[PATCH 4/8] arm64: dts: ti: k3-j721e-main: Add output tap delay values

[Faiz Abbas]

Add output tap delay values as given in the latest Data Manual[1].

[1] https://www.ti.com/lit/gpn/tda4vm

Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..630b195cbc8a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1081,7 +1081,11 @@
 		bus-width = <8>;
 		mmc-hs400-1_8v;
 		mmc-ddr-1_8v;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0xf>;
+		ti,otap-del-sel-mmc-hs = <0xf>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x6>;
+		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		ti,strobe-sel = <0x77>;
 		dma-coherent;
@@ -1096,7 +1100,12 @@
 		clocks = <&k3_clks 92 0>, <&k3_clks 92 5>;
 		assigned-clocks = <&k3_clks 92 0>;
 		assigned-clock-parents = <&k3_clks 92 1>;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
@@ -1112,7 +1121,12 @@
 		clocks = <&k3_clks 93 0>, <&k3_clks 93 5>;
 		assigned-clocks = <&k3_clks 93 0>;
 		assigned-clock-parents = <&k3_clks 93 1>;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0xc>;
 		ti,trm-icp = <0x8>;
 		ti,clkbuf-sel = <0x7>;
 		dma-coherent;
-- 
2.17.1