[PATCH v2 0/6] arm/arm64: Allow the rescheduling IPI to bypass irq_enter/exit

[Marc Zyngier]

This is the second version of my earlier series [1], which aims at
fixing (or papering over, depending on how you look at things) a
performance regression seen on arm64 for reched IPI heavy workloads
(such as "perf bench sched pipe").

As eloquently described by Thomas in his earlier replies [2], the
current situation is less than ideal on most architecture except x86,
and my conclusion is that what was broken in 5.9 wouldn't be more
broken in 5.10 with these patches (and addresses the performance
regression).

Needless to say, I intend to try and help fixing the issues Thomas
mentioned, and I believe that Mark (cc'd) already has something that
could be used as a healthy starting point (Mark, do correct me if I
misrepresented your work).

Thanks,

	M.

* From v1:
  - Added a new __irq_modify_status() helper
  - Renamed IRQ_NAKED to IRQ_RAW
  - Renamed IRQ_HIDDEN to IRQ_IPI
  - Applied the same workaround to 32bit ARM for completeness

[1] https://lore.kernel.org/r/20201101131430.257038-1-maz@kernel.org/
[2] https://lore.kernel.org/r/87lfewnmdz.fsf@nanos.tec.linutronix.de/

Marc Zyngier (6):
  genirq: Add __irq_modify_status() helper to clear/set special flags
  genirq: Allow an interrupt to be marked as 'raw'
  arm64: Mark the recheduling IPI as raw interrupt
  arm: Mark the recheduling IPI as raw interrupt
  genirq: Drop IRQ_HIDDEN from IRQF_MODIFY_MASK
  genirq: Rename IRQ_HIDDEN to IRQ_IPI

 arch/arm/Kconfig        |  1 +
 arch/arm/kernel/smp.c   |  6 +++++-
 arch/arm64/Kconfig      |  1 +
 arch/arm64/kernel/smp.c |  6 +++++-
 include/linux/irq.h     | 11 ++++++++---
 kernel/irq/Kconfig      |  3 +++
 kernel/irq/chip.c       | 12 ++++++++++--
 kernel/irq/debugfs.c    |  3 ++-
 kernel/irq/irqdesc.c    | 17 ++++++++++++-----
 kernel/irq/proc.c       |  2 +-
 kernel/irq/settings.h   | 33 +++++++++++++++++++++++++++------
 11 files changed, 75 insertions(+), 20 deletions(-)

-- 
2.28.0