[PATCH 2/2] arm64: dts: imx8mm-beacon-som: Fix PMIC clock error

[Adam Ford]

The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.

Fixes:  acb01032e11a ("arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC")

Signed-off-by: Adam Ford <aford173 at gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 9bdefbba9e90..d897913537ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -111,6 +111,10 @@ pmic at 4b {
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
 		regulators {
 			buck1_reg: BUCK1 {
 				regulator-name = "buck1";
-- 
2.25.1