[PATCH v2 0/3] arm64: dts: add FlexCAN support to LS1028A and sl28

[Michael Walle]

Now that FlexCAN support for newer IPs is finally hitting upstream [1],
lets add the corresponding nodes for the LS1028A SoC and enable it for the
Kontron sl28 board.

changes since v1:
 - added new patch "dt-bindings: can: flexcan: list supported processors"
   Suggested by Lee.

   Please keep in mind that this only an intermediate step, as Marc already
   pointed out [2] that Oleksij is alreay working on converting the
   bindings to YAML format.

[1] https://lore.kernel.org/netdev/20200923085418.2685858-1-mkl@pengutronix.de/
[2] https://lore.kernel.org/linux-can/790ce102-7542-b65e-0945-a04faf6e4b89@pengutronix.de/

Michael Walle (3):
  dt-bindings: can: flexcan: list supported processors
  arm64: dts: ls1028a: add missing CAN nodes
  arm64: dts: freescale: sl28: add CAN node

 .../bindings/net/can/fsl-flexcan.txt           |  6 ++++++
 .../dts/freescale/fsl-ls1028a-kontron-sl28.dts |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 ++++++++++++++++++
 3 files changed, 28 insertions(+)

-- 
2.20.1