[PATCH v6 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID
Alice Guo (OSS)
alice.guo at oss.nxp.com
Mon Nov 30 22:31:16 EST 2020
> -----Original Message-----
> From: linux-arm-kernel <linux-arm-kernel-bounces at lists.infradead.org> On
> Behalf Of Rob Herring
> Sent: 2020年12月1日 5:57
> To: Alice Guo <alice.guo at nxp.com>
> Cc: devicetree at vger.kernel.org; Peng Fan <peng.fan at nxp.com>;
> s.hauer at pengutronix.de; linux-kernel at vger.kernel.org; krzk at kernel.org;
> dl-linux-imx <linux-imx at nxp.com>; shawnguo at kernel.org;
> linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH v6 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc
> unique ID
>
> On Tue, Nov 24, 2020 at 09:59:46AM +0800, Alice Guo wrote:
> > Add DT Binding doc for the Unique ID of i.MX 8M series.
> >
> > Signed-off-by: Alice Guo <alice.guo at nxp.com>
> > ---
> >
> > v2: remove the subject prefix "LF-2571-1"
> > v3: put it into Documentation/devicetree/bindings/arm/fsl.yaml
>
> No, I prefer this be a separate schema file and not clutter board/soc schemas
> with child nodes.
Hi,
Thank you for your comments. I read "Documentation/devicetree/bindings/arm/arm,realview.yaml"
in which there is a "soc". So I added my "soc" to this current file. Can I keep it in Documentation/devicetree/bindings/arm/fsl.yaml?
> > modify the description of nvmem-cells
> > use "make ARCH=arm64 dtbs_check" to test it and fix errors
> > v4: use allOf to limit new version DTS files for i.MX8M to include
> > "fsl,imx8mm/n/p/q-soc", nvmem-cells and nvmem-cells-names
> > v5: correct the error of using allOf
> > v6: none
> >
> > .../devicetree/bindings/arm/fsl.yaml | 47
> +++++++++++++++++++
> > 1 file changed, 47 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml
> > b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 67980dcef66d..7132ffd41abb 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -918,6 +918,53 @@ properties:
> > - fsl,s32v234-evb # S32V234-EVB2 Customer
> Evaluation Board
> > - const: fsl,s32v234
> >
> > + soc:
> > + type: object
> > + properties:
> > + compatible:
> > + oneOf:
> > + - description: new version compatible for i.MX8M SoCs
> > + items:
> > + - enum:
> > + - fsl,imx8mm-soc
> > + - fsl,imx8mn-soc
> > + - fsl,imx8mp-soc
> > + - fsl,imx8mq-soc
> > + - const: simple-bus
> > +
> > + - description: old version compatible for i.MX8M SoCs
> > + items:
> > + - const: simple-bus
>
> Fix your dts files and drop this.
My changes are below.
>
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + enum:
> > + - fsl,imx8mm
> > + - fsl,imx8mn
> > + - fsl,imx8mp
> > + - fsl,imx8mq
> > +
> > + then:
> > + patternProperties:
> > + "^soc@[0-9a-f]+$":
>
> And this is just wrong. First you say the node is 'soc' and then here it has a unit
> address.
Here are my changes. I deleted the section from "soc:" to "- const: simple bus". Please help me to see if they are correct and workable. Thank you.
allOf:
- if:
properties:
compatible:
contains:
enum:
- fsl,imx8mm
- fsl,imx8mn
- fsl,imx8mp
- fsl,imx8mq
then:
patternProperties:
"^soc@[0-9a-f]+$":
properties:
compatible:
items:
- enum:
- fsl,imx8mm-soc
- fsl,imx8mn-soc
- fsl,imx8mp-soc
- fsl,imx8mq-soc
- const: simple-bus
required:
- compatible
- nvmem-cells
- nvmem-cell-names
Best Regards,
Alice Guo
>
> > + properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - fsl,imx8mm-soc
> > + - fsl,imx8mn-soc
> > + - fsl,imx8mp-soc
> > + - fsl,imx8mq-soc
> > + - const: simple-bus
> > +
> > + required:
> > + - compatible
> > + - nvmem-cells
> > + - nvmem-cell-names
> > +
> > additionalProperties: true
> >
> > ...
> > --
> > 2.17.1
> >
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list