[PATCH 4/4] amba: Make use of bus_type functions

[Uwe Kleine-König]

Instead of assigning the needed functions for each driver separately do it
only once in amba_bustype. Move the definition of the functions to their
proper place among the other callbacks used there.

This prepares getting rid of these callbacks in struct device_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/amba/bus.c | 154 ++++++++++++++++++++++-----------------------
 1 file changed, 77 insertions(+), 77 deletions(-)

diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 48b5d4b4e889..2f3799ac3edb 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -174,6 +174,80 @@ static int amba_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return retval;
 }
 
+/*
+ * These are the device model conversion veneers; they convert the
+ * device model structures to our more specific structures.
+ */
+static int amba_probe(struct device *dev)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+	struct amba_driver *pcdrv = to_amba_driver(dev->driver);
+	const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
+	int ret;
+
+	do {
+		ret = of_clk_set_defaults(dev->of_node, false);
+		if (ret < 0)
+			break;
+
+		ret = dev_pm_domain_attach(dev, true);
+		if (ret)
+			break;
+
+		ret = amba_get_enable_pclk(pcdev);
+		if (ret) {
+			dev_pm_domain_detach(dev, true);
+			break;
+		}
+
+		pm_runtime_get_noresume(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+
+		ret = pcdrv->probe(pcdev, id);
+		if (ret == 0)
+			break;
+
+		pm_runtime_disable(dev);
+		pm_runtime_set_suspended(dev);
+		pm_runtime_put_noidle(dev);
+
+		amba_put_disable_pclk(pcdev);
+		dev_pm_domain_detach(dev, true);
+	} while (0);
+
+	return ret;
+}
+
+static int amba_remove(struct device *dev)
+{
+	struct amba_device *pcdev = to_amba_device(dev);
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+
+	pm_runtime_get_sync(dev);
+	if (drv->remove)
+		drv->remove(pcdev);
+	pm_runtime_put_noidle(dev);
+
+	/* Undo the runtime PM settings in amba_probe() */
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+
+	amba_put_disable_pclk(pcdev);
+	dev_pm_domain_detach(dev, true);
+
+	return 0;
+}
+
+static void amba_shutdown(struct device *dev)
+{
+	struct amba_driver *drv = to_amba_driver(dev->driver);
+
+	if (drv->shutdown)
+		drv->shutdown(to_amba_device(dev));
+}
+
 #ifdef CONFIG_PM
 /*
  * Hooks to provide runtime PM of the pclk (bus clock).  It is safe to
@@ -239,6 +313,9 @@ struct bus_type amba_bustype = {
 	.dev_groups	= amba_dev_groups,
 	.match		= amba_match,
 	.uevent		= amba_uevent,
+	.probe		= amba_probe,
+	.remove		= amba_remove,
+	.shutdown	= amba_shutdown,
 	.dma_configure	= platform_dma_configure,
 	.pm		= &amba_pm,
 };
@@ -251,80 +328,6 @@ static int __init amba_init(void)
 
 postcore_initcall(amba_init);
 
-/*
- * These are the device model conversion veneers; they convert the
- * device model structures to our more specific structures.
- */
-static int amba_probe(struct device *dev)
-{
-	struct amba_device *pcdev = to_amba_device(dev);
-	struct amba_driver *pcdrv = to_amba_driver(dev->driver);
-	const struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev);
-	int ret;
-
-	do {
-		ret = of_clk_set_defaults(dev->of_node, false);
-		if (ret < 0)
-			break;
-
-		ret = dev_pm_domain_attach(dev, true);
-		if (ret)
-			break;
-
-		ret = amba_get_enable_pclk(pcdev);
-		if (ret) {
-			dev_pm_domain_detach(dev, true);
-			break;
-		}
-
-		pm_runtime_get_noresume(dev);
-		pm_runtime_set_active(dev);
-		pm_runtime_enable(dev);
-
-		ret = pcdrv->probe(pcdev, id);
-		if (ret == 0)
-			break;
-
-		pm_runtime_disable(dev);
-		pm_runtime_set_suspended(dev);
-		pm_runtime_put_noidle(dev);
-
-		amba_put_disable_pclk(pcdev);
-		dev_pm_domain_detach(dev, true);
-	} while (0);
-
-	return ret;
-}
-
-static int amba_remove(struct device *dev)
-{
-	struct amba_device *pcdev = to_amba_device(dev);
-	struct amba_driver *drv = to_amba_driver(dev->driver);
-
-	pm_runtime_get_sync(dev);
-	if (drv->remove)
-		drv->remove(pcdev);
-	pm_runtime_put_noidle(dev);
-
-	/* Undo the runtime PM settings in amba_probe() */
-	pm_runtime_disable(dev);
-	pm_runtime_set_suspended(dev);
-	pm_runtime_put_noidle(dev);
-
-	amba_put_disable_pclk(pcdev);
-	dev_pm_domain_detach(dev, true);
-
-	return 0;
-}
-
-static void amba_shutdown(struct device *dev)
-{
-	struct amba_driver *drv = to_amba_driver(dev->driver);
-
-	if (drv->shutdown)
-		drv->shutdown(to_amba_device(dev));
-}
-
 /**
  *	amba_driver_register - register an AMBA device driver
  *	@drv: amba device driver structure
@@ -339,9 +342,6 @@ int amba_driver_register(struct amba_driver *drv)
 		return -EINVAL;
 
 	drv->drv.bus = &amba_bustype;
-	drv->drv.probe = amba_probe;
-	drv->drv.remove = amba_remove;
-	drv->drv.shutdown = amba_shutdown;
 
 	return driver_register(&drv->drv);
 }
-- 
2.29.2