[PATCH 10/11] arm64: dts: imx8mm: add GPC node and power domains

[Krzysztof Kozlowski]

On Wed, Sep 30, 2020 at 05:50:05PM +0200, Lucas Stach wrote:
> This adds the DT nodes to describe the power domains available on the
> i.MX8MM. Things are a bit more complex compared to other GPCv2 power
> domain setups, as there is now a hierarchy of domains where complete
> subsystems (HSIO, GPU, DISPLAY) can be gated as a whole, but also
> fine granular gating within those subsystems is possible.
> 
> Note that this is still incomplete, as both VPU and DISP domains are
> missing their reset clocks. Those aren't directly sourced from the CCM,
> but have another level of clock gating in the BLKCTL of those domains,
> which needs a separate driver.
> 
> Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 57 +++++++++++++++++++++++
>  1 file changed, 57 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> index 76f040e4be5e..a841fb2d0458 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
> @@ -4,6 +4,8 @@
>   */
>  
>  #include <dt-bindings/clock/imx8mm-clock.h>
> +#include <dt-bindings/power/imx8mm-power.h>
> +#include <dt-bindings/reset/imx8mq-reset.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -547,6 +549,61 @@
>  				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
>  				#reset-cells = <1>;
>  			};
> +
> +			gpc: gpc at 303a0000 {
> +				compatible = "fsl,imx8mm-gpc";
> +				reg = <0x303a0000 0x10000>;
> +				interrupt-parent = <&gic>;
> +				interrupt-controller;

This does not validate against your GPC dtschema. Please add DTS which
passes own schema from day one (except existing issues).

Best regards,
Krzysztof