[PATCH] ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-poweroff to DT

[Chen-Yu Tsai]

On Tue, Nov 24, 2020 at 12:14 PM Samuel Holland <samuel at sholland.org> wrote:
>
> On 11/23/20 10:10 AM, Michael Klein wrote:
> > Add gpio-poweroff node to allow the board to power itself off after
> > shutdown by disabling the SYSTEM and CPUX regulators (U5 resp. U6).
> > The RST button can be used to restart the board.
>
> The PSCI client will override this driver once the PSCI implementation
> is upgraded to v0.2 or newer functions. So having this around should
> cause no compatibility issues (although it would print an error in dmesg
> at that point). This seems like a reasonable thing to do for the other
> H2+/H3 boards that use a similar regulator layout.

I wonder if this (gpio-poweroff) works if those regulators are also in the DT?

> Reviewed-by: Samuel Holland <samuel at sholland.org>
>
> > Signed-off-by: Michael Klein <michael at fossekall.de>
> > ---
> >  arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> > index 4c6704e4c57e..76e79e6db733 100644
> > --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> > +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
> > @@ -46,6 +46,11 @@ sw4 {
> >               };
> >       };
> >
> > +     gpio_poweroff {
> > +             compatible = "gpio-poweroff";
> > +             gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
> > +     };
> > +
> >       reg_vdd_cpux: vdd-cpux-regulator {
> >               compatible = "regulator-gpio";
> >               regulator-name = "vdd-cpux";
> >
>