[PATCH v6 6/7] arm64: dts: meson: Fix schema warnings for pwm-leds

[Neil Armstrong]

On 01/10/2020 01:46, Alexander Dahl wrote:
> The node names for devices using the pwm-leds driver follow a certain
> naming scheme (now).
> 
> Signed-off-by: Alexander Dahl <post at lespocky.de>
> ---
> 
> Notes:
>     v6:
>       * added this patch to series
> 
>  .../arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 4 ++--
>  arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts     | 4 ++--
>  arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts          | 8 ++++----
>  3 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> index 8bcdffdf55d0..adfc72500e66 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
> @@ -42,10 +42,10 @@
>  		};
>  	};
>  
> -	pwmleds {
> +	led-controller {
>  		compatible = "pwm-leds";
>  
> -		power {
> +		led-1 {
>  			label = "vim:red:power";
>  			pwms = <&pwm_AO_ab 1 7812500 0>;
>  			max-brightness = <255>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> index bff8ec2c1c70..dcb435af4e0b 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
> @@ -81,10 +81,10 @@
>  		};
>  	};
>  
> -	pwmleds {
> +	led-controller {
>  		compatible = "pwm-leds";
>  
> -		power {
> +		led-1 {
>  			label = "vim:red:power";
>  			pwms = <&pwm_AO_ab 1 7812500 0>;
>  			max-brightness = <255>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 5ab139a34c01..039a8d0d1e9b 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -101,20 +101,20 @@
>  		};
>  	};
>  
> -	leds {
> +	led-controller-1 {
>  		compatible = "gpio-leds";
>  
> -		led-bluetooth {
> +		led-1 {
>  			label = "sei610:blue:bt";
>  			gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
>  			default-state = "off";
>  		};
>  	};
>  
> -	pwmleds {
> +	led-controller-2 {
>  		compatible = "pwm-leds";
>  
> -		power {
> +		led-2 {
>  			label = "sei610:red:power";
>  			pwms = <&pwm_AO_ab 0 30518 0>;
>  			max-brightness = <255>;
> 

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>