[PATCH 2/2] PCI: brcmstb: support BCM4908 with external PERST# signal controller

Rafał Miłecki zajec5 at gmail.com
Thu Nov 26 08:59:39 EST 2020


From: Rafał Miłecki <rafal at milecki.pl>

BCM4908 uses external MISC block for controlling PERST# signal. Use it
as a reset controller.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
 drivers/pci/controller/Kconfig        |  2 +-
 drivers/pci/controller/pcie-brcmstb.c | 33 +++++++++++++++++++++++++--
 2 files changed, 32 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 64e2f5e379aa..d44c70bb88f6 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -273,7 +273,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM4908 || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	default ARCH_BRCMSTB
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 9c3d2982248d..10023da323d5 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -96,6 +96,7 @@
 
 #define PCIE_MISC_REVISION				0x406c
 #define  BRCM_PCIE_HW_REV_33				0x0303
+#define  BRCM_PCIE_HW_REV_3_20				0x0320
 
 #define PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT		0x4070
 #define  PCIE_MISC_CPU_2_PCIE_MEM_WIN0_BASE_LIMIT_LIMIT_MASK	0xfff00000
@@ -190,6 +191,7 @@
 struct brcm_pcie;
 static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_bridge_sw_init_set_generic(struct brcm_pcie *pcie, u32 val);
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val);
 static inline void brcm_pcie_perst_set_generic(struct brcm_pcie *pcie, u32 val);
 
@@ -205,6 +207,7 @@ enum {
 };
 
 enum pcie_type {
+	BCM4908,
 	GENERIC,
 	BCM7278,
 	BCM2711,
@@ -230,6 +233,13 @@ static const struct pcie_cfg_data generic_cfg = {
 	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
 };
 
+static const struct pcie_cfg_data bcm4908_cfg = {
+	.offsets	= pcie_offsets,
+	.type		= BCM4908,
+	.perst_set	= brcm_pcie_perst_set_4908,
+	.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
+};
+
 static const int pcie_offset_bcm7278[] = {
 	[RGR1_SW_INIT_1] = 0xc010,
 	[EXT_CFG_INDEX] = 0x9000,
@@ -282,6 +292,7 @@ struct brcm_pcie {
 	const int		*reg_offsets;
 	enum pcie_type		type;
 	struct reset_control	*rescal;
+	struct reset_control	*perst_reset;
 	int			num_memc;
 	u64			memc_size[PCIE_BRCM_MAX_MEMC];
 	u32			hw_rev;
@@ -747,6 +758,18 @@ static inline void brcm_pcie_bridge_sw_init_set_7278(struct brcm_pcie *pcie, u32
 	writel(tmp, pcie->base + PCIE_RGR1_SW_INIT_1(pcie));
 }
 
+static inline void brcm_pcie_perst_set_4908(struct brcm_pcie *pcie, u32 val)
+{
+	if (WARN_ONCE(!pcie->perst_reset, "missing PERST# reset controller\n") ||
+	    WARN_ONCE(pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20, "unsupported hardware revision\n"))
+		return;
+
+	if (val)
+		reset_control_assert(pcie->perst_reset);
+	else
+		reset_control_deassert(pcie->perst_reset);
+}
+
 static inline void brcm_pcie_perst_set_7278(struct brcm_pcie *pcie, u32 val)
 {
 	u32 tmp;
@@ -1206,6 +1229,7 @@ static int brcm_pcie_remove(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg },
+	{ .compatible = "brcm,bcm4908-pcie", .data = &bcm4908_cfg },
 	{ .compatible = "brcm,bcm7211-pcie", .data = &generic_cfg },
 	{ .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg },
 	{ .compatible = "brcm,bcm7216-pcie", .data = &bcm7278_cfg },
@@ -1262,11 +1286,18 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 		clk_disable_unprepare(pcie->clk);
 		return PTR_ERR(pcie->rescal);
 	}
+	pcie->perst_reset = devm_reset_control_get_optional_shared(&pdev->dev, "perst");
+	if (IS_ERR(pcie->perst_reset)) {
+		clk_disable_unprepare(pcie->clk);
+		return PTR_ERR(pcie->perst_reset);
+	}
 
 	ret = reset_control_deassert(pcie->rescal);
 	if (ret)
 		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
 
+	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
+
 	ret = brcm_phy_start(pcie);
 	if (ret) {
 		reset_control_assert(pcie->rescal);
@@ -1278,8 +1309,6 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail;
 
-	pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
-
 	msi_np = of_parse_phandle(pcie->np, "msi-parent", 0);
 	if (pci_msi_enabled() && msi_np == pcie->np) {
 		ret = brcm_pcie_enable_msi(pcie);
-- 
2.26.2




More information about the linux-arm-kernel mailing list