org; linux-mmc at vger.kernel.org; linux-arm-
> >kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Raja Subramanian,
> >Lakshmi Bai <lakshmi.bai.raja.subramanian at intel.com>; arnd at arndb.de; Wan
> >Mohamad, Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad at intel.com>
> >Subject: Re: [PATCH v2 2/3] firmware: Keem Bay: Add support for Arm Trusted
> >Firmware Service call
> >
> >Hi Sudeep,
> >
> >On 01. 10. 20 17:35, Sudeep Holla wrote:
> >> On Thu, Oct 01, 2020 at 10:21:48PM +0800,
> >muhammad.husaini.zulkifli at intel.com wrote:
> >>> From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli at intel.com>
> >>>
> >>> Add generic firmware driver for Keem Bay SOC to support Arm Trusted
> >>> Firmware Services call.
> >>>
> >>> Signed-off-by: Muhammad Husaini Zulkifli
> >>> <muhammad.husaini.zulkifli at intel.com>
> >>> ---
> >>>  drivers/firmware/Kconfig                   |   1 +
> >>>  drivers/firmware/Makefile                  |   1 +
> >>>  drivers/firmware/intel/Kconfig             |  14 +++
> >>>  drivers/firmware/intel/Makefile            |   4 +
> >>>  drivers/firmware/intel/keembay_smc.c       | 119 +++++++++++++++++++++
> >>>  include/linux/firmware/intel/keembay_smc.h |  27 +++++
> >>>  6 files changed, 166 insertions(+)
> >>>  create mode 100644 drivers/firmware/intel/Kconfig  create mode
> >>> 100644 drivers/firmware/intel/Makefile  create mode 100644
> >>> drivers/firmware/intel/keembay_smc.c
> >>>  create mode 100644 include/linux/firmware/intel/keembay_smc.h
> >>>
> >>> diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
> >>> index fbd785dd0513..41de77d2720e 100644
> >>> --- a/drivers/firmware/Kconfig
> >>> +++ b/drivers/firmware/Kconfig
> >>> @@ -305,5 +305,6 @@ source "drivers/firmware/psci/Kconfig"
> >>>  source "drivers/firmware/smccc/Kconfig"
> >>>  source "drivers/firmware/tegra/Kconfig"
> >>>  source "drivers/firmware/xilinx/Kconfig"
> >>> +source "drivers/firmware/intel/Kconfig"
> >>>
> >>>  endmenu
> >>> diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
> >>> index 99510be9f5ed..00f295ab9860 100644
> >>> --- a/drivers/firmware/Makefile
> >>> +++ b/drivers/firmware/Makefile
> >>> @@ -33,3 +33,4 @@ obj-y				+= psci/
> >>>  obj-y				+= smccc/
> >>>  obj-y				+= tegra/
> >>>  obj-y				+= xilinx/
> >>> +obj-y				+= intel/
> >>> diff --git a/drivers/firmware/intel/Kconfig
> >>> b/drivers/firmware/intel/Kconfig new file mode 100644 index
> >>> 000000000000..b2b7a4e5410b
> >>> --- /dev/null
> >>> +++ b/drivers/firmware/intel/Kconfig
> >>> @@ -0,0 +1,14 @@
> >>> +# SPDX-License-Identifier: GPL-2.0-only menu "Intel Firmware
> >>> +Drivers"
> >>> +
> >>> +config KEEMBAY_FIRMWARE
> >>> +	bool "Enable Keem Bay firmware interface support"
> >>> +	depends on HAVE_ARM_SMCCC
> >>
> >> What is the version of SMCCC implemented ?
> Our current Arm Trusted Firmware framework supports v1.1.
> Does it mean I should use HAVE_ARM_SMCCC_DISCOVERY?

Yes, HAVE_ARM_SMCCC_DISCOVERY is right dependency and allows you to
get smccc version via arm_smccc_get_version which may be useful in
future.

> Not really clear about this. As for HAVE_ARM_SMCCC will include 
> support for the SMC and HVC.
>

Yes, but for sake of correctness I prefer HAVE_ARM_SMCCC_DISCOVERY.

-- 
Regards,
Sudeep